FCH Member Advertisement
FCH News
Countersink Cutters, Steel
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
> 200 matches, . Showing 200, (click on any line for more information)
| Buy Countersink Cutters from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Countersink Cutters | Steel | labels custom printed per order bolt bin | 851 |
| ||
| Jackson | MS | Countersink Cutters | Steel | 1/2-13 x 1nc left hand grade 8 bolt custom order | 6 |
| ||
| TownCountry | AR | Countersink Cutters | Steel | Plain | 5/8 | center reamer countersink 3 flute 82 deg. 1/2 shank | 3 |
|
| Jackson | MS | Countersink Cutters | Steel | Plain | 1 | 1 countersink 6 flute 82 degree hss | 2 |
|
| Jackson | MS | Countersink Cutters | Steel | 40 | 40 hole bin 33.75w x 23.75 tall x 12 deep bolt bin | 4 |
| |
| Jackson | MS | Countersink Cutters | Steel | 56 | 56 hole bin 33.75w x 42 tall x 12 deep bolt bin | 1 |
| |
| Jackson | MS | Countersink Cutters | Steel | Plain | flute 82 degree chatterless countersink hs m-2 #39e132b | 18 |
| |
| Jackson | MS | Countersink Cutters | Steel | Plain | 3/4 | countersink 6 flute 82 degree | 3 |
|
| Jackson | MS | Countersink Cutters | Steel | Plain | flute 82 degree countersink | 8 |
| |
| Set Screw | IL | Countersink Cutters | Steel | #10-32 x .320 5n plier bolt not hard | inquire |
| ||
| Set Screw | IL | Countersink Cutters | Steel | #10-32 x .320 5n plier bolt alloy sae 4135 heat treated r/c 38-42 | inquire |
| ||
| Komar | AR | Countersink Cutters | Steel | 1/2 dia countersink bit w/1/4 shank |
| |||
| Komar | OH | Countersink Cutters | Steel | Zinc/Black | bolt(drill)5/16-18 thread w/.125wx.15od groove blk zc |
| ||
| Komar | OH | Countersink Cutters | Steel | Zinc/Black | bolt(drill)m8x1.25 thread w/m6x1 x10mm thread blk zinc |
| ||
| NAPPCO | TX | Countersink Cutters | Steel | 72 hole steel bolt bin gray | 1 |
| ||
| YANKEE | NH | Countersink Cutters | Steel | 5/8-3 | 5/8-3 flute hss countersink-82 degree | 1 |
| |
| YANKEE | NH | Countersink Cutters | Steel | 3/4-3 | 3/4-3 flute hss countersink-82 degree | 1 |
| |
| Endries | WI | Countersink Cutters | Steel | 3/16 | sc-7 45 degree 3/16 pilot high speed steel thread stop countersink | 33 |
| |
| Endries | WI | Countersink Cutters | Steel | 1/4 | 195-1/2 1/2 82 degree 5 flute 1/4 shank countersink bit | 138 |
| |
| BHAM | AL | Countersink Cutters | Steel | tight seal bolt clamp 6-29/32 to 7-7/3 | 198 |
| ||
| BHAM | AL | Countersink Cutters | Steel | Galvanized | 5/8-11 x 2 7/8 | 5/8-11 x 2 7/8 cevis bolt gr 5 hdg | | 26643 |
|
| Endries | WI | Countersink Cutters | Steel | Zinc/Yellow | 38-42mm w1 grade band clamp yellow zinc 20mm band & m6x50 bolt | 4135 |
| |
| Endries | WI | Countersink Cutters | Steel | 15656 1/2 tip 3/16 pilot 1-5/32 overall length 45 degree 4 flute countersink cutter | 15 |
| ||
| Endries | WI | Countersink Cutters | Steel | Zinc/Black | pt438135-202 7/16 retaining bolt trivalent black zinc | 3513 |
| |
| Endries | WI | Countersink Cutters | Steel | 5/16 | c18 5/8in type-c 4 flute 5/16in drill hole countersink | 6 |
| |
| Endries | WI | Countersink Cutters | Steel | Zinc/Clear | 3/8-16 x 5 | 3/8-16 x 5 gr. 8 c/s zin c/yellow | 6511 |
|
| Endries | WI | Countersink Cutters | Steel | Zinc/Yellow | 7/16-14 x 1 1/4 | 7/16-14 x 1 1/4 gr. 8 ca rriage bolt-zy | 11235 |
|
| Endries | WI | Countersink Cutters | Steel | 15675 3/4 | 15675 3/4 tip 3/16 pilot 1-3/16 overall length 45 degree 4 flute countersink cutter | 2 |
| |
| Century | FL | Countersink Cutters | Steel | boeing bacb30vf4k7 bolt | 26 |
| ||
| Century | FL | Countersink Cutters | Steel | an5c5a bolt | 2 |
| ||
| Century | NY | Countersink Cutters | Steel | nas1221r04e1 bolt | 2 |
| ||
| Century | FL | Countersink Cutters | Steel | pbf4356-4-0625 bolt | 364 |
| ||
| GLF | OH | Countersink Cutters | Steel | m12-1.25 x 35 bolt w/washer per dwg 10-10724 () () () | 18804 |
| ||
| Century | FL | Countersink Cutters | Steel | boeing bacb30vf4k5 bolt | 12 |
| ||
| Century | FL | Countersink Cutters | Steel | b1821bh025c056n bolt | 10 |
| ||
| Century | FL | Countersink Cutters | Steel | an4h5a bolt | 7 |
| ||
| Century | FL | Countersink Cutters | Steel | as3236-05 bolt | 2000 |
| ||
| Century | FL | Countersink Cutters | Steel | barnhill bolt 282-632-a-01aaa 6-32 nut thin nylon locking insert | 14 |
| ||
| Century | FL | Countersink Cutters | Steel | an3c7a bolt | 20 |
| ||
| Century | FL | Countersink Cutters | Steel | hl12vap-8-7 bolt | 15 |
| ||
| American | WI | Countersink Cutters | Steel | Plain | 3/4-10 x 3 1/2 | 3/4-10x3-1/2 nc coupling bolt gr2 plain | 17 |
|
| American | WI | Countersink Cutters | Steel | #4 | #4 combined drill & countersink 60 degree included angle hss 6 oal | 7 |
| |
| American | WI | Countersink Cutters | Steel | 2-4 1/2 x 7 3/4 | 2-4-1/2x7-3/4 coupling bolt gr 2 w/3-1/16 thread | 4 |
| |
| American | WI | Countersink Cutters | Steel | bolt bag wdl-2000 cart | 10 |
| ||
| American | WI | Countersink Cutters | Steel | bolt bag hdl 1040-50-16 sect | 3 |
| ||
| GLF | OH | Countersink Cutters | Steel | Plain | m16-2.00 x 70mm special fit bolt 6g thread fit class 8.8 plain | () () | 50 |
| |
| Bossard | AZ | Countersink Cutters | Steel | rev 4.1 bolt m4-0.7 x 18 (88) | 4638 |
| ||
| Endries | WI | Countersink Cutters | Steel | 496 1/4 | 496 1/4 high speed steel 6 flute 82 degree chatterless countersink | 5 |
| |
| YANKEE | NH | Countersink Cutters | Steel | single flute countersink-82deg-1/2 tool high speed steel | 1 |
| ||
| Jay-Cee | MI | Countersink Cutters | Steel | bolt m12 for bp60 riveter | inquire |
| ||
| Jay-Cee | MI | Countersink Cutters | Steel | w14020 bolt 1/4-20 | inquire |
| ||
| Jay-Cee | MI | Countersink Cutters | Steel | w51618 bolt 5/16-18 | inquire |
| ||
| Catalina | AZ | Countersink Cutters | Steel | M6-1.00 x 22 | bolt & washer m6-1.0x22 10b21 silver w/washer 17.20x1.8 | 259,500 |
| |
| Catalina | AZ | Countersink Cutters | Steel | M10-17 | bolt m10x17 t50 m10x17 swrch45k t50 black | 41,600 |
| |
| Century | FL | Countersink Cutters | Steel | cherry ccpv-08-06 monobolt stainless steel stainless steel protruding | 50 |
| ||
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x7b18.2.1 | 241 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)5/16-18x512 pt counter bore | 3600 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x812pt (hardened) | 300 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x4b18.2.1 | 264 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Phosphate | bolts & cap screws12 point flange screw (counterbore)m10x15012pt flange oiled | 93000 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)m48x180socket | 45 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x8b18.2.1 | 380 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-12x612pt (hardened) | 300 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-12x1012pt (hardened) | 200 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-12x1212pt (hardened) | 250 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x6b18.2.1 | 412 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | M12 x 3512 | bolts & cap screws12 point flange screw (counterbore)pt | 823 |
|
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x12b18.2.1 | 181 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | bolts & cap screws12 point flange screw (counterbore)1 3/4-5x10b18.2.1 | 161 |
| |
| BIG BOLT | IL | Countersink Cutters | Steel | Plain | M12 x 7012 | bolts & cap screws12 point flange screw (counterbore)pt | 5000 |
|
| MESAFAST | CA | Countersink Cutters | Steel | 5/8 | 5/8 82 degree five flute countersink | 5.0 |
| |
| Wurth Ind | IN | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | bolt elv st zn 5/16-18x1 1/2 steel zinc/clear | 3273 |
|
| SWACO | OH | Countersink Cutters | Steel | bolt pan head cross recess titanium | 242 |
| ||
| SWACO | OH | Countersink Cutters | Steel | retainer bolt two lug | 40 |
| ||
| SWACO | OH | Countersink Cutters | Steel | bolt 100 reduced head | 26 |
| ||
| SWACO | OH | Countersink Cutters | Steel | retainer bolt two lug | 75 |
| ||
| SWACO | OH | Countersink Cutters | Steel | 100 | bolt phillips titanium 100 | 109 |
| |
| SWACO | OH | Countersink Cutters | Steel | bolt pan head cross recess titanium | 6 |
| ||
| SWACO | OH | Countersink Cutters | Steel | bolt | 55 |
| ||
| National | Ont | Countersink Cutters | Steel | M8-22 | m8 x 22mm bolt with patch 10b21 steel s450b + nd ez2200 | 128800 |
| |
| National | Ont | Countersink Cutters | Steel | Zinc/Clear | 10-24 x 9/16 | 10-24x9/16 blst bolt sz revb rohs | 78185 |
|
| GLF | OH | Countersink Cutters | Steel | M8-1.25 x 35 | m8-1.25 x 35mm fit bolt 6g fit shank length 14m thread length 16mm class 8.8 | 36 |
| |
| Centennia | CO | Countersink Cutters | Steel | 1 1/4-7 x 5 1/2 | 1 1/4-7 x 5 1/2 mill linear bolt | 18 |
| |
| Centennia | CO | Countersink Cutters | Steel | 5/8 x 8 | 5/8 x 8 screw bolt | 5 |
| |
| WINA | MN | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | bolt elv st zn 5/16-18x1 1/2 | 3273 |
|
| WINA | MN | Countersink Cutters | Steel | Plain | 3/8-16 x 1 1/2 | bolt elv st pl 3/8-16x1 1/2 | 240 |
|
| Endries | WI | Countersink Cutters | Steel | 3/8-24 | 15691 sc-12 3/4 diameter f pilot 3/8-24 countersink cutter | 15 |
| |
| Mansco | MI | Countersink Cutters | Steel | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 3/4 slot bolt hardened black gmw4205 | 12500 |
| |
| Mansco | MI | Countersink Cutters | Steel | Plain | m24-3.0 x 260mm waisted shank bolt cl12.9 pln | 49 |
| |
| Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 3 1/2 | 3-1/2 chain bolt zinc 5701xv (1 per pkg) | 45 |
|
| Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | minifix 15 bolt steel zinc-plated b24 m6 x 7.5mm | 1000 |
| |
| Mansco | MI | Countersink Cutters | Steel | Black Oxide | 1/2-13 x 9.87 leveling bolt blk ox w/charcoal base | 50650 |
| |
| Mansco | MI | Countersink Cutters | Steel | ASTM F1941-10 Fe/Zn-Ni | 5/16-18 x 3/4 slot bolt hardened steel gmw 4205 blk | 1088 |
| |
| Mansco | MI | Countersink Cutters | Steel | Zinc/Clear | 1/2-13 x 4.937 glass leveler panel bolt triv znc | 2584 |
| |
| NutsBolts | NE | Countersink Cutters | Steel | uss bolt bin labels | | 7 |
| ||
| NutsBolts | NE | Countersink Cutters | Steel | 10 | ss bolt assembly 10 usa | | 24 |
| |
| NutsBolts | NE | Countersink Cutters | Steel | Galvanized | 5/8 x 5 | 5/8 x 5 strong bolt 2 mec galv | 15 |
|
| NutsBolts | NE | Countersink Cutters | Steel | ladder clip & bolt | | 31750 |
| ||
| NutsBolts | NE | Countersink Cutters | Steel | Zinc/Clear | 5/8 x 24 | 5/8 x 24 adj cane bolt zp | 4 |
|
| NutsBolts | NE | Countersink Cutters | Steel | 3/4 | 3/4 jaw 3 pc/set-24 c50l/hp8/mg | | 1 |
| |
| Hodell | OH | Countersink Cutters | Steel | Galvanized | 5/16-18 x 3 | 5/16-18 x 3 gr5 c/s hdg n.am. | | 250 |
|
| Hodell | OH | Countersink Cutters | Steel | M20 | m20 bolt clip to prt | | 1586 |
| |
| Ababa | CA | Countersink Cutters | Steel | 1/4 | 1/4 three flute countersink 90 deg. | 1 |
| |
| Ababa | CA | Countersink Cutters | Steel | 1 | 1 three flute countersink 90 deg. | 1 |
| |
| Ababa | CA | Countersink Cutters | Steel | 3/4 | 3/4 three flute countersink 90 deg. | 2 |
| |
| Ababa | CA | Countersink Cutters | Steel | 3/8 | 3/8 three flute countersink 90 deg. | 2 |
| |
| Ababa | CA | Countersink Cutters | Steel | 5/8 | 5/8 three flute countersink 90 deg. | 2 |
| |
| Ababa | CA | Countersink Cutters | Steel | Chrome Plated | M6-26 | m6 x 26mm chrome mirror mounting bolt (1/pk) | 3 |
|
| Ababa | CA | Countersink Cutters | Steel | Zinc/Clear | 10-24 x 3/4 | 10-24 x 3/4 screw znc mld g bolt (2/pk) | 4 |
|
| Ababa | CA | Countersink Cutters | Steel | 1/2-13 x 1 1/2 | 1/2-13 x 1 1/2 dia rnd s/s capped bmpr bolt (/1pk) | 1 |
| |
| Ababa | CA | Countersink Cutters | Steel | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 dia rnd s/s capped bmpr bolt (1/pk) | 4 |
| |
| Ababa | CA | Countersink Cutters | Steel | 10-24 x 3/4 | 10-24 x 3/4 bolt 1/2 x 1 25/64 plate mld g clip (2/pk) | 4 |
| |
| Ababa | CA | Countersink Cutters | Steel | M8-25 | m8x 25mm 19mm pan stainless capped bmpr bolt (2/pk) | 4 |
| |
| Ababa | CA | Countersink Cutters | Steel | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 rnd stainless capped bmpr bolt (1/pk) | 4 |
| |
| Ababa | CA | Countersink Cutters | Steel | 1/4-20 x 1 | 1/4-20 x 1 outside mirror mounting bolt (1/pk) | 1 |
| |
| Ababa | CA | Countersink Cutters | Steel | 10-24 x 3/4 | 10-24 x 3/4 bolt 1/2 x 1 1/16 plate mld g clip (2/pk) | 1 |
| |
| Ababa | CA | Countersink Cutters | Steel | Zinc/Clear | 1/4 x 2 1/4 | 1/4 x 2-1/4 screw bolt plus steel zinc pltd | 200 |
|
| AFI | FL | Countersink Cutters | Steel | type scb spinning clinch bolt () | 3385 |
| ||
| AFI | FL | Countersink Cutters | Steel | (25)1/4ser fl nut&1/4-20x5/8 sr fl boltg5 () | 1700 |
| ||
| Mansco | MI | Countersink Cutters | Steel | Plain | 1/2 x 3 | oal 6 flute 82 degree carbide countersink 1/box | 2 |
|
| Century | NY | Countersink Cutters | Steel | bacb30nx8k11 bolt boeing bacb30nx8k11 | 34 |
| ||
| Century | NY | Countersink Cutters | Steel | as3238-10 bolt | 28 |
| ||
| Century | NY | Countersink Cutters | Steel | an23-16 bolt | 6 |
| ||
| Century | NY | Countersink Cutters | Steel | an4c15 bolt | 20 |
| ||
| Century | NY | Countersink Cutters | Steel | an3c17a bolt | 9 |
| ||
| Century | NY | Countersink Cutters | Steel | 10-1167 bolt .375-16unc-2a 1.50 lng m500 astm f468 parker 10-1167 | 7 |
| ||
| Century | NY | Countersink Cutters | Steel | an5ch11a bolt | 4 |
| ||
| Century | NY | Countersink Cutters | Steel | bacb30nm3k5 bolt rev bb bolt boeing bacb30nm3k5 | 120 |
| ||
| Century | NY | Countersink Cutters | Steel | an4-30a bolt 1/4-28 x 3.03 | 20 |
| ||
| Century | NY | Countersink Cutters | Steel | nas1221r04e8 bolt 100 degree flush head | 14 |
| ||
| Century | NY | Countersink Cutters | Steel | Silver Plated | nwl 149018 bolt silver plate | 12 |
| |
| Century | NY | Countersink Cutters | Steel | ohio nut & bolt xn2115 | 1000 |
| ||
| Century | NY | Countersink Cutters | Steel | an8-30 bolt | 2 |
| ||
| Century | NY | Countersink Cutters | Steel | an4-37a bolt | 70 |
| ||
| Century | NY | Countersink Cutters | Steel | bac# bacb30vf08k4 bolt boeing bacb30vf08k4 | 380 |
| ||
| Century | NY | Countersink Cutters | Steel | nas674v9 bolt nas674v9 | 21 |
| ||
| Century | NY | Countersink Cutters | Steel | ohio nut & bolt rh3308 | 100 |
| ||
| Century | NY | Countersink Cutters | Steel | parker hannifin 5843106-104 bolt-fsi | 5 |
| ||
| Century | NY | Countersink Cutters | Steel | ohio nut & bolt bfs10324 | 2 |
| ||
| Century | NY | Countersink Cutters | Steel | b424278 bolt special | 77 |
| ||
| Komar | OH | Countersink Cutters | Steel | 5/16-18 x 1 1/4 bolt-rib(.354x.435)neck hdrpt 18-8 | 1920 |
| ||
| Komar | OH | Countersink Cutters | Steel | Zinc/Clear | 5/16-18 x 2 1/2 bolt(1/4hd)rib nk f/t gr5.1 zc | 1350 |
| |
| METRO IND | OH | Countersink Cutters | Steel | M14 x 50 | M14x50 counterbore thick flange 12 point cap screw alloy 170 000 psi | 7 |
| |
| IPC | VA | Countersink Cutters | Steel | Phosphate | 5/16-18 x 2 1/2 | 5/16-18x2 1/2 12 pt. counterbore screw gmw-3179h phos & oil 170m tensile must gauge 3a after plating | 1,693 |
|
| IPC | VA | Countersink Cutters | Steel | 1/2 | 1/2 in. high-speed steel countersink 5 flute 82 deg 1 3/4 long .25 shank dia | 22 |
| |
| HBBOLT | CA | Countersink Cutters | Steel | Plain | 3/4 | multi-flute countersink [hss] | 8 |
|
| HBBOLT | CA | Countersink Cutters | Steel | Plain | 5/8 | multi-flute countersink [hss] | 10 |
|
| ISSCO | MO | Countersink Cutters | Steel | Plain | 1 x 82 degree x 1/2 shank | high speed steel single flute 82 degree 1 x 2 3/4 od with 1/2 shank | 1 |
|
| ISSCO | MO | Countersink Cutters | Steel | Plain | #7 asa# | combined drill & countersink high speed steel 60 degree 1/4 drill 5/8 body 3 1/4 oalalpha cdhk50457 | 3 |
|
| SRF | AL | Countersink Cutters | Steel | Plain | 3/8 | sgl flute countersink 82 deg | - |
|
| SRF | AL | Countersink Cutters | Steel | Plain | #4 x 82 | deg hss 9/16x1-1/16 countersink | - |
|
| SRF | AL | Countersink Cutters | Steel | Plain | #3 x 82 | deg hss 5/16x25/32 countersink | - |
|
| SRF | AL | Countersink Cutters | Steel | Plain | #1 x 82 | deg hss 5/32x13/32 countersink | - |
|
| Wurth | IN | Countersink Cutters | Steel | countersinks 3/8 dia number of flutes 4 included angle 82 countersink material high speed steel countersink application countersinking | 20 |
| ||
| Wurth | IN | Countersink Cutters | Steel | Black Oxide | 1 3/8 x 2 x 1/4 | 1ea 3/8 x 2 l x 1/4 shank x 82 single flute black finish countersink | 14 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
