FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Steel | Zinc/Yellow | 9000-6y x-ring yellow zinc (std locknut & l/w) | 400 |
| |
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | 006 1/8 x 1/4 x 1/16 | 006 1/8x1/4x1/16 brown viton o-ring 75duro | 200 |
| ||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | fs650488 3/4-16x13/16-16 o-ring swivel connector mjicxfe | 50 |
| |||
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | 316, 317, A4 Stainless | Plain | 1/8 | 1/8dia 316 stainless steel ball bearing | 119 |
|
| Endries | WI | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | txlc187 (or equivalent) 10-32x.788 female clevis trivalent clear zinc | 500 |
| |
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | M74 x 2 | M74x2 viton o-ring | 591 |
| ||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | x 1 3/8 x 1/16 | 026 1-1/4x1-3/8x1/16 viton duro 75 o-ring black | 700 |
| ||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Steel | Black Oxide | 018 | 018v75 black viton o-ring bs018 18.77idx1.78thk | 25 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | vt7501fda (oe) 034 75 duro o-ring 3a sanitary brown | 18560 |
| |||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | #12 | #12 tube.75idx.062w portable o-ring buna n 90 duro | 92 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 3-932 2.34 x .12 | 3-932 2.34idx.12w buna n 90duro black portable o-ring | 126 |
|
| Endries | WI | Machine Bushings | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 61 | 61388-68 bi-metal bushing-ptfe type-per print | 210 |
| |
| Endries | WI | Machine Bushings | abb-125 1-1/4x2-1/8 rgid insulating bushing | 190 |
| |||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | .737 x .103 | o-ring .737 idx.103 wall nitrile 70 duro. | 1550 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | o-ring as-568a-216 epdm per print | 500 |
| |
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 229 | 229b black buna o-ring | 375 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Steel | Black Oxide | x 3 3/8 x 1/16 | 042 3-1/4x3-3/8x1/16 75 duro black viton o-ring | 8 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 009 7/32 x 11/32 x 1/16 90 | 009 7/32x11/32x1/16 90 duro nitrile o-ring black | 500 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | M5.8 x .86 | o-ring 5.8 idx.86 wide orange silicone 70 duro. marco s1001-.86x5.8 | 300 |
| ||
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | ag-20-87-360 7x7 cable assembly with single chank ball swaged end | 1 |
| |||
| Set Screw | IL | O-Rings & Quad Ring Seals (X-Rings) | 11/16 x 13/16 x 1/16 | (.070 +/-.004) o-ring 60 durometer | inquire |
| ||
| Set Screw | IL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | .010 | neoprene 70 1/4 idx3/8 odx1/16 thk o-ring | inquire |
|
| Set Screw | IL | O-Rings & Quad Ring Seals (X-Rings) | #12 | -rings in a 3x3 heat sealed bag | inquire |
| ||
| GLF | OH | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | M16-2.00 x 194 | m16-2 x 194 mod rod end (lid eyebolt) stl zc | 7 |
|
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | M6-1.00 | m6-1.0 grease fitting-stright-ball check-zinc-cr3 | 50 |
|
| GLF | OH | Grease Fittings | Plain | M6-1.60 | m6 x 1.0 grease zerk (45 degree angle) | 50 |
| |
| GLF | OH | Grease Fittings | Steel | Zinc/Clear | M10-1.00 | m10-1 grease fitting 90 degree zinc 15130 50/pk | 50 |
|
| GLF | OH | Grease Fittings | Steel | Zinc/Clear | M10-1.00 | m10-1 grease fitting 45 degree zinc 15067 25/pk | 25 |
|
| GLF | OH | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | M24-3.00 x 100 | m24-3 x 100 mod rod end (lid eyebolt) alloy stl zc | 2 |
|
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | M6 x 1.00 x 14 | 6mm-1.00 x 14mm-straight-grease fitting-ball check plated-ref # 8601-5/pk 11097 | 10 |
|
| GLF | OH | Machine Bushings | Brass | Plain | 1/2 x 3/8 | 1/2 x 3/8 bushing-brass pipe fitting-#28107 | 15 |
|
| GLF | OH | Grease Fittings | Plain | 3/16 | 3/16 straight drive-in grease fitting | 150 |
| |
| GLF | OH | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | M27-3.00 x 212 | m27-3 x 212 mod rod end (lid eyebolt) stl zc | 4 |
|
| GLF | OH | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | M27-3.00 x 270 | m27-3 x 270 mod rod end (lid eyebolt) stl zc | 23 |
|
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball | 155 |
| ||
| GLF | OH | Grease Fittings | Plain | 1/4-28-45 degree angle-taper thread-grease fitting | 25 |
| ||
| GLF | OH | O-Rings & Quad Ring Seals (X-Rings) | Plain | fpm o-ring black | 35 |
| ||
| GLF | OH | Grease Fittings | Steel | Zinc/Clear | 3/8-24 x 0.95 | 3/8-24 x 0.95 45 deg grease fitting stl zc | 40 |
|
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball | 20 |
| ||
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball | 700 |
| ||
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball end | 17 |
| ||
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball | 110 |
| ||
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Plain | ball | 80 |
| ||
| S+S Faste | OH | Machine Bushings | Plain | .31 | 1/4 id miniature insulating bushing black .31 hole | 1100 |
| |
| S+S Faste | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1 3/16 | .080 wire 1-3/16 overall lg hair pin zn 3/32 drill hole 1/4 minimum shaft 3/8 maximum shaft 1/4 inside eye | 196 |
|
| OneMonroe | MN | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | M6 x 6 | end fittingdouble clevis6mmm6 threadzinc plated | 76 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 2 | 25x42x 9mm xl radial b/brg 2 rbr seals | 36 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 1 x 2 | sealed precision ball bearing 1 x2 non flanged | 48 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | M50 | 50mm rubber grey/nylon cup & cone bearing 60mm x 60mm top plate | 50 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 1 | heim sealed ball bearing 1 inch inside diameter 2 inch outside diameter. | 6 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 7/16 | flange bearing 7/16 hex | 20 |
| |
| OneMonroe | NC | Machine Bushings | Plastic | Plain | plastic bushings for p stems | 4 |
| |
| OneMonroe | NC | Machine Bushings | Plastic | Plain | plastic bushings for p stems | 235 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 13/16 | wheel3 x 1 13/16 in gfn 3/8 prc brg | 32 |
| |
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 2 piece shaft collar 18-8 ss | 25 |
|
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | Plain | tab lock collar for c120lb-r12-16g | 6000 |
| ||
| S+S Faste | OH | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 3/8-24 | 3/8-24 drop forged yoke end | 1 |
| |
| S+S Faste | OH | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | 1/4-28 | 1/4-28 drop forged yoke end zinc | 2 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | 316, 317, A4 Stainless | Plain | brg20mm borejilson insertstnls balls acetal races ss316 balls nylon cage (spherical od) | 2 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | bearing | 418 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | bearing | 690 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | bearing | 175 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | bearing | 350 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 4 | 4 swivel prec ball bearing | 4 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Nickel Plated | M100 | pillow block for 100mm spherical od bearing nickel plated with grease groove | 14 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | pillow block | 210 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | M1.2 | o-ring metric 1.2mm cs x 6.0 mm id 70a silicone w/fda certs | 18340 |
| |
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 30 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 340 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 15 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 211 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 4500 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 70 |
| ||
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 9/16 | 9/16 2 piece shaft collar 18-8 ss | 25 |
|
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1/2 2 piece shaft set collar 18-8 ss | 19 |
|
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | Plain | 7/16 | 7/16 2 piece set collar balock oxide | 75 |
| |
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 | 3/8 2 piece shaft set collar 18-8 ss | 40 |
|
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 | 1/4 2 piece shaft set collar 18-8 ss | 32 |
|
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | Black Oxide | 1 3/4 | 1-3/4 2 piece set collar black oxide | 2 |
| |
| S+S Faste | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 | 1 2 piece set collar 18-8 ss | 1 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
