FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Springs (Extension) | .032 | .032 wire x 1 lg x .312 od ext spring | 100 |
| ||
| OneMonroe | NC | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | 3/8-16 fin nylon hex jam l/n-s.s. | 75 |
|
| OneMonroe | NC | Hex Head Cap Screw | Steel | Plain | M16-2.00-2.00 x 100 | m16 x 2.0 x 100 hx hd c/s-full thread-pln | 10 |
|
| OneMonroe | NC | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless steel bar latch | 3 |
| ||
| OneMonroe | NC | Quick Release Pin, Spring-Loaded Pin | Steel | Plain | ball lock receiver caps | 4 |
| |
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1/2 mil spec lock washer-s.s. | 25 |
|
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4 | #4 l/washer-s.s. | 400 |
|
| OneMonroe | NC | Barbed Fittings | Brass | 1/2 x 1/4 | 1/2 x 1/4 hose barb x female fitting-brass | 15 |
| |
| OneMonroe | NC | Hex Head Cap Screw | Class 8.8 | Plain | M6-1.00-1.00 x 80 | m6 x 1.0 x 80 gr.cl 8.8 hx hd c/s-pln | 44 |
|
| OneMonroe | NC | Rivet Installation Tools & Accessories | Aluminum | Plain | 3/16 | bm-700 bralo rivet tool sets up to 3/16 blind rivets. .625 stroke 2204 lbs/ft | 1 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain | M16-2.00 x 100 | hex c/s f/t din 933 | 42 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | Grade 8 | Zinc/Yellow | 3/8-16 x 6 | nc tapp bolt z & y | 45 |
|
| Jackson | MS | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/16 x 1 3/4 | concrete flat phillips xylan blue | 3200 |
|
| Jackson | MS | Carriage Bolt | Grade 2 | Galvanized | 1/4 x 1 1/2 | c/b hot dip | 129 |
|
| OneMonroe | NC | Hex Head Cap Screw | Class 8.8 | Plain | M16-2.00-2.00 x 180 | m16 x 2.0 x 180 cl 8.8 hx hd c/s-plain | 25 |
|
| OneMonroe | NC | Wedge Stud Anchor | Steel | Plain | 3/8-16 x 2 1/4 | 3/8-16 x 2-1/4 steel wedge anchor | 297 |
|
| OneMonroe | NC | Wedge Stud Anchor | Steel | Plain | 5/8-11 x 7 | 5/8-11 x 7 steel cement wedge anchor | 11 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80-0.80 | m5 x .8 serr flange nut-s.s. | 2100 |
|
| OneMonroe | NC | Flange Nut, Non-locking | Class 10.9 | Zinc/Clear | M8-1.25-1.25 | m8 x 1.25 cl 10 non-serr flange nut-zp | 1659 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M6-1.00-1.00 x 50 | m6 x 1.0 x 50 hx flange bolt-10.9-pln | 75 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Plain | 1 1/2 x 11 | nc hex c/s gr. 8 | 3 |
|
| Jackson | MS | Round Malleable Washer (Timber Washer) | Iron | Galvanized | 5/8 | hot dip 160/50# box | 600 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25-1.25 x 35 | m8 x 1.25 x 35 hx flange bolt-ss | 80 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25-1.25 x 30 | m8 x 1.25 x 30 hx flange bolt-ss | 67 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Plain | M8-1.25-1.25 x 60 | m8 x 1.25 x 60 hx flange bolt-8.8-pln | 65 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M10-1.25-1.25 x 25 | m10 x 1.25 x 25 hx flange bolt-10.9-zp | 600 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50-1.50 x 30 | m10 x 1.5 x 30 hx flange bolt-ss | 50 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M10-1.50-1.50 x 35 | m10 x 1.5 x 35 hx flange bolt-10.9-pln | 63 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M8-1.25-1.25 x 55 | m8 x 1.25 x 55 hx flange bolt-10.9-pln | 599 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Zinc/Clear | M8-1.25-1.25 x 70 | m8 x 1.25 x 70 hx flange bolt-8.8-zp | 46 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M10-1.50-1.50 x 25 | m10 x 1.5 x 25 hx flange bolt-10.9-pln | 900 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M8-1.00 x 60 | fine pitch hex c/s partially threaded | 15 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M10-1.50-1.50 x 100 | m10 x 1.5 x 100 hx flange bolt-10.9-pln | 31 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Plain | M12-1.75-1.75 x 30 | m12 x 1.75 x 30 cl 8.8 hx flange bolt-pln | 47 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M12-1.75-1.75 x 30 | m12 x 1.75 x 30 hx flange bolt-10.9-zp | 43 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M12-1.75-1.75 x 40 | m12 x 1.75 x 40 hx flange bolt-10.9-zp | 129 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M12-1.75-1.75 x 55 | m12 x 1.75 x 55 hx flange bolt-10.9-zp | 75 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain | M10-1.50-1.50 x 70 | m10 x 1.5 x 70 hx flange bolt-10.9-pln | 43 |
|
| Jackson | MS | Finished Hex Nut | Brass | Plain | 3/8-24 | nf hex nut | 466 |
|
| Jackson | MS | Finished Hex Nut | Grade 8 | Plain | 3/4-16 | nf hex nut dom.. usa | 300 |
|
| OneMonroe | NC | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M12-1.75-1.75 x 60 | m12 x 1.75 x 60 hx flange bolt-10.9-zp | 64 |
|
| TownCountry | AR | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 5/8 x 1 3/4 (1/2-13) | socket sh/b | 48 |
|
| TownCountry | AR | Set Screw (Socket Head) | Steel | Plain | 5/16-18 x 3/8 | socket set knurled w/nylon patch | 2800 |
|
| TownCountry | AR | Set Screw (Socket Head) | Steel | Plain | 3/8-16 x 1/4 | socket set knurled | 200 |
|
| TownCountry | AR | Set Screw (Socket Head) | Steel | Plain | 3/8-16 x 3/8 | socket set knurled w/nylon patch | 4000 |
|
| TownCountry | AR | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/4 | socket set screw 18-8 304 304sst | 89 |
|
| TownCountry | AR | Set Screw (Socket Head) | Steel | Plain | 1/2-13 x 1 1/4 | socket set cup point | 497 |
|
| TownCountry | AR | Set Screw (Square Head) | Steel | Plain | 1/4-20 x 3/8 | square set | 100 |
|
| TownCountry | AR | Set Screw (Square Head) | Steel | Zinc/Clear | 5/16-18 x 1/2 | square set | 1000 |
|
| TownCountry | AR | Set Screw (Square Head) | Steel | Plain | 3/8-16 x 5/8 | square set | 100 |
|
| TownCountry | AR | Knives, Razors, Multifunction Tools | utility knife w/retractable blade | 9 |
| |||
| TownCountry | AR | Knives, Razors, Multifunction Tools | utility knife blades | 1400 |
| |||
| TownCountry | AR | 25 | tape measure 25 stanley #33-425 | 9 |
| |||
| TownCountry | AR | Staples | 5/8 | staple narrow crown 18 gauge | 1 |
| ||
| TownCountry | AR | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/8-16 x 1 3/4 | threaded stud b7 | 1000 |
|
| TownCountry | AR | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/8-16 x 2 | threaded stud b7 | 250 |
|
| TownCountry | AR | Machine Screw | Steel | Plain | dust pan heavy duty | 2 |
| |
| TownCountry | AR | External Type E Retaining Ring (E-Clip) | Steel | Plain | 60 | dust mop frame clip-on | 1 |
|
| TownCountry | AR | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Yellow | 3/8-16 x 3/4 | 3/8-16x3/4 h.w.h. type-23 yellow w/aa-796 microspheres patch yellow | 13903 |
|
| TownCountry | AR | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 3 1/2 | pan phillips type-f #1456fpp | 450 |
|
| TownCountry | AR | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 4 | pan phillips type-f #1464fpp | 400 |
|
| MAINSOURC | NH | Machine Screw | Brass | Plain | 5/16-18 x 3/4 | slotted flat m/s | 113 |
|
| MAINSOURC | NH | Set Screw (Socket Head) | Steel | Black Oxide | M5-0.80 x 5 | socket set cone pt stl blk | 300 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 7/8 | phil fillister m/s 18-8 ss | 274 |
|
| MAINSOURC | NH | T-Nut (Tee Nut) | Steel | Zinc/Black | 1/4-20 x 9/16 | prong t-nut 3/4 od stl black zc | 4000 |
|
| MAINSOURC | NH | Weld Nut | Steel | Zinc/Black | 1/4-20 x 9/16 | rd base weld nut 3/4 od stl black zc | 4961 |
|
| TownCountry | AR | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Galvanized | #12-14 x 1 1/4 | hwh self-drilling long pilot w/undercut epdm washer | 2500 |
|
| TownCountry | AR | Set Screw (Square Head) | Steel | Plain | 3/4-10 x 2 | square set | 50 |
|
| TownCountry | AR | Fender Washer | Steel | Zinc/Clear | 3/16 x 1 | fender | 930 |
|
| TownCountry | AR | Nut Driving Bits, Nutsetters | 5/16 | magnetic nutsetter #hsn15935 | 60 |
| ||
| TownCountry | AR | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/4-7 x 3 | hex c/s | 25 |
|
| TownCountry | AR | Cable Clamps & Ties | 250 01-0900 | safety glasses clear wrap around #250-01-0900 | 48 |
| ||
| TownCountry | AR | Socket Head Cap Screw | Steel | Plain | 1/4-20 x 1/4 | socket c/s | 900 |
|
| TownCountry | AR | Valves & Accessories | weatherhead # 145 external seat draincock #bdc-604-04 | 127 |
| |||
| TownCountry | AR | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 5 | hex c/s gr.5 | 15 |
|
| TownCountry | AR | Service & Repair Kits | Plastic | Plain | plastic cutlery kit 250/cs (knife fork spoon napkin salt & pepper) | 2 |
| |
| TownCountry | AR | Pipe Tee | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/2 | pipe tee 18-8 304 304 | 3 |
|
| TownCountry | AR | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 | oval phillips type-a tapping 18-8 | 500 |
|
| TownCountry | AR | Carriage Bolt | Grade 2 | Zinc/Clear | 3/8-16 x 3/4 | 3/8-16x3/4 c/b gr.2 | 58000 |
|
| TownCountry | AR | Hex Tap Bolt (Fully Threaded) | Grade 8 | Zinc/Yellow | 3/4-10 x 3 | hex t/b | 20 |
|
| TownCountry | AR | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 3/4 | internal tooth lock | 377 |
|
| TownCountry | AR | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | flat phillips | 18000 |
|
| TownCountry | AR | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 1/2 | round slotted | 2000 |
|
| TownCountry | AR | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Grade 5 | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20x3/4 flanged serrated whiz lock screw gr.5 | 1250 |
|
| TownCountry | AR | Flat Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 3/4 | flat socket c/s | 859 |
|
| TownCountry | AR | Screwdriving Insert Bits & Power Bits | t40 1 15/16 | t40 torx bits 1 15/16 o.a.l. | 15 |
| ||
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 1/2-8 x 9 1/2 | 1-1/2-8x9-1/2 o/a a193 b16 all thread stud plain | 91 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1 1/4-8 x 6 3/4 | 1-1/4-8x6-3/4 o/a a193 b8m ss all thread stud | 15 |
|
| SunPack | FL | Carriage Bolt | Steel | Plain | 5/16-18 x 2 1105/1280 | 5/16-18x2-1/2 carriage bolt 1105/1280 sermagard | 14 |
|
| SunPack | FL | Threaded Rod | Grade B16 | Plain | 3-8 x 12 | 3-8x12 a193 b16 all thread rod plain | 30 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 3/4-10 x 10 3/4 | 3/4-10x10-3/4 o/a a193 b16 all thread stud plain | 24 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 1/2-13 x 3 3/4 | 1/2-13x3-3/4 o/a a193 b7m all thread stud plain | 13 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Grade B8M | Plain | 1/4-20 x 1 3/4 | 1/4-20x1 3/4 a193 b8m hvy hex tap bolt domestic full thread | 50 |
|
| SunPack | FL | Coupling Nut | Steel | Galvanized | 3/4-10 x 2 1/4 | 3/4-10x2-1/4 coupling nut hdg | 12 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 1 1/8-8 x 7 1/2 | 1-1/8-8x7-1/2 a193 b7m all thread stud w/2 a194 2hm hvy hex nuts plain domestic | 1 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8M | Plain | 1-8 x 4 1/2 | 1-8x4-1/2 a193 b8m ss hvy hex bolt | 112 |
|
| SunPack | FL | Machine Screw | Brass | Plain | #8-32 x 1 1/2 | #8-32x1-1/2 brass round slotted machine screw | 27 |
|
| SunPack | FL | Drop-In Style Anchor | Steel | Zinc/Clear | 1/2 | 1/2 drop-in anchor zinc-50 per box | 2,950 |
|
| SunPack | FL | Threaded Rod | Grade B16 | Plain | 1 1/2-8 x 12 | 1-1/2-8x12 a193 b16 all thread rod plain | 208 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 3/8-16 x 2 1/2 | 3/8-16x2-1/2 o/a a193 b8m ss all thread stud | 78 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/2-13 x 3 3/4 | 1/2-13x3-3/4 o/a a193 b8m ss all thread stud ptfe yellow | 12 |
|
| SunPack | FL | Threaded Rod | Grade B16 | Plain | 1 7/8-8 x 12 | 1-7/8-8x12 a193 b16 all thread rod plain | 330 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8M | Plain | 7/8-9 x 3 | 7/8-9x3 a193 b8m ss hvy hex bolt | 32 |
|
| SunPack | FL | Threaded Rod | Grade B8M | Plain | 1 1/4-8 x 12 | 1-1/4-8x12 a193 b8m ss all thread rod domestic | 251 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1 1/8-8 x 7 | 1-1/8-8x7 o/a a193 b8m ss all thread stud | 1 |
|
| SunPack | FL | Coupling Nut | Steel | Zinc/Clear | 3/8-16 x 1 3/4 | 3/8-16x1-3/4 coupling nut zinc | 2,029 |
|
| Cal Fastenrs | CA | Hex Jam Nut | Steel | Zinc/Clear | 3/8-24 | hex finish jam nut l.h. thrd | 900 |
|
| Cal Fastenrs | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 1/4 | phillips pan m/s 18-8 304 phillips pan | 704 |
|
| Cal Fastenrs | CA | Lock Nut, Nylon Insert | Steel | Plain | #2-56 | hex nut black hex nut volt nh-256-b | 10,000 |
|
| Cal Fastenrs | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 4 | socket set-cup pt 18-8 304 /bn 621 din 916 | 101 |
|
| Cal Fastenrs | CA | Machine Screw | Steel | Zinc/Clear | M3-0.50 x 30 | phillip pan din 7985a bn 384 m3 x 30 din 7985a bn 384 m3 x 30 | 790 |
|
| Cal Fastenrs | CA | Cable Clamps & Ties | Nylon (Polyamide) | Plain | heyco # 3380 .625 diam. heavy duty black cable clamp /HEYCO3380 | 1,000 |
| |
| Cal Fastenrs | CA | Machine Screw | Steel | Chromate Conversion (Iridite, Alodine) | #6-32 x 1 | 6-32 x 1 phillips pan w/ gold irradite 6C100MXPY | 5,000 |
|
| Cal Fastenrs | CA | Curved/Wave Spring Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .135 x .245 x .004 | .135 id x .245 od x .004 thk curved spring 18-8 304 | 1,000 |
|
| Cal Fastenrs | CA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 9/16 | extra-duty split l/w 304 s.s. id .564-.574 od 1.035 max thk .182 | 500 |
|
| Cal Fastenrs | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .091 x .158 x .015 | flat 18-8 304 | 2,100 |
|
| Cal Fastenrs | CA | Set Screw (Socket Head) | Steel | Black Oxide | M3-0.50 x 6 | socket set-cup pt 45h -blk ox & wax din 916 din 916 | 48 |
|
| Cal Fastenrs | CA | Socket Head Cap Screw | Steel | Black Oxide | #8-32 x 5/8 | socket c/s -alloy -blk ox & wax skt c/s | 180 |
|
| Cal Fastenrs | CA | SAE Flat Washer | Steel | Zinc/Clear | 1/4 | SAE flat Cr3+ plate | 42,883 |
|
| Cal Fastenrs | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 5/8 | phillips oval sheet metal type-a phillips oval sheet metal | 1,650 |
|
| Cal Fastenrs | CA | Set Screw (Socket Head) | Steel | Black Oxide | M3-0.50 x 8 | socket set-full dog pt 45h -blk ox & wax socket set dg | 500 |
|
| Cal Fastenrs | CA | Shoulder Washer (Screw Insulator) | Steel | Plain | #4 | shoulder -polyphenylene sulfide | 100 |
|
| Cal Fastenrs | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Nylon (Polyamide) | Plain | 1/4-20 | hex nylok nut black lock nut nyl 25CNNEE | 6,000 |
|
| Cal Fastenrs | CA | Button Head Socket Cap Screw | Steel | Plain | 5/16-18 x 1/2 | soc button -alloy skt btn | 50 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Steel | Zinc/Yellow | 5/16-18 | hex finish nut dc ii hex nuts | 2,170 |
|
| Cal Fastenrs | CA | Machine Screw | Steel | Zinc/Black | #8-32 x 1/2 | phillips pan m/s black phillips pan | 530 |
|
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 2 | 5/16-18 x 2 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 300 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 3 | 5/16-18 x 3 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 1000 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 | 3/8-16 x 1 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 100 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 450 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 2700 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 3 | 3/8-16 x 3 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 282 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 600 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 1 | 6-32 x 1 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 131 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 1 1/2 | 6-32 x 1-1/2 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 4500 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 1/4 | 6-32 x 1/4 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 19000 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 5/16 | 6-32 x 5/16 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 2500 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1 | 8-32 x 1 phillips flat 82 degree | countersink head machine screw a sme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 2500 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1 1/2 | 8-32 x 1-1/2 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 500 |
| |
| Brikksen | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 3/8 | 8-32 x 3/8 phillips flat 82 degree | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | countersink head machine screw asme b18.6.3 316 stainless steel | 736 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #0-80 x 3/16 | 0-80 x 3/16 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | 105000 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | 10-24 x 1 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | 13123 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #10-24 x 1 | 10-24 x 1 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | 791 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/8 | 10-24 x 1-1/8 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | 51000 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/4 | 10-24 x 1-1/4 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | countersink head machine screw asme b18.6.3 18.8 stainless steel | 270 |
| |
| Brikksen | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #10-24 x 1 1/4 | 10-24 x 1-1/4 phillips flat 82 degree | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | countersink head machine screw asme b18.6.3 18.8 stainless steel chrome plate | 2388 |
| |
| MetricThrd | CA | Sems Machine Screw | Class 8.8 | Zinc/Yellow | M8 x 20 | m 8 x 20/15.5 jis b 1187-b-8.8 yzn cr3 phil ind hex hd sems w/sw/fw jis f/th 12af | 7,855 |
|
| MetricThrd | CA | Sems Machine Screw | Class 8.8 | Zinc/Yellow | M8 x 25 | m 8 x 25/15.5 jis b 1187-b-8.8 yzn cr3 phil ind hex hd sems w/sw/fw jis f/th 12af | 13,172 |
|
| MetricThrd | CA | Sems Machine Screw | Class 8.8 | Zinc/Yellow | M8 x 30 | m 8 x 30/15.5 jis b 1187-b-8.8 yzn cr3 phil ind hex hd sems w/sw/fw jis f/th 12af | 12,011 |
|
| MetricThrd | CA | Sems Machine Screw | Class 8.8 | Zinc/Yellow | M8 x 35 | m 8 x 35/15.5 jis b 1187-b-8.8 yzn cr3 phil ind hex hd sems w/sw/fw jis f/th 12af | 15,912 |
|
| MetricThrd | CA | Sems Machine Screw | Class 8.8 | Zinc/Yellow | M8 x 40 | m 8 x 40/15.5 jis b 1187-b-8.8 yzn cr3 phil ind hex hd sems w/sw/fw jis f/th 12af | 25,326 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M4 x 12 | m 4 x 12 jis b 1189-10.9 zn flange bolts jis f/th | 47,340 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M4 x 16 | m 4 x 16 jis b 1189-10.9 zn flange bolts jis f/th | 38,250 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M4 x 20 | m 4 x 20 jis b 1189-10.9 zn flange bolts jis f/th | 103,930 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M5 x 8 | m 5 x 8 jis b 1189-10.9 zn flange bolts jis f/th | 139,200 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M5 x 40 | m 5 x 40 jis b 1189-10.9 zn flange bolts jis f/th | 21,990 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 18 | m 6 x 18 jis b 1189-10.9 zn flange bolts jis f/th | 49,335 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 30 | m 6 x 30/30 jis b 1189-10.9 zn flange bolts jis f/th | 20,990 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 35 | m 6 x 35 jis b 1189-10.9 zn flange bolts jis | 40,277 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 35 | m 6 x 35/35 jis b 1189-10.9 zn flange bolts jis f/th | 11,322 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 40 | m 6 x 40 jis b 1189-10.9 zn flange bolts jis | 25,965 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 60 | m 6 x 60 jis b 1189-10.9 zn flange bolts jis | 12,627 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 65 | m 6 x 65 jis b 1189-10.9 zn flange bolts jis | 23,947 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 70 | m 6 x 70 jis b 1189-10.9 zn flange bolts jis | 15,905 |
|
| MetricThrd | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6 x 75 | m 6 x 75 jis b 1189-10.9 zn flange bolts jis | 17,958 |
|
| Jackson | MS | Threaded Rod (Acme Thread) | Steel | Plain | 1 1/2-4 x 12 | 1 1/2-4x12' acme threaded rod | 1 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8M | Plain | 3/4-10 x 4 1/2 | 3/4-10x4-1/2 a193 b8m ss hvy hex bolt | 16 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1 1/8-8 x 5 | 1-1/8-8x5 o/a a193 b8m ss all thread stud | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 5/8-11 x 6 | 5/8-11x6 o/a a193 b8 class 2 ss all thread stud | 8 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1/2-13 x 2 1/4 | 1/2-13x2-1/4 o/a a193 b8m ss all thread stud | 48 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 3/4-10 x 10 | 3/4-10x10 o/a a193 b8 class 2 ss all thread stud | 16 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
