FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | alum .060 1.75 x84 .125 pin | 5 |
| ||||
| OneMonroe | NC | alum hng .040 x .75 x 96 | 10 |
| ||||
| OneMonroe | NC | alum hng .040 x 1.06 x 48 | 48 |
| ||||
| OneMonroe | NC | alum hng .040 x 1.06 x 96 | 100 |
| ||||
| OneMonroe | NC | alum hng .040 x 1.25 x 96 | 68 |
| ||||
| OneMonroe | NC | alum hng .040 x 1.5 x 48 | 48 |
| ||||
| OneMonroe | NC | Hinges | 3 x 96 | 741 al 3 x 96 hinge | 1 |
| ||
| OneMonroe | NC | Hinges | 1.5 x 72 | 747 al 1.5 x 72 hinge | 17 |
| ||
| OneMonroe | NC | Finished Hex Nut | Steel | Plain | #8-32 x 1 | cla-832-1 nut al #8-32 x 1 | 1819 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 8 | 8 pneu casters 2s 2r | 1 |
| ||
| OneMonroe | NC | Hinges | Aluminum | 2.00 x 72 | 901 aluminum hinge 2.00 x 72 .250 dia pin staked 1.00 knuckle mill finish | 20 |
| |
| OneMonroe | NC | Machine Bushings | Plain | 1 1/2 x 1 x 14 | 1-1/2 x 1 x 14 ga. reg.mach bush | 20 |
| |
| OneMonroe | NC | Machine Bushings | Steel | Zinc/Clear | 1 1/4 x 3/4 x 14 | 1-1/4 x 3/4 x 14ga machine bushing-znc | 20 |
|
| OneMonroe | NC | Machine Bushings | Plain | 1 1/4 x 9/16 x 14 | 1-1/4 x 9/16 x 14ga machine bushing | 50 |
| |
| OneMonroe | NC | Machine Bushings | Steel | Zinc/Clear | 2-1/8 x 1 3/8 x 14 | 2-1/8 x 1-3/8 x 14 ga. reg.mach bush-zinc | 25 |
|
| OneMonroe | NC | External Thread Insert, Self-Tapping Insert | Steel | Zinc/Yellow | #8-32 (.080-.130) | insert hex 8-32 threadgrip .080-.130 steel/yellow zinc 5000/cs | 500 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | #10-32 | insert 10-32 .020-.130gr flat head hex body steel/zinc-yellow | 30 |
|
| OneMonroe | NC | External Thread Insert, Self-Tapping Insert | Steel | Zinc/Clear | #10-32 (.020-.130) | insert hex 10-32 threadgrip .020-.130 steel/clear zinc 4000/cs | 2464 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Yellow | 1/4-20 | insert 1/4-20 .027-.165gr flat head hex body closed end steel/zinc-yellow | 900 |
|
| OneMonroe | NC | External Thread Insert, Self-Tapping Insert | Steel | Zinc/Clear | 5/16-18 (.027-.150) | insert hex 5/16-18 threadgrip .027-.150 steel/zinc plating 1750/cs | 1000 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
