FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MESAFAST | CA | Weld Nut | Steel | Plain | 1/2-13 | 1/2-13 (5/8 wx1-1/2 lng) slab base weld nut center hole w/out projections steel plain | 450.0 |
|
| MESAFAST | CA | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | 6-32x3/4 (1/4 hex) m/f hex standoff 18-8 304 | 500.0 |
|
| MESAFAST | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6-20 x 1 | #6-20x1 phil flat tapping type-ab steel zinc | 900.0 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/4-20 x 2 | 1/4-20x2 hwh self-drilling #4 point itw tek select climaseal | 800.0 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/4-20 x 1 1/8 | 1/4-20x1-1/8 hwh self-drilling #4 point itw tek select climaseal | 1,900.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Plain | 1/4-20 x 3/4 | 1/4-20x3/4 hex cap screw gr2 steel plain | 200.0 |
|
| MESAFAST | CA | External Type C Retaining Ring (C-Clip) | Steel | Phosphate | .625 | .625 od inverted external retaining ring steel phos | 54.0 |
|
| MESAFAST | CA | Machine Screw | Steel | Zinc/Clear | #8-32 x 7/8 | 8-32x7/8 phil flat machine screw steel zinc | 380.0 |
|
| THRDFAST | AL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 10 x 1 | hex tek screw (no washer head) unslotted | 238,080 |
|
| THRDFAST | AL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 10 x 3/4 | hex tek screw (no washer head) unslotted | 1,989,720 |
|
| Aspen | PA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-9/16 ID x 3 1/4 OD x 9/64 THK | 1-9/16 id x 3-1/4 od x 9/64 thk flat washers, stainless steel | 90 |
|
| Endries | WI | Metal Drill Bits | #43 | #43 h.s. jobber drill | 24 |
| ||
| Endries | WI | Service & Repair Kits | kit vertical pole subassy zaxby s | 34 |
| |||
| Endries | WI | Service & Repair Kits | kit-bb11413zn3k | 200 |
| |||
| Aspen | PA | External Type C Retaining Ring (C-Clip) | Steel | Plain | M16 | m16 din 7993a, metric, external snap rings, spring steel | 1000 |
|
| SunPack | FL | Gaskets | 42 | # 1/16 garlock 3000 full face gasket | 20 |
| ||
| Endries | WI | Service & Repair Kits | ed400/700 hardware kit push arm | 248 |
| |||
| Endries | WI | Steel | 3/16 | 3/16 pin tail tube for 255 2580 | 1 |
| ||
| Mansco | MI | Socket Head Flange Screw w/ ribs | Steel | Plain | M6 x 20mm | m6-1.0 x 20mm flange socket hd cap screw with locking serrations | 2000 |
|
| SunPack | FL | Gaskets | 24 | # 1/8 garlock-gylon 3510 off white full face gasket | 2 |
| ||
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO6116-12 | 1500 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO6143-8 | 5119 |
| |
| MFS | KS | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | Captive Fastener CFSOS6143-10 | 8960 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO6143-14 | 4330 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO8194-8 | 1000 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO8194-10 | 3427 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO8194-30 | 1435 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO8143-16 | 1118 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | Captive Fastener CFSO8169-10 | 1250 |
| |
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/4-20 x 2 3/4 | 1/4-20x2-3/4 hex cap screw gr2 steel zinc | 25.0 |
|
| Endries | WI | Copper | 21434 copper distributor fitting | 147 |
| |||
| Endries | WI | c00498471-s 4-14 conductor range neutral bar assembly | 1000 |
| ||||
| SunPack | FL | Gaskets | 24 | # 1/16 garlock ifg-5500 full face gasket | 11 |
| ||
| SunPack | FL | Gaskets | 4 | # 1/16 garlock ifg-5500 full face gasket | 85 |
| ||
| SunPack | FL | Gaskets | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5 | # 1/8 teflon ring gasket | 1 |
| |
| SunPack | FL | Gaskets | 2 1/2 | # 1/16 garlock-gylon 3510 off white ring gasket | 23 |
| ||
| SunPack | FL | Flat Washer | Steel | Zinc/Clear | M12 | flat din 125 | 380 |
|
| SunPack | FL | Gaskets | 3 | # 1/16 garlock 3400 ring gasket | 5 |
| ||
| ISSCO | MO | Electronic Components | Rubber, Buna-N, Neoprene etc. | Plain | 3/16 x 7/16 x 1/4 | grommet rubber black 3/16 id x 7/16 od x 1/4 thk 5/16 groove dia X 1/8 groove width | 2150 |
|
| Cascade | OR | Fender Washer | Steel | Zinc/Clear | 1/4 x 1 | 40000 |
| |
| Spencer | OH | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Phosphate | 1/4-20 x 4 | 6-lobe flat hd | 71980 |
|
| Spencer | OH | Flat Washer | Steel | Zinc/Clear | 1.125 x .283 x .062 | 236560 |
| |
| Spencer | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 5 3/4 | 9600 |
| |
| Spencer | OH | Lock Bolt with Collar (HuckBolt etc.) | NA | Huck (HuckBolt, Hucktainer etc.) Collars | 6840 |
| ||
| SIS | AZ | Steel | foam canister rancho card | 909 |
| |||
| SIS | AZ | shield dual accessor throgh/black nylon | 1550 |
| ||||
| General F | MI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 8-18 x 1 | 8-18 X 1 PH RND WSH HD HI-LO ZN CLR | 150586 |
|
| JFI | CA | Thumb Screw (Shoulder) | Steel | Zinc/Clear | 8-32 x 1 | 8-32 x 1 shouldered thumb screw steel zinc | 590 |
|
| Alpha | TX | F436 Round Structural Washer | Steel | Zinc/Clear | 1 5/8 | 1 5/8 f436 structural flat washer zinc plated | 12890 |
|
| Alpha | TX | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 1 | 1 RIGID CONDUIT STRAPS ZINC PLATED | 4052 |
|
| Alpha | TX | Headed Weld Stud, Shear Connector | Steel | Plain | 3/4 x 8 3/16 | 3/4 x 8 3/16 concrete shear connector%250a100 per box | 2339 |
|
| GUIDON | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | SLOTTED TRUSS | 500 |
|
| GUIDON | TX | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Steel | Zinc/Clear | #10-32 x 7/16 | unslotted hex washer head | 2,830 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | unslotted indented hex washer head | 5,000 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 2 1/2 | TRUSS PHILLIPS | 1,070 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #8-32 x 2 | TRUSS COMBO | 3,000 |
|
| GUIDON | TX | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/16 | TRUSS PHILLIPS | 5,000 |
|
| GUIDON | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 5/16 | TRUSS PHILLIPS | 3,800 |
|
| GUIDON | TX | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/8 | TRUSS PHILLIPS | 5,000 |
|
| GUIDON | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | TRUSS PHILLIPS | 1,000 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/4 | TRUSS PHILLIPS | 8,000 |
|
| GUIDON | TX | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 3/4 | TRUSS PHILLIPS | 3,500 |
|
| GUIDON | NJ | Machine Screw | Steel | Plain | #10-24 x 1/2 | TRUSS PHILLIPS | 6,694 |
|
| GUIDON | NJ | Machine Screw | Steel | Plain | #10-24 x 3/4 | TRUSS PHILLIPS | 3,800 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #10-24 x 5/8 | TRUSS PHILLIPS | 1,100 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #10-24 x 1 1/2 | TRUSS PHILLIPS | 1,880 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/4 | TRUSS PHILLIPS | 800 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | #10-32 x 3/8 | TRUSS PHILLIPS | 2,000 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | TRUSS PHILLIPS | 740 |
|
| GUIDON | NJ | Machine Screw | Steel | Painted | #10-32 x 3/8 | TRUSS PHILLIPS HEADS PAINTED WHITE | 1,000 |
|
| GUIDON | NJ | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | TRUSS PHILLIPS | 2,000 |
|
| JFI | CA | Panel Nut | Brass | Nickel Plated | 1/4-36 | 5/16 A/F X 1/16 TH | 1270 |
|
| JFI | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10-32 x 6 W/1 THREAD | SOCKET CAP | 105 |
|
| JFI | CA | Set Screw (Socket Head) | Steel | Plain | 6-40 x 5/16 | SPECIAL LONG DOG POINT | 200 |
|
| JFI | CA | Nylon (Polyamide) | Plain | Micro Plastics, Inc. 16FWRT008032 | 9000 |
| ||
| JFI | CA | M5 | raf electronic hardware 189-06ss knurled captive screw | 65 |
| |||
| JFI | CA | High Hex Nut | Steel | Zinc/Clear | M5 | 3/8 A/F X 7/32 TH | 408 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 8-32 x 5/16 | round slot | 7000 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 8-32 x 3/8 | oval slot | 3000 |
|
| FACCA | Ont | Sems Machine Screw | Steel | Plain | 4-40 x 3/8 | pan phil, external tooth sems | 3500 |
|
| FACCA | Ont | Machine Screw | Steel | Plain | 6-32 x 1 | round phil | 4000 |
|
| FACCA | Ont | Machine Screw | Steel | Zinc/Clear | #10-32 x 6 | round slot, full thread | 3632 |
|
| FACCA | Ont | Machine Screw | Steel | Zinc/Clear | 10-24 x 3/8 | truss phil | 4440 |
|
| FACCA | Ont | Sems Machine Screw | Steel | Zinc/Clear | M4 x 18mm | pan phil, external tooth sems | 5040 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3.5 x 5mm | pan phil | 2000 |
|
| FACCA | Ont | Split Lock Washer | Steel | Nickel Plated | M5 | 6000 |
| |
| FACCA | Ont | Machine Screw | Steel | Plain | M5 x 16mm | flat phil | 3902 |
|
| FACCA | Ont | Wood Screw | Brass | Plain | #10 x 1/2 | round slot | 2000 |
|
| FACCA | Ont | Self-Tapping Sheet Metal Screw (types a,b,ab) | Brass | Plain | #4 x 1/4 | round slot t/s | 4000 |
|
| FACCA | Ont | Machine Screw | Brass | Plain | #10-32 x 1 1/4 | round slot | 1900 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2-56 x 7/16 | philips drive, fillister-cheese head | 4000 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 1/4 | hwh (hex washer head) | 9955 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 1/2 | hex head | 4500 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 1 1/4 | round slot | 3000 |
|
| FACCA | Ont | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5-40 x 1/4 | hex head, external tooth sems | 20000 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-32 x 7/16 | flat slot | 7000 |
|
| FACCA | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-32 x 5/8 | oval slot | 5000 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
