FCH Member Advertisement
FCH News
3 Countersink Cutters
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
86 results, (click on any line for more information)
| Buy Countersink Cutters from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| YANKEE | NH | Countersink Cutters | M3/4 x 6 | drill/countersink combo 3/4x6 ll | 1 |
| ||
| All Size | TX | Countersink Cutters | 3/8 x 1/4 | 3/8 x 1/4 82 degree countersink single flute | 19 |
| ||
| All Size | TX | Countersink Cutters | 3/8 x 1/4 | 3/8 x 1/4 82 degree countersink single flute keo | 10 |
| ||
| Wurth | IN | Countersink Cutters | 1 3/8 x 1/4 | 1 ea 3/8 x 1/4 hss 82deg 3fl countersink std pack1 | 50 |
| ||
| All Size | TX | Countersink Cutters | 3/4 x 3/8 | 3/4 x 3/8 82 degree countersink single flute | 3 |
| ||
| Optimas | IL | Countersink Cutters | Steel | Black Oxide | 1 15/32 x 1/2 | 1-15/32x1/2 shank 82 black hss single end countersink | 10 |
|
| GLF | OH | Countersink Cutters | 3/4 x 1 | 3/4 1-flute 82 deg countersink hss () () () | 17 |
| ||
| GLF | OH | Countersink Cutters | 3/4 x 1 | 3/4 1-flute 90 deg countersink hss () () () | 2 |
| ||
| Northern | MN | Countersink Cutters | 1/2-13 x 1 | pt counterbore capscrew | 21 |
| ||
| National | Ont | Countersink Cutters | Steel | Zinc/Clear | 3/8-16 x 1 | 3/8-16x1 carrbolt gr2 stl zinc | 550 |
|
| Ababa | CA | Countersink Cutters | Steel | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 rnd stainless capped bmpr bolt (1/pk) | 4 |
| |
| WINA | MN | Countersink Cutters | Steel | Plain | 3/8-16 x 1 1/2 | bolt elv st pl 3/8-16x1 1/2 | 240 |
|
| Wurth Ind | IN | Countersink Cutters | Steel | Plain | 3/8-16 x 1 1/2 | bolt elv st pl 3/8-16x1 1/2 steel plain | 240 |
|
| ACF | CA | Countersink Cutters | 1/2-13 x 1 3/4 | 1/2-13x1-3/4 12 point counterbore cap screw thermal black | 215 |
| ||
| Wurth | IN | Countersink Cutters | Steel | Black Oxide | 1 3/8 x 2 x 1/4 | 1ea 3/8 x 2 l x 1/4 shank x 82 single flute black finish countersink | 14 |
|
| OSSCO | RI | Countersink Cutters | #3 x 2 | #3 2 center drill & countersink | 4 |
| ||
| B & K FAST | PA | Countersink Cutters | 3/8 x 6 | 3/8 x 82 deg 6 flute countersink | 1 |
| ||
| B & K FAST | PA | Countersink Cutters | 3/4 x 6 | 3/4 x 82 deg 6 flute countersink | 1 |
| ||
| GLF | OH | Countersink Cutters | 3/8 x 6 | 3/8 6-flute countersink hss () () () | 1 |
| ||
| SRF | AL | Countersink Cutters | Steel | Plain | #3 x 82 | deg hss 5/16x25/32 countersink | - |
|
| BoltCraft | NE | Countersink Cutters | 3/4 x 82 | 3/4 82 brute hss single flute countersink | inquire |
| ||
| NutsBolts | NE | Countersink Cutters | 3/4 x 82 | 3/4 82 countersink bit | 6 |
| ||
| B & K FAST | PA | Countersink Cutters | #3 | #3 combined drill & countersink | 1 |
| ||
| SII | IN | Countersink Cutters | 3/8 | 3/8 hss 82 6 flute countersink | 4 |
| ||
| Ababa | CA | Countersink Cutters | 1-3/64 1/8 | 1 (3/64) 1/8 body x 1-1/4 oal drill/countersink hss | 3 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 oal drill/countersink hss | 12 |
| ||
| Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 3 |
| ||
| Ababa | CA | Countersink Cutters | 5-3/16 7/16 | 5 (3/16) 7/16 body x 2-3/4 oal drill/countersink hss | 2 |
| ||
| Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 oal drill/countersink hss | 2 |
| ||
| Ababa | CA | Countersink Cutters | 0-1/32 1/8 | 0 (1/32) 1/8 body x 1-1/4 oal drill/countersink hss | 12 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 o.a.l carbide drill/countersink | 3 |
| ||
| Ababa | CA | Countersink Cutters | 6-7/32 1/2 | 6 (7/32) 1/2 body x 3 o.a.l carbide drill/countersink | 1 |
| ||
| Ababa | CA | Countersink Cutters | 0-1/32 1/8 | 0 (1/32) 1/8 body x 1-1/2 o.a.l drill/countersink | 1 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 82 deg. | 2 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 82 deg. | 3 |
| ||
| Ababa | CA | Countersink Cutters | 3/8 | 3/8 three flute countersink 82 deg. | 4 |
| ||
| Ababa | CA | Countersink Cutters | 3/8 | 3/8 three flute countersink 82 deg. | 2 |
| ||
| Ababa | CA | Countersink Cutters | 3/8 | 3/8 three flute countersink 100 deg. | 2 |
| ||
| Ababa | CA | Countersink Cutters | 3/4 | 3/4 three flute countersink 100 deg. | 1 |
| ||
| Ababa | CA | Countersink Cutters | 2-5/64 3/16 | 2 (5/64) 3/16 body x 2 o.a.l carbide drill/countersink | 1 |
| ||
| Set Screw | IL | Countersink Cutters | Steel | #10-32 x .320 5n plier bolt alloy sae 4135 heat treated r/c 38-42 | inquire |
| ||
| YANKEE | NH | Countersink Cutters | 3 | 3 flute countersink-60deg-1/2 tool | 1 |
| ||
| Ababa | CA | Countersink Cutters | Steel | 3/4 | 3/4 three flute countersink 90 deg. | 2 |
| |
| Ababa | CA | Countersink Cutters | Steel | 3/8 | 3/8 three flute countersink 90 deg. | 2 |
| |
| Jackson | MS | Countersink Cutters | 3/8 | 3/8 countersink 1 flute 82 degree | 1 |
| ||
| YANKEE | NH | Countersink Cutters | Steel | 3/4-3 | 3/4-3 flute hss countersink-82 degree | 1 |
| |
| HBBOLT | CA | Countersink Cutters | 3/4 | single-flute countersink [82 / carbide] | 2 |
| ||
| HBBOLT | CA | Countersink Cutters | 3/8 | single-flute countersink [82 / carbide] | 2 |
| ||
| HBBOLT | CA | Countersink Cutters | 3/8 | single-flute countersink [82] | 7 |
| ||
| HBBOLT | CA | Countersink Cutters | 3/4 | single-flute countersink [82] | 1 |
| ||
| Endries | WI | Countersink Cutters | Steel | 3/16 | sc-7 45 degree 3/16 pilot high speed steel thread stop countersink | 33 |
| |
| MESAFAST | CA | Countersink Cutters | 3/4 | 3/4 82 degree single flute countersink | 1.0 |
| ||
| THRDFAST | FL | Countersink Cutters | 3/16 | countersink bit | 1 |
| ||
| NAPPCO | TX | Countersink Cutters | 3/4 | 3/4 hss countersink three flute 82 angle | 9 |
| ||
| NAPPCO | TX | Countersink Cutters | 3/8 | 3/8 hss countersink three flute 82 angle | 1 |
| ||
| SRF | AL | Countersink Cutters | Steel | Plain | 3/8 | sgl flute countersink 82 deg | - |
|
| Jackson | MS | Countersink Cutters | Steel | Plain | 3/4 | countersink 6 flute 82 degree | 3 |
|
| HBBOLT | CA | Countersink Cutters | Steel | Plain | 3/4 | multi-flute countersink [hss] | 8 |
|
| IPC | VA | Countersink Cutters | #3 | #3 hss rh 60 degree combined drill and countersink keo | 9 |
| ||
| MidStates | MI | Countersink Cutters | 3/4 | 3/4 #799 countersink 3-flute | 1 |
| ||
| MMCC | IL | Countersink Cutters | M8.3 | m8.3mm countersink bit mm volkel/67308 | 48 |
| ||
| MMCC | IL | Countersink Cutters | M6.3 | m6.3mm countersink bit mm volkel/67306 | 35 |
| ||
| MMCC | IL | Countersink Cutters | M6.3-20.50 | m6.3mm-20.5mm countersink bit set 6.3mm 20.5mm volkel/67300 | inquire |
| ||
| MMCC | IL | Countersink Cutters | M6.3-M20.50 | mm6.3-m20.5 countersink bit set m6.3 m20.5 volkel/67423 | 16 |
| ||
| Endries | WI | Countersink Cutters | Steel | Zinc/Clear | 3/8-16 x 5 | 3/8-16 x 5 gr. 8 c/s zin c/yellow | 6511 |
|
| Endries | WI | Countersink Cutters | Steel | 15675 3/4 | 15675 3/4 tip 3/16 pilot 1-3/16 overall length 45 degree 4 flute countersink cutter | 2 |
| |
| Endries | WI | Countersink Cutters | Steel | 3/8-24 | 15691 sc-12 3/4 diameter f pilot 3/8-24 countersink cutter | 15 |
| |
| American | WI | Countersink Cutters | Steel | Plain | 3/4-10 x 3 1/2 | 3/4-10x3-1/2 nc coupling bolt gr2 plain | 17 |
|
| Fastener | OH | Countersink Cutters | 3/4 | countersink single flute 60deg 3/4 | 4 |
| ||
| Century | NY | Countersink Cutters | Steel | parker hannifin 5843106-104 bolt-fsi | 5 |
| ||
| Century | NY | Countersink Cutters | Steel | parker aerospace 38-18300-1003-2 rev.b bolt | 41 |
| ||
| Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 3 1/2 | 3-1/2 chain bolt zinc 5701xv (1 per pkg) | 45 |
|
| Century | NY | Countersink Cutters | Steel | 3/8x3 shlr. bolt alloy + gmw3200 plating 5/16-18 thread | 100 |
| ||
| Century | NY | Countersink Cutters | Steel | 7340059 bolt us army 7340059 | 696 |
| ||
| Century | NY | Countersink Cutters | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 3/4-10 x 3 fully threaded c/s g-8 zinc-flake duplex e2a | 25 |
| |
| Century | NY | Countersink Cutters | Nylon (Polyamide) | Zinc/Yellow | micro plastics 12sws3515 white zytel for 3/8 bolt | 807 |
| |
| NutsBolts | NE | Countersink Cutters | Steel | 3/4 | 3/4 jaw 3 pc/set-24 c50l/hp8/mg | | 1 |
| |
| Fastener | OH | Countersink Cutters | 3/8 | countersink six flute 60deg 3/8 | 3 |
| ||
| American | WI | Countersink Cutters | Steel | #3 | #3 combined drill & countersink 60 degree included angle hss 4 oal | 7 |
| |
| Century | NY | Countersink Cutters | Steel | an5-20a bolt .31-2 | 4 |
| ||
| National | Ont | Countersink Cutters | Steel | 3/8-2 1/8 | 3/8-2 1/8 bolt | 16500 |
| |
| Hodell | OH | Countersink Cutters | Steel | Galvanized | 3/4-10 x 5 1/2 | 3/4-10 x 5 1/2 hilti kwik bolt iii hotdip galv #378090 | | 2 |
|
| GLF | OH | Countersink Cutters | Steel | 331 | 331 puller bolt | | 50 |
| |
| THRDFAST | AL | Countersink Cutters | 3/8 | countersink bit | 3 |
| ||
| Century | NY | Countersink Cutters | Steel | an5c13a bolt .31-2 | 5 |
| ||
| Hodell | OH | Countersink Cutters | Steel | Plain | 3/4-10 x 5 | 3/4-10 x 5 gr5 c/s pln | | 36 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
