FCH Member Advertisement
FCH News
6 Countersink Cutters
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
64 results, (click on any line for more information)
| Buy Countersink Cutters from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| THRDFAST | FL | Countersink Cutters | 5 7/16 x 3/16 x 2 3/4 | combined drill & countersink bit | 3 |
| ||
| Bossard | AZ | Countersink Cutters | Steel | screw pan hd 6-32 x .62 nas8101-10 | 160 |
| ||
| Mansco | MI | Countersink Cutters | Steel | ASTM F1941-10 Fe/Zn-Ni | 5/16-18 x 3/4 slot bolt hardened steel gmw 4205 blk | 1088 |
| |
| Century | NY | Countersink Cutters | Steel | 5/16 x 3/4 shoudler bolt 1/4-20 thread alloy b18.3 | 200 |
| ||
| Catalina | AZ | Countersink Cutters | Steel | M6-1.00 x 22 | bolt & washer m6-1.0x22 10b21 silver w/washer 17.20x1.8 | 259,500 |
| |
| BIG BOLT | IL | Countersink Cutters | Class 10.9 | Plain | M16-2.00 x 60 | bolts & cap screws12 point flange screw (counterbore) | 8350 |
|
| Komar | OH | Countersink Cutters | Steel | 5/16-18 x 1 1/4 bolt-rib(.354x.435)neck hdrpt 18-8 | 1920 |
| ||
| Endries | WI | Countersink Cutters | Steel | Zinc/Yellow | 7/16-14 x 1 1/4 | 7/16-14 x 1 1/4 gr. 8 ca rriage bolt-zy | 11235 |
|
| Century | NY | Countersink Cutters | Steel | an7-12a 7/16-20 x 1.34 bolt | 27 |
| ||
| Ababa | CA | Countersink Cutters | Steel | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 dia rnd s/s capped bmpr bolt (1/pk) | 4 |
| |
| WINA | MN | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | bolt elv st zn 5/16-18x1 1/2 | 3273 |
|
| Wurth Ind | IN | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | bolt elv st zn 5/16-18x1 1/2 steel zinc/clear | 3273 |
|
| ACF | CA | Countersink Cutters | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18 x 1 3/4 | 5/16-18x1-3/4 s/s 12 point counterbore capscrew | 3953 |
| |
| IPC | VA | Countersink Cutters | Steel | Phosphate | 5/16-18 x 2 1/2 | 5/16-18x2 1/2 12 pt. counterbore screw gmw-3179h phos & oil 170m tensile must gauge 3a after plating | 1,693 |
|
| Jay-Cee | MI | Countersink Cutters | Steel | w51618 bolt 5/16-18 | inquire |
| ||
| Ababa | CA | Countersink Cutters | 1-3/64 1/8 | 1 (3/64) 1/8 body x 1-1/4 oal drill/countersink hss | 3 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 oal drill/countersink hss | 12 |
| ||
| Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 oal drill/countersink hss | 12 |
| ||
| Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 oal drill/countersink hss | 3 |
| ||
| Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 3 |
| ||
| Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 2 |
| ||
| Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 oal drill/countersink hss | 2 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 o.a.l carbide drill/countersink | 3 |
| ||
| Ababa | CA | Countersink Cutters | 4-1/8 5/16 | 4 (1/8) 5/16 body x 2-1/8 o.a.l carbide drill/countersink | 2 |
| ||
| Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 o.a.l carbide drill/countersink | 1 |
| ||
| Ababa | CA | Countersink Cutters | 2-5/64 3/16 | 2 (5/64) 3/16 body x 2 o.a.l carbide drill/countersink | 1 |
| ||
| Ababa | CA | Countersink Cutters | Steel | Chrome Plated | M6-26 | m6 x 26mm chrome mirror mounting bolt (1/pk) | 3 |
|
| Jackson | MS | Countersink Cutters | 5/16 | 5/16 countersink 1 flute 82 degree | 1 |
| ||
| Jackson | MS | Countersink Cutters | Steel | 56 | 56 hole bin 33.75w x 42 tall x 12 deep bolt bin | 1 |
| |
| HBBOLT | CA | Countersink Cutters | 5/16 | single-flute countersink [82] | 4 |
| ||
| HBBOLT | CA | Countersink Cutters | #6 | zero-flute countersink [82] | 15 |
| ||
| Endries | WI | Countersink Cutters | Steel | 3/16 | sc-7 45 degree 3/16 pilot high speed steel thread stop countersink | 33 |
| |
| MESAFAST | CA | Countersink Cutters | Plain | #6 82 | degree single flute countersink | 3.0 |
| |
| THRDFAST | FL | Countersink Cutters | 5/16 | countersink bit | 1 |
| ||
| THRDFAST | FL | Countersink Cutters | 3/16 | countersink bit | 1 |
| ||
| BoltCraft | NE | Countersink Cutters | 1-6 | 1-6 regular hss combined drill bit and countersink set | inquire |
| ||
| BHAM | AL | Countersink Cutters | Steel | tight seal bolt clamp 6-29/32 to 7-7/3 | 198 |
| ||
| Komar | OH | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 2 1/2 bolt(1/4hd)rib nk f/t gr5.1 zc | 1350 |
| |
| IPC | VA | Countersink Cutters | #6 | #6 hss rh 60 degree combined drill and countersink keo | 2 |
| ||
| IPC | VA | Countersink Cutters | #6 | #6hss rh 82 degree combined drill and countersink keo | 12 |
| ||
| Endries | WI | Countersink Cutters | Steel | 496 1/4 | 496 1/4 high speed steel 6 flute 82 degree chatterless countersink | 5 |
| |
| Endries | WI | Countersink Cutters | Steel | 15656 1/2 tip 3/16 pilot 1-5/32 overall length 45 degree 4 flute countersink cutter | 15 |
| ||
| MMCC | IL | Countersink Cutters | M6 | m6 countersink din 18 hss | inquire |
| ||
| MMCC | IL | Countersink Cutters | 316, 317, A4 Stainless | M16.5 | m16.5mm countersink bit mm volkel/67316 | 237 |
| |
| MMCC | IL | Countersink Cutters | M6.3 | m6.3mm countersink bit mm volkel/67306 | 35 |
| ||
| MMCC | IL | Countersink Cutters | M6.3-20.50 | m6.3mm-20.5mm countersink bit set 6.3mm 20.5mm volkel/67300 | inquire |
| ||
| MMCC | IL | Countersink Cutters | M6.3-M20.50 | mm6.3-m20.5 countersink bit set m6.3 m20.5 volkel/67423 | 16 |
| ||
| Endries | WI | Countersink Cutters | Steel | 5/16 | c18 5/8in type-c 4 flute 5/16in drill hole countersink | 6 |
| |
| Endries | WI | Countersink Cutters | Steel | 15675 3/4 | 15675 3/4 tip 3/16 pilot 1-3/16 overall length 45 degree 4 flute countersink cutter | 2 |
| |
| Hodell | OH | Countersink Cutters | Steel | Galvanized | 5/16-18 x 3 | 5/16-18 x 3 gr5 c/s hdg n.am. | | 250 |
|
| GLF | OH | Countersink Cutters | Steel | Plain | m16-2.00 x 70mm special fit bolt 6g thread fit class 8.8 plain | () () | 50 |
| |
| Century | NY | Countersink Cutters | Steel | parker hannifin 5843106-104 bolt-fsi | 5 |
| ||
| Century | FL | Countersink Cutters | Steel | barnhill bolt 282-632-a-01aaa 6-32 nut thin nylon locking insert | 14 |
| ||
| Century | NY | Countersink Cutters | Steel | barnhill bolt 282-632-a-01aaa 6-32 nut thin nylon locking insert | 14 |
| ||
| Fastener | OH | Countersink Cutters | 5/16 | countersink six flute 60deg 5/16 | 5 |
| ||
| Century | NY | Countersink Cutters | Steel | an5-22a bolt aircraft 5/16-24 x 2-7/32 | 6 |
| ||
| American | WI | Countersink Cutters | Steel | Zinc/Yellow | 9/16-18 x 1 3/4 | 9/16-18x1-3/4 nc he hd c/s gr 8 zinc yellow | 198 |
|
| NutsBolts | NE | Countersink Cutters | Steel | 60 | roof ring expndr bolt 60 | | 2500 |
| |
| Century | NY | Countersink Cutters | Steel | bsnyld46 6in bolt-down swivel leveling m | 83 |
| ||
| Century | NY | Countersink Cutters | Steel | 5/16-18 (2a) x 5 5/8 housing bolt per print 4140 steel | 100 |
| ||
| AFI | FL | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 | 5/16-18 corner bolt steel zinc () | 1000 |
|
| Mansco | MI | Countersink Cutters | Steel | 6 x 9 gray abrasive clean & finish hand pad ultra fine s/c 60/box | 62 |
| ||
| Century | FL | Countersink Cutters | Steel | 116165-1 bolt-tension spline () () | 8 |
| ||
| Century | FL | Countersink Cutters | Steel | bsnyld46 6in bolt-down swivel leveling m | 83 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
