Ground & Polished Shafting, Steel
Ground & Polished Shafting is a round shaft or rod, ground and polished to a specified diameter. The purpose of the shaft is usually to allow a pulley or sprocket or gear to be locked in place on the shaft (by welding, screwing, etc.) so that mechanical power can be transmitted to another mechanical device. However, a ground shaft may also be used as an axle for a wheel or other rotating device.
95 results, (click on any line for more information)
Buy Ground & Polished Shafting from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
GLF | OH | Turned, Ground & Polished Shafting | Steel | Galvanized | 1/4 | 1/4 push nut 1/4 shaftx15/16 od stl hdg () () () | 5000 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Plain | 1/4 | 1/4 shaft dia ext gripping ret.ring stl (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) | 1800 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Phosphate | 7/16 | 7/16 shaft dia ext ret. ring stl blkphos (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) (534-TRUARC RETAINING RINGS) | 50 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 216 1/2in shaft x1-15/16 hair pin cotter trivalent clear zinc | 790 |
| |
Olander | CA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair spring cotter stl zn 1/8-3/16 shaft | 656 |
| |
Olander | CA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair spring cotter stl zn 5/16-3/8 shaft | 552 |
| |
Century | FL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21250 headed roller shaft stl rohs compl (ZINC CLR PER PRINT .1875 X 1.7X.38X.06) (ZINC CLR PER PRINT .1875 X 1.7X.38X.06) | 3794 |
| |
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 213 | 213 hair pin cotter yellow zinc (1/4 shaftx1-3/16) | 2158 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 221 | 221 (oe) hair pin cotter zinc (1/8 shaftx19/32) | 11000 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21-09 | 21-09 hair pin cotter zinc (1-1/8-1-1/2 shaftx5) | 400 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 236 | 236 hair pin cotter zinc (3/16 shaftx3/4) | 668 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 203 | 203 hair pin cotter zinc (1/4 shaftx1-5/8) | 1800 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Plain | six-inch acid brushes tin shaft with natural or nylon bristles | 144 |
| |
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 208 | 208 hair pin cotter zinc (7/8 shaftx3-3/4) | 3475 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | 1/4 shaft external retainig ring blk phos stacked | 8640 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1 x 1 | 1 double split shaft collar blk ox 1/box | 148 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | .375 x 10.392 | .375x10.392 special shaft blk ox & oil | 19230 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 23.813mm dia x 183.5mm oal shaft w/int/ext m10-1.5 threads w/znc flash-print | 5962 |
| |
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 3/8 shaft x-washer retainer znc | 3454 |
| |
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 shaft x-washer retainer znc | 11375 |
| |
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 shaft x-washer retainer znc 25/bag | 1027 |
| |
Century | NY | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | external in ein ring 1/4 shaft steel zinc (rohs) | 333 |
| |
Century | NY | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 3/8-16 x 4.75 dbl end curved shaft steel(see print) zinc/yel rev-a q5b parker parker | 804 |
| |
Century | NY | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21250 headed roller shaft stl rohs compl zinc clr per print .1875 x 1.7x.38x.06 | 3794 |
| |
Liberty | IL | Turned, Ground & Polished Shafting | Steel | Phosphate | c rectangular push on nut for 1/2 shaft phos | 26,000 |
| |
Komar | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/64 x 1 3/16 | 5/64x1 3/16 oa. hairpin cotter-3/8 shaft zinc | 1100 |
|
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Plain | tx-75stpa 3/4 ext push-on shaft ring stl | 4000 |
| |
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .781 | .781 ret ring for shaft sprst phos (sh-78st pa) | 1000 |
|
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .551 | .551 ret ring for shaft sprst phos (sh-55st pa) | 4250 |
|
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Plain | e-ring .219 shaft sprst pln | 1150 |
| |
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | .250 x .602 | push nut .250 shaftx.602 od stl zinc | 50000 |
|
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1000-556-ka shaft zinc emka | 18 |
| |
SJS Prod | CA | Turned, Ground & Polished Shafting | Steel | Plain | pic #msh1-10 ground shafting m3x70mmlg |
| ||
Exim | S'pore | Turned, Ground & Polished Shafting | Steel | Black Oxide | 4.800 x 10.00 x 0.250 | ring shaft high carbon spring steel black oxide4.800 x 10.00 x 0.250 mm | 5000 |
|
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 36 for 8070 pkt door blk 10/bx | 14 |
| |
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 48 for 8090 pkt door blk 10/bx | 11 |
| |
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 72 for 8090 pkt door blk 10/bx | 10 |
| |
Komar | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/64 x 1 3/16 | 5/64x1 3/16 oa. hairpin cotter-3/8 shaft zinc | 1100 |
|
JHP Fasteners | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair pin clip .125-.187 shaft dia mb spring wire plated | 4941 |
| |
Setko Fas | IL | Turned, Ground & Polished Shafting | Steel | Black Oxide | 3/8 | 3/8 split shaft collar steel black oxide | 100 |
|
Setko Fas | IL | Turned, Ground & Polished Shafting | Steel | Black Oxide | 5/16 | 5/16 split shaft collar steel black oxide | 100 |
|
Setko Fas | IL | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1 1/2 | 1 1/2 split shaft collar steel black oxide | 100 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M6 | shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M5 | shafting din 671 steel plain | 7 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M13 | shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M12 | shafting din 671 steel plain | 5 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M15 | shafting din 671 steel plain | 76 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M20 | shafting din 671 steel plain | 115 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M25 | shafting din 671 steel plain | 89 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M40 | shafting din 671 steel plain | 24 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M45 | shafting din 671 steel plain | 1 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M65 | shafting steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M36 | shafting steel plain 36 din 671 | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M7 | shafting steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M28 | m28 shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M20-12l14 | m20-12l14 shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M60 | m60 shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M70 | m70 shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M25 x 1308 | m25x1308 shafting steel plain din 671 | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M46 | m46 shafting al din 671 | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M6 x 895 | m6x895/21 shafting steel plain din 671 | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M50 x 2000 | m50x2000 shafting steel plain din 671 | inquire |
|
WDMB | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 363 | rod shaft brng st (zt) m363 drw (W0R0) (W0R0) | 480 |
|
QCS | OR | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | #211 | #211 hairpin cotter 7/16-3/4 shaft dia zinc western wire | 1192 |
|
Hodell | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/2 | 1/2 pushnut zinc style ps/a for use on nonthreaded shaft | 750 |
|
Hodell | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/2 | 1/2 pushnut zinc style ps/a for use on nonthreaded shaft | 750 |
|
SIS | AZ | Turned, Ground & Polished Shafting | Steel | Phosphate | 13/64 | 13/64 od push nut blk-phos steel for 1/16 shaft diam | 3000 |
|
ACF | CA | Turned, Ground & Polished Shafting | Steel | Phosphate | 3 | 3 external shaft retaining ring phosphate | 70 |
|
ACF | CA | Turned, Ground & Polished Shafting | Steel | Plain | 1/4 | 1/4 external shaft retainer plain | 628 |
|
ACF | CA | Turned, Ground & Polished Shafting | Steel | Phosphate | 43/64 | 43/64 external shaft retaining ring phosphate | 300 |
|
General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | .375 x 4.050 | adjustment guide | 4,019 |
|
General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | M46.68 x 118.5 | M46.68 x 118.5 rod-push inter axle | 220 |
|
Sonfast | PA | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | external shaft type ring #re-21 zinc yellow 1074 carbon steel | 3,000 |
| |
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Plain | 1/8 | 1/8 shaft dia ext ret ring steel black | 2600 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Phosphate | 3/16 | 3/16 shaft dia ext ret ring stl blk phos | 1900 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Phosphate | 5/32 | 5/32 shaft dia ext ret ring stl blk phos | 5000 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Phosphate | 3/8 | 3/8 shaft dia ext ret ring stl blk phos | 900 |
|
NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Plain | 1/4 | 1/4 shaft dia ext e ring steel plain | 1000 |
|
Trifast | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | de shaft ring s437m mech zinc | 29950 |
| |
BoltCraft | NE | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 8 long 1-1/4 1045 cr shaft with hole drilled zinc | 100 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.