FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| ONE STOP | CO | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 7/16-20 | 7/16-20 grade c lock automation style lock nut | 1000 |
|
| OneMonroe | NC | T-Nut (Tee Nut) | Steel | Zinc/Clear | #10-24 x 5/16 | 10-24x5/16 tee nut 3 prong zinc | 369 |
|
| OneMonroe | NC | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain / Furnace Black | 1/4-20 | 1/4-20 panel range .025-.150 center 25/32 extruded u nut | 10 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 | 3/8-24 18-8 stainless steel serrated flange nut | 12980 |
|
| OneMonroe | NC | Hex Jam Nut | ms35914-254 | 5 |
| |||
| OneMonroe | NC | Machine Screw Nut | Cadmium/Yellow | #6-32 | ms35649-262 | 35 |
| |
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | M4 | 4mm hex nut | 37 |
|
| OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | nut wing type-a steel/zinc | 580 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 | nut 8-32 low crown hex cap nut 18 8 stainless steel 500/ctn | 130 |
|
| OneMonroe | NC | Heavy Hex Nut | Grade 2H | Galvanized | 1/2-8 | 1 1/2-8 2h hvy hexnut hot dip galv | 17 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Grade 8 | Phosphate | 1/2-13 | 1/2-13 grade 8 phosphate and oil serrated flange nut | 156 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5 | m2.5 mm hex nut stainless | 30 |
|
| OneMonroe | NC | Slotted Round Nut (Shaft Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-25-25 | cstrnylttl lckstnlsstm 4in nylon total lock m10x25mm stainless stem stainless swivel bearing grey tpr tire stainless axle | 25 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | 5/16-18 | weld nut square short pilot projection 5/16-18 thread steel | 185 |
|
| OneMonroe | NC | Hex Jam Nut | Steel | Plain / Furnace Black | 2-12 | 2-12 hex fin jam nut | 3 |
|
| OneMonroe | NC | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 2-8 | 2-8 2h hvy hexnut | 8 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | #10-32 | nut 10-32 spot weld offset hole tab weld nut plain 1000/ctn | 365 |
|
| OneMonroe | NC | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Black | #10-32 | 10-32 two-way hex lock nut black zinc wax | 6 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-heavy hex standard height (nu series) steel zinc | 262 |
| |
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-light hex standard height (nm & ne series) steel zinc | 180 |
| |
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 1/2-13 | 1/2-13 a194/sa194 2h heavy hex nuts coarse med. carbon plain | 1288 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | 1 1/4-12 | 1 1/4-12 hex finish nut | 14 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 9/16-12 | 9/16-12 hex jam nut zinc | 100 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | hood adjustment nut | 3 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Plain / Furnace Black | acorn nut | 19 |
| |
| RePneu To | MI | Finished Hex Nut | Class 10.9 | Zinc/Clear | M5-0.80 | m5-0.80 hex nuts class 10 zinc cr+3 din 934 | 15000 |
|
| MAINSOURC | NH | Hex Jam Nut | Steel | Plain / Furnace Black | 1-14 | hex fin jam nut case-hard (1-1/2x3/8) stl blk | 50 |
|
| Global | CA | Machine Screw Nut | 316, 317, A4 Stainless | Plain / Furnace Black | #6-32 | machine screw nut 316 | 470 |
|
| Global | CA | Finished Hex Nut | Steel | Zinc/Clear | 3/4-10 | hex nut i | 19 |
|
| Global | CA | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2-56 | MS35649-224 | 75 |
|
| Global | CA | Machine Screw Nut | Steel | Zinc/Clear | 5/16-18 | machine screw nut i | 900 |
|
| Global | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 | nylon insert locknut 18-8 ss | 7,861 |
|
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain / Furnace Black | c1663-012-3b tinnerman C1663123B | 270 |
| |
| Century | FL | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 3/4-10 | 3/4-10 heavy hx nut grd. 2h astm a194 | 108 |
|
| Century | FL | Finished Hex Nut | Steel | Galvanized | 1/4-20 | 1/4-20 finish hex nut steel ht dp galv | 108 |
|
| Global | CA | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #10-32 | wing nut 18-8 ss passivate | 65 |
|
| Century | FL | Machine Screw Nut | Steel | Cadmium/Yellow | #4-40 | ms35649-242 nut | 704 |
|
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Cadmium | 5/8-11 | 5/8-11 prevailing torque lock nut grade c steel zinc or cad plated dim per print | 42432 |
|
| Century | FL | Finished Hex Nut | Steel | Zinc/Clear | eaton 15-1577 nut per print plated per 50-286-7a | 19222 |
| |
| Global | CA | Finished Hex Nut | Steel | Zinc/Clear | 1/4-20 | hex nut i | 4,342 |
|
| Global | CA | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 | machine screw nut 18-8 ss | 1,919 |
|
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain / Furnace Black | c991-440-3b tinnerman C9914403B | 15 |
| |
| Global | CA | Finished Hex Nut | Class 12.9 | Plain / Furnace Black | 3/8-16 | hex nut (12.9) | 4,594 |
|
| Global | CA | Hex Head Cap Screw | Steel | 06 | nas696c06m nut | 79 |
| |
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain / Furnace Black | c8681-832 tinnerman C8681832 | 161 |
| |
| Global | CA | Hex Jam Nut | Steel | Zinc/Clear | 3/4-10 | hex jam nut i | 299 |
|
| Global | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1032 x 3/8 | hex nut shoulder ss nuts | 10,165 |
|
| Global | CA | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain / Furnace Black | 04 | nas1068rc04m self-locking nut plate mil 4-40 thd x 0.498 l iron/pa 4-40 thd x 0.498 l iron/pa | 5 |
|
| Global | CA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Plain / Furnace Black | c31758-m508-3b g-nut retainer zi/et m5-8 thdx0.060-0.070 range | 21 |
| |
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | nas1068rc3m self-locking nut plate mil 10-32 thd x 0.739 l iron 10-32 thd x 0.739 l iron | 4 |
| |
| Century | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5 | m2.5 18-8 nut hex metr m2.5 5mmw 1.66mmh din 439 | 4599 |
|
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | rmlha27m-2860-62 self-locking nut plate 0.455 lx0.266 wx0.025 th | 20 |
| |
| Global | CA | Cap Nut (Acorn Nut) | Brass | Plain / Furnace Black | 1/4-20 | acorn cap nut | 4 |
|
| Century | FL | Hex Jam Nut | Steel | Zinc/Yellow | 1/4-28 | 1/4-28 fin hex jam nut steel zinc yellow | 3331 |
|
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade 5 | Zinc/Yellow | 5/16-18 | 5/16-18 stover locknut grade 5 zi & yel zinc/yellow | 2940 |
|
| Century | FL | Finished Hex Nut | Steel | Zinc/Clear | 1 | parker 15036-01 stroke control nut q5b steel zinc(.0001/.0002)see print rev 1 | 2550 |
|
| Global | CA | Finished Hex Nut | 316, 317, A4 Stainless | Passivated | 5/16-18 | hex nut 316 ss passivate | 500 |
|
| Global | CA | Hex Jam Nut | Steel | Zinc/Clear | 1/2-13 | hex jam nut i | 14 |
|
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M20-2.50 | class 10 m20x2.5 zinc plate din 980v | 15 |
|
| Global | CA | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 1 | zn1 valco instruments-internal 1/16 nut internal fitting | 25 |
|
| Century | FL | Finished Hex Nut | Aluminum | Plain / Furnace Black | 1/2-13 | 1/2-13 finish hex nut aluminum | 700 |
|
| Global | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | M6-1.00 | M6-1.0 hex nut kep conical washer steel zinc | 8 |
|
| Global | CA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | #2-56 | 2-56 nylon insert locknut steel zinc iii clear rohs | 2,930 |
|
| Century | FL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 2.0 | m 2.0 steel zinc plt hex lock nuts nylon insert din 985 | 200 |
|
| Century | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | nut finished hex 1/4-20 hex nut 18-8 with metal guard wax 916 | 195 |
|
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-cls-0616-2 self-clinching nut 9/16 (0.563) od 0.499 id 0.125 min panel thickness 3/8-16 thread. 18-8 304 steel/passivate | 448 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-clss-m5-2 self-clinching nut 8.70 mm od 6.33 mm id 1.4 mm min panel thickness m5x0.8 thread. 18-8 304 steel/passivate | 87,266 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | gs-feox-440 minature self-clinching nut 0.192 od 0.145 id 0.39-0.045 min panel th 0.040 shank l. 4-40 thread. 18-8 304 steel | 8 |
| |
| Century | FL | Lock Nut, Nylon Insert | Plain / Furnace Black | 1/2-13 | ms17829-8c | 119 |
| |
| Global | CA | Weld Nut | Copper | Plain / Furnace Black | gs-wn-632 minature self-locking weld nut 0.341 od 0.094 th 0.315 id 6-32 thread carbon steel/copper | 18 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | gs-ac-032-1 floating self-clinching nut 10-32 thread 0.38 min panel thickness 18-8 304 steel | 116 |
| |
| GOEBEL | TX | Spring Steel Lock Nut (PalNut, etc.) | Steel | Plain / Furnace Black | counter nut for go-rn1/rn2/sn1 for go-rn1/rn2/sn1 | 404 |
| |
| Global | CA | Panel Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M4-0.70 | gs-clss-024-2 self-clinching nut mod thread m4 x 0.7 11/32 (0.340) od 0.249 id 0.056 min panel thickness m4 x 0.7 thread. stainless steel/passivate | 245 |
|
| Century | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-1.50 | m16.0 x 1.5 b hx jam nut 18-8 din 439 | 16 |
|
| Century | FL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-20 | 1/2-20 nte ny in locknut steel zinc | 1360 |
|
| Global | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/8-14 | thin nylon ins l/n 18-8 nte locknut 303ss | 225 |
|
| Global | CA | Finished Hex Nut | Nylon (Polyamide) | Plain / Furnace Black | ms51858-7 nylon hex nut military 7/16 af x 17/64 th x 1/4-20 thd 7/16 af x 17/64 th x 1/4-20 thd | 2 |
| |
| Century | FL | Coupling Nut | nas1351n08lb4 | 138 |
| |||
| Global | CA | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 45/8 x 0.063 t4.50 | 2-047-n0552-90 parker seal o-ring 4.625 odx0.063 thx4.50 id | 1 |
|
| Global | CA | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain / Furnace Black | 06 | nas1068c06m self-locking nut plate mil 6-32 thd x 0.545 l st/cad 6-32 thd x 0.545 l st/cad | 41 |
|
| Global | CA | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | gs-cls-0420-2 self-clinching nut 0.440 od 0.343 id 0.090 min panel thickness 1/4-20 thread. stainless steel/passivate | 332 |
| |
| Global | CA | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | gs-cls-0420-3 self-clinching nut 0.440 od 0.343 id 0.125 min panel thickness 1/4-20 thread. stainless steel/passivate | 178 |
| |
| Global | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-cls-0428-1 self-clinching nut 0.440 od 0.343 id 0.056 min panel thickness 1/4-28 thread. 18-8 304 steel/passivate | 1,762 |
| |
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-lac-440-2 floating self-locking nut 0.360 od 0.054 shank length 4-40 thread 18-8 304 steel/passivate | 2,238 |
| |
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | #8-32 | gs-las-832-2 floating self-locking nut 0.440 od 0.054 shank length 8-32 thread steel | 340 |
|
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | #2-56 | gs-ms-256-0 self-clinching nut 0.250 od 0.030 shank length 0.030 min panel thickness 2-56 thread steel | 91 |
|
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | gs-s-0616-2 self-clinching nut 0.563 od 0.120 shank length 3/8-16 thread heat-treated carbon steel | 450 |
| |
| Global | CA | Self-Clinching Nut | Steel | Plain / Furnace Black | gs-s-832-0 self-clinching nut 0.312 od 0.030 shank length 8-32 thread heat-treated carbon steel | 860 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2-1 self-clinching nut 6.35 mm od 0.97 mm length 1 mm min panel m2x0.4 thread carbon steel/zinc | 2,991 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2-2 self-clinching nut 6.35 mm od 1.38 mm length 1.4 mm min panel m2x0.4 thread carbon steel/zinc | 553 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m2.5-2 self-clinching nut 6.35 mm od 1.38 mm length 1.4 mm min panel m2.5x0.45 thread carbon steel/zinc | 674 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-0 self-clinching nut 6.35 mm od 0.77 length 0.8 mm min panel m3x0.5 thread carbon steel/zinc | 5,038 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-1 self-clinching nut 6.35 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/zinc | 25,060 |
| |
| Global | CA | Self-Clinching Nut | Steel | Black Oxide | gs-s-m3-1 self-clinching nut 6.35 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/black oxide | 786 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3-2 self-clinching nut 6.35 mm od 1.38 length 1.4 mm min panel m3x0.5 thread carbon steel/zinc | 1,600 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-0 self-clinching nut 7.11 mm od 0.77 length 0.8 mm min panel m3x0.5 thread carbon steel/zinc | 43,860 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-1 self-clinching nut 7.11 mm od 0.97 length 1 mm min panel m3x0.5 thread carbon steel/zinc | 33,570 |
| |
| Global | CA | Self-Clinching Nut | Steel | Zinc/Clear | gs-s-m3.5-2 self-clinching nut 7.11 mm od 1.38 length 1.4 mm min panel m3x0.5 thread carbon steel/zinc | 1,436 |
| |
| Century | FL | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | captive fast. q2178/mcmaster 94674a540 flush mount captive nut 18-8 per print | 800 |
| |
| Century | FL | Finished Hex Nut | b1821bh056f125n | 14 |
| |||
| Century | FL | Weld Nut | Plain / Furnace Black | #10-24 | 10-24 weld nut round base plain | 800 |
| |
| Century | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5 | m 5.0 18-8 hex jam nuts din 439 | 795 |
|
| Century | FL | Castle Nut (Hex) | ms21905v4p | 27 |
| |||
| Century | FL | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Plain / Furnace Black | 93 | 93400495 lock nut rev d | 700 |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Plain / Furnace Black | 15 | speed nut c1505-1024-4eq_x000d_10-24 u nut old part number un10241153po c1505-1024-4eq_x000d_10-24 u nut old part number un10241153po | 70000 |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | #16 | speed nut c166-1420-ebgeq c166 1/4-20 speed nut zinc c166-1420-ebgeq c166 1/4-20 speed nut zinc | 40000 |
|
| IndexFast | CA | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | #8-32 | lock nut de832075ebgeqregular type lock nut 8-32 steel/zinc electro de832075ebgeqregular type lock nut 8-32 steel/zinc electro | 17000 |
|
| VIKING BO | OR | Heavy Hex Nut | Grade 2H | Zinc/Yellow | 5/8-11 | 800 |
| |
| VIKING BO | OR | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 1/2-20 | 1895 |
| |
| VIKING BO | OR | Hex Jam Nut | Steel | Zinc/Yellow | 5/8-11 | 6 |
| |
| VIKING BO | OR | Hex Jam Nut | Grade 2 | Plain / Furnace Black | 1-1/4-7 | 69 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 1/2-13 | 79 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 9/16-12 | 996 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 5/8-11 | 388 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 3/4-10 | 162 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 8 | Zinc/Yellow | 5/16-18 | 2473 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 8 | Zinc/Yellow | 9/16-12 | 103 |
| |
| VIKING BO | OR | Finished Hex Nut | Grade 5 | Zinc/Yellow | 5/8-11 | 600 |
| |
| VIKING BO | OR | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 8-32 | 1271 |
| |
| American | NY | Finished Hex Nut | Steel | Zinc/Clear | M10-1.50 | 10-1.5 pitch hex fin nut zp din 934 | 1700 |
|
| Weaver | WA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M8-1.00 | 8-1.0 nylock nut zinc | 20 |
|
| Weaver | WA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 30-3.5 | 30-3.5 nylock nut zinc | 8 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Zinc/Clear | 9/16-18 | 9/16-18 slotted hex nut zinc | 40 |
|
| Weaver | WA | Coupling Nut | Steel | Plain / Furnace Black | 3/8-16 | 3/8-16 short coupling nut plain | 40 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 3/4-16 | 3/4-16 l.h. jam nut zinc | 15 |
|
| Weaver | WA | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | M6-1.00 | 6-1.0 acorn/cap nut zinc | 39 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Plain / Furnace Black | 2-4 1/2 | 2-4.5 slotted hex nut plain | 1 |
|
| Weaver | WA | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 | 8-1.25 acorn/cap nut 18-8 ss | 4 |
|
| Weaver | WA | Finished Hex Nut | Brass | Plain / Furnace Black | 1 1/4-12 | 1 1/4-12 hex nuts brass | 20 |
|
| Weaver | WA | Wheel Nut | Steel | Zinc/Clear | M12-1.50 | 12-1.5 lug nuts zinc | 38 |
|
| Weaver | WA | Square Nut | Steel | Plain / Furnace Black | 5-.8 | 5-.8 square nut plain | 175 |
|
| Weaver | WA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 16-1.5 | 16-1.5 nylock nut 18-8 ss | 14 |
|
| Weaver | WA | Hex Jam Nut | Steel | Plain / Furnace Black | 10-1.0 | 10-1.0 jam nut plain | 45 |
|
| Weaver | WA | Hex Jam Nut | Steel | Zinc/Clear | 24-2.0 | 24-2.0 jam nut zinc | 9 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | M10-1.50 | 10-1.5 castle nut zinc | 88 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 10-1.0 | 10-1.0 castle nut zinc | 17 | < b>
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | M12-1.75 | 12-1.75 castle nut zinc | 13 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 18-2.5 | 18-2.5 castle nut zinc | 38 |
|
| Weaver | WA | Castle Nut (Hex) | Steel | Zinc/Clear | 20-2.5 | 20-2.5 castle nut zinc | 16 |
|
| Weaver | WA | Slotted Hex Nut | Steel | Plain / Furnace Black | M8-1.25 | 8-1.25 slotted hex nut plain | 86 |
|
| American | NY | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | #4-40 | 4/40 nylon insert stop nut | 2000 |
|
| Weaver | WA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.25 | 10-1.25 jam nut 18-8 ss | 49 |
|
| RePneu To | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | bimba air reservoir 17 lng | 1 |
| |
| RePneu To | MI | Machine Screw Nut | Grade 5 | Zinc/Clear | #8-32 x 11/32 x 1/8 | #8-32x11/32 x1/8 hex machine screw nut low carbon zinc | 15000 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
