FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Shaft Collars, & Adjusting Rings | Plain | 3/4 | 3/4 split shaft collar | 2 |
| ||
| RePneu To | MI | Rivet Installation Tools & Accessories | Plain | go-200 lithium cordless rivet tool | 1 |
| ||
| RePneu To | MI | Latches & Catches | M13.6 | hafele 246.19.101 magnetic catch 2.53.5 kg pull for 13.6 mm drill hole | 302 |
| ||
| RePneu To | MI | Dowel Pin | ASTM A574 | Plain | 5/8 x 1 3/4 | 5/8 x1 3/4 dowel pins alloy thru-hardened | 50 |
|
| RePneu To | MI | Pull-Out Dowel Pin (Threaded Pin) | Grade 8 | Plain | 1/4 x 1 | 1/4 x1 dowel pins alloy pull-out | 15 |
|
| RePneu To | MI | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/8 x 1 | 1/8 x1 cotter pins extended prong square cut zinc cr+3 | 2500 |
|
| RePneu To | MI | Pull-Out Dowel Pin (Threaded Pin) | Grade 8 | Plain | 1/4 x 2 1/2 | 1/4 x2 1/2 dowel pins alloy pull-out | 18 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Zinc/Clear | 1/2-13 | 1/2-13 hex nuts a194/sa194 2h heavy coarse zinc cr+3 | 1941 |
|
| RePneu To | MI | Blind Rivet | Plain | 3/4 (.626-.750) | 3/4 to 1-1/2 wire grip puller | 3 |
| |
| RePneu To | MI | Finished Hex Nut | Grade 8 | Plain | 2-12 | 2-12 hex nuts grade 8 fine med. carbon | 10 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/2-6 | 1 1/2-6 heavy hdg/wax/blue dye hex nuts a194/sa194 2h heavy hdg/wax/blue dye | 48 |
|
| RePneu To | MI | Heavy Hex Nut | Grade A | Zinc/Clear | 3/8-16 | 3/8-16 heavy hex nuts a563 grade a coarse zinc cr+3 | 1439 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Galvanized | 1-8 | 1-8 heavy hdg/wax/blue dye hex nuts a194/sa194 2h heavy hdg/wax/blue dye | 438 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/4-7 | 1 1/4-7 heavy hdg/wax/blue dye hex nuts a194/sa194 2h heavy hdg/wax/blue dye | 80 |
|
| RePneu To | MI | Heavy Hex Nut | Grade A | Zinc/Clear | 1-8 | 1-8 heavy hex nuts a563 grade a coarse zinc cr+3 | 118 |
|
| RePneu To | MI | USS Flat Washer | Grade 2 | Zinc/Clear | 5/8 | 5/8 flat washers low carbon uss zinc cr+3 | 3811 |
|
| RePneu To | MI | F436 Round Structural Washer | Steel | Plain | 1 x 2 | 1 x2 f436 structural flat washers med. carbon plain | 2863 |
|
| RePneu To | MI | F436 Round Structural Washer | Steel | Plain | 1 1/8 x 2 1/4 | 1 1/8 x2 1/4 f436 structural flat washers med. carbon plain | 396 |
|
| RePneu To | MI | Rivet Installation Tools & Accessories | Plain | M6 | nose assembly m6 stud | 1 |
| |
| RePneu To | MI | Rivet Installation Tools & Accessories | Plain | M8 | m8 stud nose assembly | 1 |
| |
| RePneu To | MI | F436 Round Structural Washer | Steel | Plain | 1 1/4 x 2 1/2 | 1 1/4 x2 1/2 f436 structural flat washers med. carbon plain | 82 |
|
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms28774-221 retainer | 20 |
| |||
| Century | FL | Hex Jack Screw | Steel | Zinc/Black | M3-0.5 x 30.31 | m3-0.5 x 30.31 slotted jack screw 4037 stl hrc 33-39 0.008 zinc black trivalent rev a | 7900 |
|
| Century | FL | berg electric 69307-004lf | 10 |
| ||||
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/8 | phil flat 100 deg m/s ss 18-8 | 295 |
|
| Global | CA | 9743-a-0632-0 amatom | 700 |
| ||||
| Global | CA | Electrical Lugs & Terminals | 230 | terminal block 600 v | 16 |
| ||
| Global | CA | Grommets & Eyelets | Copper | Plain | M418 | r eyelet 0.060 odx0.093 lufx0.115 fl od | 6,145 |
|
| Global | CA | Electrical Lugs & Terminals | 1587-2 | threaded base turret terminal 0.187 odx0.548 lx0.145 id | 49 |
| ||
| Global | CA | Finished Hex Nut | Steel | Plain | 1 1/8-7 | hex nut | 24 |
|
| Global | CA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | socket shoulder screw | 170 |
| |
| Global | CA | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/4-20 x 3/4 | phil pan m/s ext sem 18-8 s passivate | 46 |
|
| Global | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 801402 jergens l-handled ball lock pin ss 3/16x1 | 1 |
| ||
| Global | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Plain | p-4006-1420 unistrut channel spring nut | 22 |
| |
| Olander | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-18 x 1 1/4 hx hd sst rohs | 1 |
| |
| Olander | CA | Flat Head Socket Cap Screw | Steel | Cadmium/Yellow | 1/4-20 x 5/8 flat soc alloy cadii | 100 |
| |
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2-56 x 1/4 phil flat ms sst black | 100 |
| |
| Olander | CA | Shoulder Washer (Screw Insulator) | Steel | Plain | 4 | 4 epoxy glass shoulder wash () () | 200 |
|
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 12-24 x 1 slot fill sst rohs | 5 |
| |
| RePneu To | MI | Pull-Out Dowel Pin (Threaded Pin) | Grade 8 | Plain | 1/4 x 3/4 | 1/4 x3/4 dowel pins alloy pull-out | 10 |
|
| GLF | OH | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 1/4 | 5/16-18 x 2-1/4 carriage bolt 18-8 s/s | 79 |
|
| GLF | OH | Carriage Bolt | Grade A | Zinc/Clear | 5/16-18 x 2 3/4 | 5/16-18 x 2-3/4 carriage bolt a307 stl zc | 371 |
|
| GLF | OH | Square Head Bolt | Grade A | Plain | 5/16-18 x 1 | 5/16-18 x 1 sq hd bolt a307 stl pln | 1100 |
|
| GLF | OH | Carriage Bolt | Grade 5 | Zinc/Clear | 5/16-18 x 3/4 | 5/16-18 x 3/4 carriage bolt gr 5 stl zc | 4012 |
|
| GLF | OH | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | 5/8-11 x 1 1/2 | 5/8-11 x 1-1/2 hvy hex hd bolt a325 stl hdg | 226 |
| |
| GLF | OH | Plow Bolt, Scraper Blade Bolt | Grade 8 | Plain | 5/8-11 x 1 3/4 | 5/8-11 x 1-3/4 plow bolt gr 8 stl pln | 92 |
|
| GLF | OH | Carriage Bolt | Grade A | Plain | 5/8-11 x 5 1/2 | 5/8-11 x 5-1/2 carriage bolt a307 stl pln | 7 |
|
| GLF | OH | Carriage Bolt | Grade A | Plain | 5/8-11 x 6 | 5/8-11 x 6 carriage bolt a307 stl pln | 20 |
|
| GLF | OH | Carriage Bolt | Grade A | Zinc/Clear | 5/16-18 x 3 | 5/16-18 x 3 carriage bolt a307 stl zc | 200 |
|
| GLF | OH | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 7/16-20 x 1 1/4 | 7/16-20 x 1-1/4 12-pt flange bolt gr 8 stl pln | 102 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Plain | M10-1.50 x 50 | m10-1.5 x 50 hhcs cl 8.8 stl pln din 933 | 120 |
|
| GLF | OH | Wheel Stud (Screw-in & Press-in) | Grade 8 | Plain | 7/16-20 x 1 | 7/16-20 x 1 flywheel bolt gr 8 stl pln | 3667 |
|
| GLF | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 x 60 | m12-1.75 x 60 hhcs 18-8 s/s din 933 | 70 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 80 | m16-2 x 80 hhcs cl 8.8 stl zc din 933 | 8 |
|
| GLF | OH | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M8-1.25 x 20 | m8-1.25 x 20 hex flange bolt cl 10.9 stl zc b jis 1189 | 3 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 160 | m12-1.75 x 160 hhcs cl 8.8 stl zc din 933 | 13 |
|
| GLF | OH | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M8-1.25 x 35 | m8-1.25 x 35 hex flange bolt cl 10.9 stl zc | 129 |
|
| GLF | OH | Cable Clamps & Ties | Nylon (Polyamide) | 0.14 x 6 | 0.14 x 6 push mount nyl cable tie 40 lbs nat bag of 100 | 181 |
| |
| GLF | OH | Electrical Lugs & Terminals | Nylon (Polyamide) | 16-14 | 16-14 ga x 10 stud nyl insulated ring terminal blue | 179 |
| |
| GLF | OH | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Steel | Zinc/Clear | M6 | m6 #1 shank clinch nut stl zc pem s-m6-1zi | 831 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Zinc/Clear | 5/8-11 | 5/8-11 hex nuts a194/sa194 2h heavy coarse zinc cr+3 | 100 |
|
| RePn eu To | MI | Shaft Collars, & Adjusting Rings | Plain | 2 | 2 double split collar | 2 |
| |
| NAPPCO | TX | Wedge Stud Anchor | Steel | Zinc/Clear | 3/8-16 x 2 1/4 | wedge anchor zp carbonsteel 3/8-16x2-1/4 | 29 |
|
| NAPPCO | TX | Socket Head Cap Screw | Class 12.9 | Plain | M5-0.80 x 20 | soc c/s 12.9 steel m5-0.8x20 din 912 | 1482 |
|
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 | 5/16-18 x 2 flat 82 degree countersink head hex socket cap screw asme b18.3 18.8 stainless steel | head hex socket cap screw asme b18.3 18.8 stainless steel | head hex socket cap screw asme b18.3 18.8 stainless steel | 100 |
| |
| NutsBolts | NE | Socket Head Cap Screw | Steel | Plain | 5/8-11 x 2 1/4 | 5/8-11 x 2 1/4 shcs | 51 |
|
| NutsBolts | NE | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 7 x 3/32 x 5/8 11 | 7 x 3/32 x 5/8-11 a24r cutoff wheel |
| ||
| NutsBolts | NE | Socket Head Cap Screw | Steel | Plain | 5/8-18 x 2 1/4 | 5/8-18 x 2 1/4 shcs | 67 |
|
| ASFCORP | MI | Button Head Socket Cap Screw | Class 10.9 | Black Oxide | M10-1.50 x 50 | m10-1.5 x 50 butt hd soc cap cl 10.9 iso 7380-1 blk ox pkg | 78 |
|
| Bossard | AZ | Socket Head Cap Screw | ASTM A574 | Plain | screw m2.5 x 16mm soc hd cap alloy | 3000 |
| |
| Bossard | AZ | striker | 51825 |
| ||||
| Kanebridge | IL | Internal Type HO Retaining Ring | Steel | Plain | 5/16 | ms16625-1031 5/16 internal retaining ring cadmium yellow retaining rings | 10000 |
|
| Kanebridge | IL | Flat Washer | Aluminum | Plain | 3/4 | 3/4 flat washer aluminum washers | 200 |
|
| Kanebridge | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #10-12 x 5/8 | #10-12x5/8 phillips truss full thread type-a 18-8 stain stl bl ox self tapping/sheet metal | 30000 |
|
| Kanebridge | IL | Deck Screw | Steel | Zinc/Clear | #10-24 x 1 5/8 | #10x1 5/8 sq flat nib deck type-17 partial thread zc nc bk 1000hr deck screws | 30000 |
|
| CIF | IL | Collar Stud | Class 10.9 | Phosphate | M6 x 1.0 x 72.5/72.1 | m6 x 1.0 x 72.5/72.1 collar stud grade 10.9 phos coated | 253 |
|
| CIF | IL | Machine Bushings | Steel | Plain | 1/2 x .065 | 9.52 x 11.09 x 40.13 bushing steel tube plain per ebs a-10 from 1/2 od x .065 wall a513-t5 tube | 8000 |
|
| CIF | IL | Blind Rivet | Copper | Plain | 3/16 x .700 | 3/16 x .700 blind rivet stainless steel riv0.0875x.700188ss | 80000 |
|
| CIF | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 16 | m4-0.7 x 16 button head socket cap screw 18/8ss | 3000 |
|
| Optimas | IL | Internal Type HO Retaining Ring | Steel | Phosphate | 9/16 x .035 | 9/16 x .035 thk internal retaining ring spring steel zinc phos stacked(p) | 11808 |
|
| SWACO | OH | Thrust Washer | Silicon Bronze | Plain | tt-706 bronze thrust washer | 283 |
| |
| SWACO | OH | Wood Screw | Brass | Plain | #9 x 7/8 | #9x7/8 phillips flat wood screw brass | 400 |
|
| SWACO | OH | Sems Machine Screw | Steel | Zinc/Clear | #8-32 x 1/2 | #8-32x1/2 ph pan sems int st zp | 5739 |
|
| SWACO | OH | Self-Clinching Standoff | Plain | sos-440-18 pem standoff | 175 |
| ||
| AIH | AZ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/4 | 4-40 x 1/4 soc set-cone pt s/s | 850 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 7/16-20 x 4 | 7/16-20 x 4 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| NBS | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8 x 2 1/4 | 5/8x2-1/4 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| Field Fas | IL | Class 8.8 | huck pin (c50lr-br44-9) ( 8.87/9.50 ) mto | 350 |
| |||
| OneMonroe | MN | Nails | 1 1/2 | 1 1/2 angled da collated nail 15ga 4000 per box | 8 |
| ||
| OneMonroe | MN | Round Female/Female Standoff | Plain | 1/4 | 1/4 round f-f standoff | 150 |
| |
| OneMonroe | MN | Hex Head Cap Screw | ASTM A320 L7, L7M | Plain | 3/4-16 x 2 1/2 | 3/4-16 x 2 1/2 a320 l7 hv hx cap scs (-30f).063 (2) wire/hd | 2 |
|
| OneMonroe | MN | Socket Head Cap Screw | Nylon (Polyamide) | Plain | #6-32 x 5/16 | 6-32 x 5/16 soc cs nyl nat | 750 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | M160 | caster swivel-plate wheel size 125 mm x 32 mm wheel mat grey rubber on steel non-markingl bearing cone ball w/threadguard load ht 160 mm top plate 95 mm x 70 mm bolt holt ptrn 52/44.45 mm x 76/72 mm load cap 220 lbs temp rt-4 to +185 f | 7 |
| |
| OneMonroe | MN | Handles | non-locking paddle handle | 2 |
| |||
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 3/4 | 3/4 small cup for tapered roller bearing | 1 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Plain | 7/8 x 1 1/2 | 7/8 x 1 1/2 gr5 hhc | 6 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/8 | 4-40 x 1/8 ph fill hd m/s 18-8ss | 80 |
|
| OneMonroe | MN | L-Wrenches, Allen Wrenches & Torx Wrenches | 7/32 | 7/32 hex key sa | 25 |
| ||
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 3/4 | sds plus 3/4 hollow bit-14 1/2 overall length-9 3/4 usable length | 1 |
| |
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 193 |
| ||
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8-15 x 1 1/2 | #8-15 x 1-1/2 phillips/slotted combo pan head sheet metal screw type-a zinc | 81 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | tfhs-832-6 stud ss thin head #8-32 x .375 | 101 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 35 | m8-1.25 x 35 low soc cs ft a2ss din 7984-28442844 | 90 |
|
| OneMonroe | MN | Handles | 2 | 2 point paddle handle lock | 2 |
| ||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 | 10-32 x 1 phillips ss | 10000 |
|
| OneMonroe | MN | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 5/16-24 x 5/16 | 5/16-24 x 5/16 black oxide alloy steel full dog point socket set screw | 200 |
|
| OneMonroe | MN | Hex Male/Female Standoff | Plain | 3/8 | 3/8 hex m-f standoff | 5 |
| |
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45 x 12 | m2.5-0.45 x 12mm a2 s/s phillips pan head macheesecrew din 7985 | 2100 |
|
| MWRAF | CT | raf electronics part 2347-1032-ss 1/2 hex x 5-1/2 length | 540 |
| ||||
| Alma Bolt | MI | Heavy Hex Nut | Grade 7 | Plain | 1 1/4-8 | 1 1/4-8 astm-194 grade 7 heavy hex nut | 30 |
|
| Alma Bolt | MI | Heavy Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/8-7 | 1 1/8-7 st. st. heavy hex nut (b8) | 29 |
|
| Alma Bolt | MI | Machine Screw | Plain | #6-32 x 7/8 | #6-32 x 7/8 pan phillips machine screw | 12397 |
| |
| Alma Bolt | MI | Lock Nut, Nylon Insert | Plain | 1-8 | 1-8 heavy (nu series) nylon insert lock nut | 240 |
| |
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 2 1/2 | 14 x 2-1/2 square socket pan type-ab 18-8 full thread 100ksi | 7650 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 4.00 | 5/16-18 x 4.00 hex cap screw grade 5 zinc | 1311 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M16-2.00 x 50 | m16x2.0 x 50 asme b18.2.3.9m heavy hex flange screw cl 10.9 magni 565 (p) | 39 |
|
| Optimas | IL | Clevis Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12.7 | 8-12mm dia pin clip 301 ss 12.7mm wd x 34mm lg x 26mm hgt w/4.5mm mnt hole | 99 |
|
| Empower H | IL | Connection & Repair Links (Cold Shuts, Connecting Links, etc.) | Steel | Zinc/Clear | 73 | 7370zp-0012zinc plated steel pear shaped quick linksize (wire diameter) 1/2 12mmoverall length 5-11/16 opening size 15/16 working load limit (lbs) 1 940 | 100 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex machine bolt class 8.8 plain | 4 |
| |
| Coburn Myers Fastening Systems | PA | Hex Machine Bolt | 316, 317, A4 Stainless | Plain | hex machine bolt a4-70 stainless plain | 150 |
| |
| Coburn Myers Fastening Systems | PA | Socket Head Cap Screw | ASTM A574 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | socket head cap screw alloy steel a574 xylan blue 1424 coated | 110 |
| |
| BEACON | IL | Sems Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32 x 1/2 phillips pan head machine screw sems external lockwasher steel trivalent zinc & 4hr bake rohs compliant | 201000 |
|
| Hewes | NY | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 1 | 1/4-20x 1 hhc gr5 zinc plate with patch | 8090 |
|
| Komar | IL | Hex Head Cap Screw | Grade 8 | Zinc/Black | 5/16-18 x 2 | 5/16-18 x 2 hex head cap screw grade 8 zinc black trivalent |
| |
| FasSpcMfg | FL | Hex Machine Bolt | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-18 x 2 | 5/16-18 x 2 hex bolt carpenter 20 | 2 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 spec soc cap 2a fit 18-8 stainless | 27 |
|
| FasSpcMfg | FL | Sockets | 400 Stainless (405, 410,416,420,430 etc.) | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 socket set cup point 416 stainless rc 26-32 | 3 |
| |
| FasSpcMfg | FL | Set Screw (Square Head) | 316, 317, A4 Stainless | Plain | 5/8-11 x 1 1/2 | 5/8-11 x 1-1/2 square head set cup point 317l stainless | 2 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | #10-24 x 3/4 | 10-24 x 3/4 socket set cup point 316 stainless | 8 |
| |
| FasSpcMfg | FL | Sockets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/4-20 x 3/8 | 1/4-20 x 3/8 socket set knurled point hastelloy c 276 | 5 |
|
| OneMonroe | MA | Machine Screw | Brass | Plain | #6-32 x 1/2 | 6-32 x 1/2 phillips flat m/s brass | 120 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 1/2 | 5/16-18 x 2 1/2 phillips pan m/s stainless | 25 |
|
| OneMonroe | MA | Button Head Socket Cap Screw | Steel | Plain | M2-0.4-0.40 x 10 | m2-0.4 x 10m button soc cap screw | 300 |
|
| OneMonroe | MA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 | 5/16-18 18-8 stainless steel hex jam nut | 852 |
|
| OneMonroe | MA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25-1.25 x 12 | m8-1.25 x 12m socket cap screw stainless | 75 |
|
| Raw Produ | NJ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 5/16 | dowel pins 304 ss 1/8 x 5/16 | 3254 |
|
| Raw Produ | NJ | Dowel Pin | 316, 317, A4 Stainless | Plain | 3/32 x 3/8 | dowel pins 316 ss 3/32 x 3/8 | 30 |
|
| Raw Produ | NJ | Cap Nut (Acorn Nut) | Steel | Nickel Plated | 5/8-11 | cap nuts nickel-5/8-11 | 25 |
|
| Fastenerc | OH | Semi-Tubular Rivet | Aluminum | Plain | 3/32 x 1/4 | 3/32 x 1/4 aluminum flat countersink semi-tubular rivet plain | 3405 |
|
| Raw Produ | NJ | Machine Screw | 316, 317, A4 Stainless | Plain | #4-40 x 5/8 | phillips pan head ms 316 ss #4-40 x 5/8 | 4900 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #3-48 x 1 | phillips flat head ms 304 ss #3-48 x 1 | 328 |
|
| Raw Produ | NJ | Coupling Nut | Steel | Galvanized | 1/4-20 x 7/16 | coupling nuts hdg 1/4-20 | 1694 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 1 1/4-7 x 3 1/2 | hex cap screws 316 ss 1-1/4-7 x 3-1/2 ft | 2 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/4 | slotted hex washer head sms 304 ss #14 x 1-1/4 | 8745 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 x 25 | metric phillips pan head ms a2 ss m8 x 25m | 1052 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 4 | flat head socket cap screws 304 ss 5/8-11 x 4 | 40 |
|
| Raw Produ | NJ | SAE Flat Washer | Grade 8 | Plain | 7/8 | flat washers sae grade 8 plain 7/8 | 1256 |
|
| Fastenerc | OH | Machine Screw | Steel | Zinc/Yellow | #10-24 x 3/8 | 10-24 x 3/8 steel pan phill mach screw znc/yel | 9370 |
|
| AEROSPCE | MN | Self-Clinching Standoff | Steel | Plain | M6 | bso-m4-6zi 6mm long pem blind threaded standoff | 1592 |
|
| AEROSPCE | MN | Rivet Installation Tools & Accessories | Aluminum | Plain | tp4-3mm-8 pop rivet pilot pin | 78 |
| |
| F. Solutions | OH | Heavy Hex Nut | ASTM A563 Grade DH | Galvanized | 2-4 1/2 | heavy hex nut 2-4.5 a563 dh hdg domestic | 11 |
|
| F. Solutions | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.25 x 40 | hex head cap screw m12-1.25x40 8.8 zinc din 933 | 70 |
|
| F. Solutions | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 9/16-12 x 2 3/4 | hex head cap screw 9/16-12x2-3/4 304 ss | 5 |
|
| F. Solutions | OH | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/4 x 1 3/4 | flat head phillips tapking concrete screw 1/4x1-3/4 blue | 200 |
|
| National | Ont | Sockets | 1/2 x 1 1/4 | 1/2x1-1/4(3/8-16)hx skt shb s | 154 |
| ||
| National | Ont | Button Head Socket Cap Screw | Nylon (Polyamide) | Plain | 1/4-20 x 3/4 | 1/4-20x3/4 butt skt cs s nyl pel ins | 430 |
|
| National | Ont | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 1/4 | 6 x 1/4 pan phil type-b sz | 579 |
|
| National | Ont | T-Head Bolt (T-Slot Bolt, Hammer Head Bolt) | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | M6-1.00 x 20 | m6 x 1.0 x 20 t-bolt w/flat wash mat pt 8.8 steel gmw4205 | 2840 |
|
| National | Ont | USS Flat Washer | Steel | Zinc/Clear | 1/4 | 1/4 uss flat washer steel zinc | 1200 |
|
| Mansco | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10-24 x 3/8 | 10-24 x 3/8 flat u/c phil type-23 metal tc scr triv znc | 10 |
|
| Mansco | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 5/8 | 10-32x1-5/8 button hd soc cap scr 18-8 s/s w/precote 80 per print | 1440 |
|
| Mansco | MI | Threaded Rod | Steel | Plain | 5/8-11 x 36 | 5/8-11x36 threaded rod pln 1/box | 2 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/4-10 x 2 | hex head cap screw 3/4-10 x 2 grade 2 steel zinc plated | | 10 |
|
| Mansco | MI | Fully Threaded Stud (All Thread) | Class 8.8 | Zinc/Clear | M10-1.50 x 50 | M10-1.5x50 full thread stud cl8.8 triv znc | 34036 |
|
| AFI | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 12 | m3x12 button soc hd cs ss iso 7380 () | 740 |
|
| AFI | FL | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 | 4-40 keps nut ss () () | 39027 |
|
| AFI | FL | Self-Clinching Stud | Steel | Zinc/Clear | flush head stud metric steel clear zinc () | 3300 |
| |
| AFI | FL | Self-Clinching Stud | Steel | Plain | flush-head self-clinching stud () | 6510 |
| |
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 5484 |
| |
| Global Fa | TX | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 | m4 steel external/tooth washer a2 | 8000 |
|
| Global Fa | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 4 | m3-0.5x4 ss phil/flat m/s a2 | 85 |
|
| AFI | FL | Quick Access Panel Fasteners (1/4 Turn etc.) | captive screw 8-32 thread flare-in southco 47-12-322-10 | 85 |
| |||
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | 400 Stainless (405, 410,416,420,430 etc.) | Painted | #8-15 x 1/2 | #8-15 x 1/2 self-piercing screws, 1/4 indented hex washer head unslotted, twin lead, full thread, sharp point, 410 stainless dacro 1000hr, head painted grecian green | 29,400 |
|
| F. Solutions | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/2 | slotted round machine screw 8-32x1/2 zinc plated | 1500 |
|
| Arden | WI | Self-Tapping Thread Rolling Screw | Steel | Plain | #14 x 1 1/2 | 14x1 1/2 unslotted hwh plst tl 42 | inquire |
|
| THRDFAST | OK | Hex Tap Bolt (Fully Threaded) | Grade 2 | Plain | 5/8-11 x 3 | gr2 hex t/b b18.2.1 | 9 |
|
| THRDFAST | OK | Machine Screw | Steel | Zinc/Clear | 3/8-16 x 3/4 | slotted flat m/s b18.6.3 | 46 |
|
| THRDFAST | FL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4 | nf-28x1 gr5 hex c/s b18.2.1 | 2 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 7/16-14 x 2 | astm a193 b7m all thread stud | 699 |
|
| Lightning | LA | Wedge Stud Anchor | Steel | Zinc/Clear | 3/8-16 x 3 | wedge anchor (100/bx) | 1862 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 3/8-8 x 14 | astm a193 gr. b16 all thread stud | 387 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | 1/4 x 1/4 (#10-24) | soc sh/b blk | 50 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 3/4-10 x 2 3/4 | astm a193 b7 heavy h/b | 245 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
