FCH Member Advertisement
FCH News
1 1/4 Flat Washers
Flat Washers, or just Plain Washers, are a flat annulus or ring, often of metal, used to spread the load from the head of a screwed fastening to the base material. Flat washers are used to increase the bearing surface of a nut or fastener's head thus spreading the clamping force over a larger area.
> 200 matches, . Showing 200, (click on any line for more information)
| Buy Flat Washers from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Set Screw | IL | Flat Washer | Silicon Bronze | Plain | 1 1/4 x .571 x .075 | 1 1/4 odx.571 idx.075 thick flat | inquire |
|
| American | NY | Flat Washer | Brass | Plain | 1 1/4 x 3/4 x .062 | f/w | 10000 |
|
| SRF | AL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 29/32 x .064 | 1 1/4 od 29/32 id .064 thk s/s | - |
|
| Endries | WI | Flat Washer | Steel | Zinc/Clear | 1/2 x 1 1/4 | wa-141 1-1/4x1/2 reducing washer trivalent clear zinc | 50 |
|
| American | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .120 x 1 1/4 | .640 id washer #18-8 ss (1-1/4 od x .120 thk) (+.011/-.005) [302/304 ss-vibratory deburr] | 207 |
|
| WDMB | IA | Flat Washer | Steel | Zinc/Yellow | 1.380 x 1.625 x .093 | flat st (zy) 1.380x1.625x.093 (W000) (W000) | 1,540 |
|
| TPC | IN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 1 5/8 x .033 | flat 304 | 50000 |
|
| KBS | TN | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 1.625 x .110 | 1.375 x1.625 x.110thk nylon f/w b18.22.1 | 2,350 |
|
| Ababa | CA | Flat Washer | Nylon (Polyamide) | Plain | 1 1/4 x 1 3/4 | 1 1/4 x 1 3/4 f/w nylon b18.22.1 | 210 |
|
| American | NY | Flat Washer | Nylon (Polyamide) | Plain | 1 1/4 x 1 3/4 x 1/16 | flat | 860 |
|
| WDMB | IA | Flat Washer | Steel | Plain | 1 1/4 x 1 3/4 x 3/32 | flat st (pl) 1 1/4x1 3/4x3/32 spc | 126 |
|
| Wurth | IN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1.38 x 1.75 x .06 | 1.38 x 1.75 x .06 flat washer 18-8 s/s | 544 |
|
| Mid-Valley | CA | Flat Washer | Copper | Plain | 1 1/4 x 1 3/4 | flat washer b18.22.1 | inquire |
|
| Liberty | IL | Flat Washer | Steel | Plain | 1 1/4 x 1 3/4 x .030 | flat hardened hardened | 5,000 |
|
| JET FITTING | CA | Flat Washer | Steel | Zinc/Clear | 1 1/4 x 2.000 x .164 | 1-1/4x2.000x.164 flat washer steel zinc b18.22.1 | 108 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain | 1 1/4 x 2 x .024 | flat (air brake) | 1600 |
|
| GLF | OH | Flat Washer | Steel | Plain | 1 1/4 x 2 x 0.085 | 1-1/4x2 x 0.085 flat stl pln b18.22.1 () () () | 300 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 1 1/4 x 2 x 3/32 | thick flat washer | 1,490 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 1 1/4 x 2 x 1/16 | thick flat . flat . | 260 |
|
| Liberty | IL | Flat Washer | Nylon (Polyamide) | Plain | 1 1/4 x 2 x 1/16 | thick flat washer | 2,098 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain | 1 1/4 x 2 x 0.025 | flat flat s | 1,700 |
|
| WDMB | IA | Flat Washer | Steel | Zinc/Yellow | 1.38 x 2.13 x 0.13 | flat st (zy) 1.38x2.13x0.13 (W050) | 614 |
|
| WDMB | IA | Flat Washer | Steel | Plain | 1.40 x 2.18 x .189 | wsh flt st (pl) 1.40x2.18x.189 drw (W000) (W000) (W000) | 42 |
|
| American | NY | Flat Washer | Steel | Plain | 1 1/4 x 2 1/4 x .125 | flat | 30 |
|
| ACCURATE | IL | Flat Washer | Fiber | Plain | 1.375 x 2.25 x .125 | 1.375 idx2.25 odx.125 hard gray | 1470 |
|
| CIF | IL | Flat Washer | Steel | Zinc/Yellow | 1 1/4 x 2 1/4 x 1/4 | 1 1/4x2 1/4x1/4 flat hardened heaby duty zinc yellow (1048) (1048) (1053) () | 1053 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 1 1/4 x 2 1/4 x 10 | 1-1/4 idx2-1/4 odx10 gauge flat flat | 200 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | 1 1/4 x 2.275 | 1-1/4 idx2.275 odx.125 thk flat nylon | 57.0 |
|
| American | NY | Flat Washer | Steel | Plain | 1 1/4 x 2 1/2 | fl | 71 |
|
| American | NY | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 1/2 x .165 | flat s/s | 818 |
|
| WDMB | IA | Flat Washer | Steel | Plain | 1.391 x 2.50 x .078 | flat st (pl) 1.391x2.50x.078 (W000) | 575 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 1.375 x 2.500 x 0 | 1.375 idx2.500 odx0.250 thick flat | 596 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 1.375 x 2.500 x 0 | 1.375 idx2.500 odx0.250 thick flat c1045 rc 38-45 | 700 |
|
| Alma Bolt | MI | Flat Washer | Steel | Plain | 1.38 x 2.50 x .150 | 1.38 idx2.50 odx.150 tk flat (specials only) | 650 |
|
| API | IA | Flat Washer | Steel | Zinc/Clear | 1.391 x 2.5 x 0.194 | flat jds24 | 71 |
|
| Field Fas | IL | Flat Washer | Steel | Plain | 1.38 x 2.50 x .156 | 1.38 id x 2.50 od x .156 thk f/w thru-hard-rc 38-45 | 61 |
|
| Wurth | IN | Flat Washer | Steel | Plain | 1 1/4 x 2.56 x 1/4 | 1-1/4 x 2.56 x 1/4 f/w 1015 stl ch zf coating per 705100300 cps 5035/5039 per print k968 rev n pack 25 per poly bag | 63 |
|
| Delta | TX | Flat Washer | Steel | Plain | 1 1/4 x 2 5/8 | sphericl wshr 1 1/4x2 5/8 odx1/2 thk | 50 |
|
| Jackson | MS | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 3/4 | od flat 18-8 s/s | 47 |
|
| Ababa | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 3/4 | 1 1/4 x 2 3/4 f/w s/s b18.22.1 | 45 |
|
| Ababa | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 3/4 | 1 1/4 x 2 3/4 f/w s/s b18.22.1 | 15 |
|
| TSF | TX | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4-1.312 x 2.75 x .125 | flat washer 18-8 ss 1-1/4 (1.312 ) x 2.75 x .125 | 196 |
|
| B & K FAST | PA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 3/4 | 1 1/4 x 2 3/4 od flat washers stainless 18-8 b18.22.1 | 28 |
|
| B & K FAST | PA | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 x 2 3/4 | 1 1/4 x 2 3/4 od flat washers stainless t316 b18.22.1 | 19 |
|
| QFC | TX | Flat Washer | Steel | Galvanized | 1 1/4 x 2 3/4 x 1/2 | 1 1/4x2-3/4x1/2 heavy flat hdg domestic b18.22.1 | 79 |
|
| QFC | TX | Flat Washer | Steel | Galvanized | 1 1/4 x 2 3/4 x 1/2 | 1 1/4x2-3/4x1/2 heavy flat hdg domestic b18.22.1 | 101 |
|
| ACCURATE | IL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 x 2 3/4 | flat 316 | 24 |
|
| ACCURATE | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 2 3/4 | flat 18-8 ss | 24 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 x 2.75 x 1.31 | 1-1/4 316l ss flat od=2.75xid=1.31xthk=.125 | 49 |
|
| B & K FAST | PA | Flat Washer | Brass | Plain | 1 1/4 x 3 x 1.315 | 1 1/4 x 3 od brass flat washers 1.315 x 2.993 x .164 b18.22.1 | 5 |
|
| THRDFAST | FL | Flat Washer | Steel | Galvanized | 1 1/4 x 3 | spec. dim. f/w 1/4thk hdg b18.22.1 | 21 |
|
| FastWare | Sask | Flat Washer | Steel | Phosphate | 1.375 x 3.000 x 0 | 1.375 idx3.000 odx0.250 thick flat | 888 |
|
| HBBOLT | CA | Flat Washer | Brass | Plain | 1 1/4 x 3 | od flat | 9 |
|
| Hayes | CA | Flat Washer | Steel | Plain | 1.37 x 3.00 x .25 | 1.37 x 3.00 x .25 f/w steel pln | 22 |
|
| Exim | S'pore | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1.370 x 3.239 x 0.635 | washer flat s/s passivated1.370 x 3.239 x 0.635 mm0.054 x 0.127 x 0.025 in. b18.22.1 | 104700 |
|
| WDMB | IA | Flat Washer | Steel | Plain | 1 1/4 x 3.25 x 0.25 | flat st 1 1/4x3.25x0.25 spc (W030) | 257 |
|
| WSB | KY | Flat Washer | Steel | Plain | 1 1/4 x 3.25 x 0.25 | washer flat st 1 1/4x3.25x0.25 b18.22.1 | 257 |
|
| THRDFAST | FL | Flat Washer | Steel | Plain | 1 1/4 x 3 1/2 | spec dim f/w 3/8 thk b18.22.1 | 7 |
|
| Hodell | OH | Flat Washer | Brass | Plain | 1 1/4 x 70 | 1 1/4 spcl brass f/w 70-30 cartridge1.407x2.25x.04 | 50 |
|
| Hodell | OH | Flat Washer | Brass | Plain | 1 1/4 x 70 | 1 1/4 spcl brass f/w 70-30 cartridge 1.407x2.25x.04 | 50 |
|
| Jackson | MS | Flat Washer | Grade 9 | Zinc/Yellow | 1 1/4 | l-9 tension flat 2-1/4 odx1-5/16 idx1/4 thick | 2 |
|
| American | NY | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | flat 316 | 31 |
|
| YANKEE | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 std flat washer stainless steel | 45 |
|
| YANKEE | NH | Flat Washer | Steel | Plain | 1 1/4 | 1-1/4 std flat washer plain | 46 |
|
| YANKEE | NH | Brass | Plain | 1 1/4 | 1-1/4 std flat washer brass | 2 |
| |
| TSF | TX | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | flat washer ss 316 1-1/4 | 5 |
|
| TownCountry | AR | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 flat washer s.s 18-8 | 25 |
|
| QFC | TX | Flat Washer | Steel | Galvanized | 1 1/4 | 1 1/4 hdg cut each 3.8/lb b18.22.1 | 96 |
|
| ACCURATE | IL | Flat Washer | Nylon (Polyamide) | Plain | 1 1/4 | flat | 103 |
|
| R&S Indus | OR | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1 1/4 stainless steel flat washer 316/domestic | 80 |
|
| HBBOLT | CA | Flat Washer | Steel | Plain | 1 1/4 | flat , | 74 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4 | 1-1/4 18-8 ss flat ptfe yellow xylan | 11 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 18-8 ss flat | 1,010 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 316 ss flat | 105 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Passivated | 1 1/4 | 1-1/4 316l ss flat passivated a967 | 23 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4 | 1-1/4 316 ss flat ptfe blue | 8 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1 1/4 316 ss flat domestic | 27 |
|
| Hewes | NY | Flat Washer | Steel | Plain | 1 1/4 | an960-2016 f/w plate1-1/4 nominal size | 2036 |
|
| Hewes | NY | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | f/w 316 s/s stmp 3161-3/8x 3x.136/.192 | 78 |
|
| Hewes | NY | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | flat 18-8 s/s | 110 |
|
| Empire | WA | Flat Washer | Steel | Plain | 1 1/4 | 1 1/4 (each) flat cut washer 4/lb | 3 |
|
| MTP | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 an960c2016-18-8 s.s flat washers 1 1/4 x 2 x .092 | stock |
|
| Wurth Ada | MN | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | washer flat b n s/s 316 1 1/4 | 1,567 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4 | 1-1/4 316 ss flat ptfe yellow | 7 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1 1/4 | 1-1/4 304ss nas1149 flat washer passivated per a967 2.00 od x 1.265 id x .032 thick 2.00 od x 1.265 id x .032 thick | 5 |
|
| Valley Nu | WA | Flat Washer | Brass | Plain | 1 1/4 | flat | 4 |
|
| GLF | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat 18-8 s/s b18.22.1 () () () | 4 |
|
| GLF | OH | Flat Washer | Steel | Plain | 1 1/4 | 1-1/4 flat dti stl pln b18.22.1 () () () | 10 |
|
| CIF | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 flat 18-8 s/s steel plain (6) (6) (6) () | 6 |
|
| THRDFAST | FL | Flat Washer | Grade 9 | Zinc/Yellow | 1 1/4-9 | 1-1/4 l-9 flat z&y b18.22.1 | 4 |
|
| CIF | IL | Flat Washer | Grade 2 | Galvanized | 1 1/4 | 1 1/4 flat grade 2 hdg (170) (170) (110) () | 110 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Passivated | 1 1/4 | 1-1/4 316l ss flat washer passivated a967 | 23 |
|
| THRDFAST | FL | Flat Washer | Aluminum | Plain | 1 1/4 | alum flat b18.22.1 | 1 |
|
| THRDFAST | FL | Flat Washer | Brass | Plain | 1 1/4 | flat b18.22.1 | 3 |
|
| ISSCO | MO | Flat Washer | Steel | Plain | 1 1/4 | thru-hard 1.30 id x 3.0 od x .162 thk | 325 |
|
| ISSCO | MO | Flat Washer | Steel | Plain | 1 1/4 | thru-hard rc38/45 1-5/16 id x 2-1/4 od x .146 thk | 1095 |
|
| Lippin | CA | Flat Washer | Steel | Galvanized | 1 1/4 | 1 1/4 flat washer hdg | 7790 |
|
| Endries | WI | Flat Washer | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1 1/4 | 1-1/4 type 5 pcc-1-2013 410 stainless steel hardened flat with certified material test report | 14 |
|
| Endries | WI | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 316 stainless steel standard flat | 22 |
|
| NutsBolts | NE | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 ss flat washer | 156 |
|
| NutsBolts | NE | Flat Washer | Steel | Plain | 1 1/4 | 1 1/4 pa pin w/1 washer | 600 |
|
| MidStates | MI | Flat Washer | Steel | Plain | 1 1/4 | hammer drive pin w/3/8 | 417 |
|
| MidStates | MI | Flat Washer | Steel | Plain | 1 1/4 x 2 1.32 | 1-1/4x2 f/w 1.32 thk nyl | 65 |
|
| Standard | MA | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 lp flat washer brass b18.22.1 | 378 |
|
| Future Fastener | TX | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer stainless steel | 85 |
|
| Future Fastener | TX | Flat Washer | Steel | Galvanized | 1 1/4 | 1-1/4 flat washer (galv) | 154 |
|
| Jackson | MS | Flat Washer | Grade 8 | Zinc/Yellow | 1 1/4 | bolt size 2.5 od .9375 id .317 thick xtra thick flat | 163 |
|
| OBRIEN | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | commercial flat 2 3/4 od 18-8 s/s | 44 |
|
| Lippin | CA | Flat Washer | Brass | Plain | 1 1/4 | flat washer brass | 580 |
|
| Delta | TX | Flat Washer | Steel | Plain | 1 1/4 | special flat washer cs plain 1 1/4 (STEEL; OD 3 X ID 1 5/16 X THICK .125) | 112 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 316l ss flat od=2.75xid=1.31xthk=.125 od=2.75xid=1.31xthk=.125 | 45 |
|
| QFC | TX | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 brass flat washer b18.22.1 | 18 |
|
| ASFCORP | MI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 flt wshr ss pkg | 41 |
|
| ASFCORP | MI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1 1/4 certificate of conformance required w/ship flt wshr ss | 275 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 316 ss flat domestic | 40 |
|
| Liberty | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | standard flat 18-8 s/s 18-8 s/s | 2 |
|
| Liberty | IL | Flat Washer | Brass | Plain | 1 1/4 | flat | 15 |
|
| Liberty | IL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | standard flat 316 stainless 316 stainless | 22 |
|
| HBBOLT | CA | Flat Washer | Steel | Galvanized | 1 1/4 | flat [] | 124 |
|
| HBBOLT | CA | Flat Washer | Iron | Plain | 1 1/4 | rd. malleable | 44 |
|
| HBBOLT | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | flat [304 ss] | 62 |
|
| IPC | VA | Flat Washer | Steel | Plain | 1 1/4 | 1-1/4 flat narrow t steel type-b | 192 |
|
| IPC | VA | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | 1 1/4 | 1 1/4 black rubber tip buna 75 shore with | 24,000 |
|
| Endries | WI | Flat Washer | Steel | Plain | 1.375x2.062x.092 hardened flat washer plain rockwell c hardness 38-45 | 202 |
| |
| Hayes | CA | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 flat washer brass | 13 |
|
| Hayes | CA | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 flat washer 316ss | 50 |
|
| BAYFASTCO | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 flat washer 316 s/s | 50 |
|
| Fastener | OH | Flat Washer | Brass | Plain | 1 1/4 | flat 1-1/4 brass | 2 |
|
| Fastener | OH | Flat Washer | Steel | Plain | 1 1/4 | flat 1-1/4 type-b narrow | 83 |
|
| Empire | WA | Flat Washer | Steel | Galvanized | 1 1/4 | 1 1/4 flat washr h.d.galv(3.8/ | 1000 |
|
| NAPPCO | TX | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 fw s/s t316 1.312id 2.750od.100thk | 21 |
|
| Delta | TX | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | popular com flat 18-8 sst 1 1/4 ((2 3/4 OD)) | 60 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4 | 18-8 ss flat ptfe xylan | 11 |
|
| SunPack | FL | Flat Washer | 316, 317, A4 Stainless | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4 | 1-1/4 31 6 ss flat washer ptfe blue | 8 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss | 83000 |
|
| Optimas | IL | Flat Washer | Steel | Plain | 1 1/4 | 1-1/4 t/h steel 1.313x2 x .220 per drawing flat washer | 163 |
|
| Lightning | LA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | flat 18-8 ss | 517 |
|
| Brikksen | FL | Flat Washer | Silicon Bronze | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick silicon bronze | 1000 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 304ss-domestic mfg. | 106000 |
|
| Standard | MA | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 standard flat washer 316 stainless steel | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick ss/chrome- | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss 50 per box f-48box | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 316ss | 35000 |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 316ss | 156000 |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick aluminum | inquire |
|
| GLF | OH | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 flat washer 316 s/s | 100 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss 50 per box f-48box | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Plain | 1 1/4 | 7/16 flat washer 1-1/4 od stl | inquire |
|
| Brikksen | FL | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 flat washer brass (1.312 x 3.00 x .156) | inquire |
|
| Brikksen | FL | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 flat washer brass (1.312 x 3.00 x .156) | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Plain | 1 1/4 | 7/16 flat washer 1-1/4 od stl | inquire |
|
| Valley Nu | WA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | flat 18-8 ss | 5 |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Valley Nu | WA | Flat Washer | Iron | Galvanized | 1 1/4 | (5 od) rd mal hdg | 25.2 |
|
| Brikksen | FL | Flat Washer | Steel | Zinc/Yellow | 1 1/4 | 7/16 flat washer 1-1/4 od stl zinc dichromate | inquire |
|
| American | WI | Flat Washer | Steel | Zinc/Clear | 1 1/4 | 1-1/4 type-b reg washer hardened zinc (1.342-1.305 id x 3.03-2.993 od x .174-.148 thk) | 201 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss | 88000 |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Standard | MA | Flat Washer | Steel | Galvanized | 1 1/4 | 1-1/4 standard flat washer galvanized | 43 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss 50 per box f-48box | inquire |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss | 137000 |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick aluminum | 44000 |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Century | NY | Flat Washer | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | flat washer zzfw2.5odx1.375idx.136 1 1/4 type-a narrow flat washser steel w/geomet 321a+vl | 100 |
| |
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 304ss-domestic mfg. | inquire |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Empire | WA | Flat Washer | Steel | Galvanized | 1 1/4 | 1 1/4 flat washr h.d.galv(3.8/ | 40 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick ss/chrome- | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick ss/chrome- | 2000 |
|
| Brikksen | FL | Flat Washer | Steel | Plain | 1 1/4 | 7/16 flat washer 1-1/4 od s/z p43005 | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 316ss | 37000 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 18-8ss 50 per box f-48box | inquire |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick aluminum | 49000 |
|
| Brikksen | FL | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 flat washer brass (1.312 x 3.00 x .156) | 200 |
|
| Hodell | OH | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1-1/4 flat 316 stainless | 467 |
|
| Raw Produ | NJ | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | flat washers 316 ss 1-1/4 | 1585 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 316ss | 55000 |
|
| THRDFAST | AL | Flat Washer | Aluminum | Plain | 1 1/4 | alum flat b18.22.1 | 158 |
|
| Centennia | CO | Flat Washer | Steel | Plain | 1 1/41050 | 1-1/41050 wash 1.360 x 2.25 harden | 1050 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick 304ss-domestic mfg. | inquire |
|
| Century | NY | Flat Washer | Steel | Plain | ust237823 washer .5625 1.375 .125 | 25 |
| |
| Irwin Ind | Ont | Flat Washer | Steel | Zinc/Clear | 1 1/4 | 1 1/4 b.s. special zinc phos to gm6035 b18.22.1 | 116 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .062 thick ss/chrome- | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Plain | 1 1/4 | 7/16 flat washer 1-1/4 od stl | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Zinc/Yellow | 1 1/4 | 7/16 flat washer 1-1/4 od stl zinc dichromate | inquire |
|
| Brikksen | FL | Flat Washer | Brass | Plain | 1 1/4 | 1-1/4 flat washer brass (1.312 x 3.00 x .156) | inquire |
|
| Raw Produ | NJ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | standard flat washers 304 ss 1-1/4 | 50 |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick aluminum | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Plain | 1 1/4 | 7/16 flat washer 1-1/4 od stl | inquire |
|
| Brikksen | FL | Flat Washer | Steel | Zinc/Yellow | 1 1/4 | 7/16 flat washer 1-1/4 od stl zinc dichromate | inquire |
|
| Valley Nu | WA | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/4 | flat 316 ss | 1 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1-1/4 flat washer 2.750 od .125 thick 18-8ss | inquire |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 1.375 x 2.209 x .125 | 1.375 x 2.209 x .125 flat washer black nylon | inquire |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain | 1 1/4 | 1/2 flat washer 1-1/4 od .080 thick aluminum | inquire |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
