FCH Member Advertisement
FCH News
Machine Screws, ASTM F1941-10 Fe/Zn-Ni
Machine Screws are uniformly threaded screws which are designed to be screwed into pre-drilled, pre-threaded holes, or in conjunction with a nut, usually with a diameter less than 1/4inch. Larger diameter machine screws with a hex head are usually referred to as machine bolts.
28 results, (click on any line for more information)
| Search Results Sponsored by ISSCO, Inc., your source for Machine Screws. For more results, visit isscoinc.com | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Buy Machine Screws from one of our FCH Network Members | ||||||||
| Irwin Ind | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 1/2 | 1/4-20 x 1/2 hex unslotted washer head machine screw zinc nickel with black chromate 300 hour ss b18.6.3 | 193800 |
|
| National | Ont | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M5-0.80 x 10 | m5 x 0.8 x 10 truss phillips ms st trivalent znni black with black sealant | 114275 |
|
| National | Ont | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M5-0.80 x 8 | m5 x 0.8 x 8 pan phillips washer hd ms st trivalent znni black w black seal | 54275 |
|
| National | Ont | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | ASTM F1941-10 Fe/Zn-Ni | M6 x 13 | m6 x 13 truss phillips slot steel 8.8 gmw4205 patched gm6189p | 1975 |
|
| National | Ont | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | ASTM F1941-10 Fe/Zn-Ni | M6 x 13 | m6 x 13 truss phillips slot steel 8.8 gmw4205 patch per gm6189p | 168338 |
|
| National | Ont | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | ASTM F1941-10 Fe/Zn-Ni | M2.2-0.80 x 6 | m2.2 x 0.8x6 ts blunt pan phil st case hard gmw4205 | 90145 |
|
| National | Ont | Machine Screw | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | mKa40-1.79 x 12 | k40 x 1.79 x 12 pan wash torx 8.8 steel zinc nickel | 517691 |
|
| Mansco | MI | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | #6-19 x 5/16 | 6-19x5/16 flat undercut 6-lobe hi-lo plast tf scr blk gmw4205 | 49900 |
|
| Exim | S'pore | Machine Screw | Class 4.8 | ASTM F1941-10 Fe/Zn-Ni | M90 | screw flat head 90 pozidrivsteel 4.8 black zinc-nickelm2 x 5 mm din 965 | 1000 |
|
| Exim | S'pore | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | 613 | screw hex head torx recess t6steel zinc-nickelm2.5 x 0.45p 5h6h x 13 mm b18.6.3 | 3990 |
|
| Exim | S'pore | Machine Screw | Class 5.8 | ASTM F1941-10 Fe/Zn-Ni | screw long adjustingcarbon steel class 5.8 zinc-nickelm2.5 x 6.2 mm [152-209 hbs] | 4930 |
| |
| Exim | S'pore | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M3.5 x 9 | screw pan head plus minus recesssteel 1018 zinc-nickel m3.5 x 9 mm | 106006 |
|
| Exim | S'pore | Machine Screw | Class 5.8 | ASTM F1941-10 Fe/Zn-Ni | screw pan head plus minus recesssteel class 5.8 zinc nickel m4 x 11.00 mm [thd lg 5.25mm] partial thread | 165 |
| |
| Exim | S'pore | Machine Screw | Class 5.8 | ASTM F1941-10 Fe/Zn-Ni | M5 | screw pan head plus minus recesssteel 5.8 zinc-nickel m4 x 11 mm partial thread length 5 mm | 172189 |
|
| Exim | S'pore | Machine Screw | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | M90 | screw flat head 90 torx plus 10iprsteel 8.8 thru-hardened zinc-nickel m3 x 12 mm iso 7046-2 | 40881 |
|
| Exim | S'pore | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | screw pan head slotted recesssteel 1018 zinc nickelm5 x 16 mm partial thread b18.6.3 | 88218 |
| |
| Exim | S'pore | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M8-1.25 x 648 | screw special headcarbon steel zinc-nickelm8 x 1.25 6h x 48 mm | 4026 |
|
| WDMB | IA | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | #10-32 x 5/8 | machine screw fil st (znni) slotted 10-32x5/8 (W020) (W020) | 5,900 |
|
| WDMB | IA | Machine Screw | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | q/scr- (znni)-m5x8-spc iso 14581-08.8-tx25- (W030) (W030) (W030) | 21,405 |
| |
| WDMB | IA | Machine Screw | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | M8 x 20 | screw machine screw b 8.8 (gmw4700b) sq m8x20 (W040) (W040) | 26,210 |
|
| WDMB | IA | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | 20 x 5/8 | scr-ms-fil-st-(znni)-slt-1/4_20x5/8 | 3,000 |
|
| EFC | MO | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M4.2-1.41 x 10 | m/ 6-lobe lg xrt gmw4205 afi industries inc 11609460 | 6000 |
|
| ACF | CA | Machine Screw | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | M8-1.25 x 16 | M8-1.25x16 6-lobe pan 8.8 m/s zinc nickel black print | 98298 |
|
| General F | MI | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 1 | 1/4-20 x 1 pn phil ms zini blk b18.6.3 | 2500 |
|
| General F | MI | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 1 | 1/4-20 x 1 flt phil ms zini blk w/patch | 1133 |
|
| General F | MI | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | #8-32 x 03/4 | 8-32 x 0.75 pn phil ms zini blk b18.6.3 | 4210 |
|
| IRF | NJ | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M6 x 11.75 | l w/dog t30 torx m/s-hard per print gmw4700 | 66094 |
|
| IRF | NJ | Machine Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | M6 x 11.75 | l w/dog t30 torx m/s-hard per print gmw4700 | 66094 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
