FCH Member Advertisement
FCH News
3/4 Countersink Cutters
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
26 results, (click on any line for more information)
| Buy Countersink Cutters from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| YANKEE | NH | Countersink Cutters | M3/4 x 6 | drill/countersink combo 3/4x6 ll | 1 |
| ||
| All Size | TX | Countersink Cutters | 3/4 x 3/8 | 3/4 x 3/8 82 degree countersink single flute | 3 |
| ||
| GLF | OH | Countersink Cutters | 3/4 x 1 | 3/4 1-flute 82 deg countersink hss () () () | 17 |
| ||
| GLF | OH | Countersink Cutters | 3/4 x 1 | 3/4 1-flute 90 deg countersink hss () () () | 2 |
| ||
| B & K FAST | PA | Countersink Cutters | 3/4 x 6 | 3/4 x 82 deg 6 flute countersink | 1 |
| ||
| BoltCraft | NE | Countersink Cutters | 3/4 x 82 | 3/4 82 brute hss single flute countersink | inquire |
| ||
| NutsBolts | NE | Countersink Cutters | 3/4 x 82 | 3/4 82 countersink bit | 6 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 82 deg. | 2 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 82 deg. | 3 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 100 deg. | 1 |
| ||
| Ababa | CA | Countersink Cutters | Steel | 3/4 | 3/4 three flute countersink 90 deg. | 2 |
| |
| YANKEE | NH | Countersink Cutters | Steel | 3/4-3 | 3/4-3 flute hss countersink-82 degree | 1 |
| |
| HBBOLT | CA | Countersink Cutters | 3/4 | single-flute countersink [82 / carbide] | 2 |
| ||
| HBBOLT | CA | Countersink Cutters | 3/4 | single-flute countersink [82] | 1 |
| ||
| MESAFAST | CA | Countersink Cutters | 3/4 | 3/4 82 degree single flute countersink | 1.0 |
| ||
| NAPPCO | TX | Countersink Cutters | 3/4 | 3/4 hss countersink three flute 82 angle | 9 |
| ||
| Jackson | MS | Countersink Cutters | Steel | Plain | 3/4 | countersink 6 flute 82 degree | 3 |
|
| HBBOLT | CA | Countersink Cutters | Steel | Plain | 3/4 | multi-flute countersink [hss] | 8 |
|
| MidStates | MI | Countersink Cutters | 3/4 | 3/4 #799 countersink 3-flute | 1 |
| ||
| Endries | WI | Countersink Cutters | Steel | 15675 3/4 | 15675 3/4 tip 3/16 pilot 1-3/16 overall length 45 degree 4 flute countersink cutter | 2 |
| |
| American | WI | Countersink Cutters | Steel | Plain | 3/4-10 x 3 1/2 | 3/4-10x3-1/2 nc coupling bolt gr2 plain | 17 |
|
| Fastener | OH | Countersink Cutters | 3/4 | countersink single flute 60deg 3/4 | 4 |
| ||
| Century | NY | Countersink Cutters | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 3/4-10 x 3 fully threaded c/s g-8 zinc-flake duplex e2a | 25 |
| |
| NutsBolts | NE | Countersink Cutters | Steel | 3/4 | 3/4 jaw 3 pc/set-24 c50l/hp8/mg | | 1 |
| |
| Hodell | OH | Countersink Cutters | Steel | Galvanized | 3/4-10 x 5 1/2 | 3/4-10 x 5 1/2 hilti kwik bolt iii hotdip galv #378090 | | 2 |
|
| Hodell | OH | Countersink Cutters | Steel | Plain | 3/4-10 x 5 | 3/4-10 x 5 gr5 c/s pln | | 36 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
