FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | hbd-120 w/1/2-20 tapped thru | 143 |
| |
| OneMonroe | NC | Handles | double. ball handle | 4 |
| |||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plastic | Plain | 1/4-28 | plastic ball 1 1/4-28 | 13 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plastic | Plain | 1 3/8 | plastic ball 1-3/8 3/8-24 | 32 |
|
| Shadran I | Slotted Spring Pin (Roll Pin) | Plain | 5/16 x 2 | 5/16x2 roll pin | 10 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plastic | Plain | 2 x 1/2 | plastic ball 2 x 1/2-20 | 20 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | M5 | control ball m5 25 od | 59 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | M8 | control ball m8 25od | 9 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | M6 | control ball m6 35 od | 8 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | M8 | control ball m8 35 od | 3 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 1 | ball w/shank 1 23/32 x 3/8-16 | 2 |
| |
| OneMonroe | NC | Latches & Catches | catch | 167 |
| |||
| OneMonroe | NC | Latches & Catches | catch | 1639 |
| |||
| OneMonroe | NC | Latches & Catches | wing turn catch | 3 |
| |||
| OneMonroe | NC | Latches & Catches | wing turn catch | 1 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | fabcel leveler (3032190) | 211 |
| |||
| OneMonroe | NC | Protective Caps & Plugs | Aluminum | 8 x 3 | wheel wheel size 8 x3 3-wheel wheel material polyurethane on aluminum flat tread hub length 3-1/2 load capacity 4960 lbs durometer 75 shore d axle size 3/4 | 12 |
| |
| OneMonroe | NC | Shaft Collars, & Adjusting Rings | Plain | 1 | 1 id sha ft collar w/set screw | 6 |
| |
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 torx flat f/b screw | 1100 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Zinc/Clear | 1/4-20 x 2 | 1/4-20 x 2 torx flat f/b screw-zp | 1140 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Zinc/Clear | 1/4-20 x 2 1/2 | 1/4-20 x 2-1/2 torx t27 flat thread cutting screw type f-zp | 550 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 1/4-20 x 3 | 1/4-20 x 3 torx flat f/b screw-blk | 919 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 5/16-18 x 2 1/4 | 5/16-18 x 2-1/4 torx flat f/b screw-blk | 49 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Zinc/Clear | 5/16-18 x 2 1/2 | 5/16-18 x 2-1/2 torx flat f/b screw-zinc plated | 200 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 5/16-18 x 6 | 5/16-18 x 6 torx flat f/b screw-blk | 130 |
|
| Century | FL | Self-Tapping Drive Screw (type u) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4 x 1/4 | #4 x 1/4 round hd type-u 18-8 | 123 |
|
| Century | FL | Machine Screw | Cadmium/Yellow | 1/4-28 x 21/32 | ms27039-4-10 | 27 |
| |
| Century | FL | Socket Head Cap Screw | Plain | #10-32 x 2 1/2 | nas1351c3-40 | 45 |
| |
| Olander | CA | Flat Head Socket Cap Screw | Steel | Plain | 5/16-18 x 5/8 flat soc alloy | 15 |
| |
| Olander | CA | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 3/8 roll pin sst rohs | 59 |
| |
| Olander | CA | Shoulder Washer (Screw Insulator) | Steel | Plain | shoulder wash nyl () () | 1482 |
| |
| Olander | CA | Machine Screw | Steel | Plain | 6-32 x 1 slot rd nyl | 14 |
| |
| Olander | CA | 300 Stainless (A1,A2, 18-8,304,310 etc.) | pic 6-32 captive scr sst () () | 101 |
| |||
| Olander | CA | Springs (Torsion) | century spring torsion spring | 200 |
| |||
| Olander | CA | Fully Threaded Stud (All Thread) | Steel | Plain | southco fractional turn stud assy () () | 29 |
| |
| Olander | CA | Swage Standoff | Aluminum | Plain | 6-32 x 2 x 1/4 hex swg standoff alum gold | 100 |
| |
| GLF | OH | SAE Flat Washer | Plain | 7/16 | 7/16 sae flat washer plain | 3213 |
| |
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-1.50 x 45 | m14-1.5 x 45 hhcs gr 8.8 stl zc din 933 | 18 |
|
| GLF | OH | Flat Head Socket Cap Screw | Steel | Plain | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 fhcs stl pln | 97 |
|
| GLF | OH | U-Bolt | Steel | Zinc/Clear | 5/16-18 x 1-1/4 x 2-3/4 | 1-1/4 x 5/16-18 x 2-3/4 u bolt stl zc | 38 |
|
| GLF | OH | Cable Clamps & Ties | Nylon (Polyamide) | Plain | 6 | 6 nyl cable tie 40lb uv blk | 500 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2-1/2 f/t stud 18-8 s/s | 28 |
|
| Hayes | CA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 5/16 x 2 (1/4-20) | 5/16 x 2 soc shoulder bolt alloy | 243 |
|
| Hayes | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M24-3.00 x 120 | m24-3.0 x 120 soc c/s 18-8ss pass | 20 |
|
| Hayes | CA | Blind Rivet | Aluminum | Plain | #66 | #66 blind rivet lg flange alum/ alum | 500 |
|
| Hayes | CA | Machine Screw | Steel | Plain | #10-32 x 7/16 | 10-32 x 7/16 phil truss m/s patch bk/ox | 4460 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain | 3/4-10 x 14 | 3/4-10 x 14 hex head cap screw asme | 8 |
|
| Brikksen | FL | Machine Screw | Plain | #10 x 1 3/4 | #10 x 1-3/4 phillips ovalal 82 degree | -5799 |
| |
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain | M8-1.25 x 16 | m8-1.25 x 16 hex head cap screw full | 10287 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #6-32 x 1/2 | 6-32 x 1/2 phil flat m/s patch zinc | 9425 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 | 6-32 x 1 phil flat m/s zinc | 675 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #4-40 x 5/8 | 4-40 x 5/8 phil truss m/s zinc | 1430 |
|
| Hayes | CA | Machine Screw | Steel | Plain | #6-32 x 1 3/4 | 6-32 x 1 3/4 phil flat m/s bk/ox | 300 |
|
| Brikksen | FL | Socket Head Cap Screw | null | Plain | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 hex socket head cap screw | 400 |
|
| Hayes | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-32 x 3/8 | 6-32 x 3/8 p-pan thread-roll int sems zinc | 1850 |
|
| Hayes | CA | Machine Screw | Steel | Plain | #6-32 x 5/8 | 6-32 x 5/8 phil flat m/s zii | 1000 |
|
| Brikksen | FL | Machine Screw | Plain | #8-32 x 2 1/2 | 8-32 x 2-1/2 phillips flat 82 degree | -589 |
| |
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #4-40 x 1/4 | 4-40 x 1/4 phil truss m/s zinc | 6300 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Black | #10-32 x 1 1/2 | 10-32 x 1 1/2 phil truss m/s blk zc | 215 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #8 x 3/4 | #8 x 3/4 phil pan plast 60-1 zinc | 10468 |
|
| Bossard | AZ | Adapters, Arbors, & Mandrels | Steel | mandrel 1 oversize for std nose avdel | 15 |
| ||
| Bossard | AZ | Flat Head Socket Cap Screw | Steel | Plain | screw flat hd socket cap | 1100 |
| |
| Centennia | CO | Hex Head Cap Screw | Grade 5 | Plain | 1-8 x 3 | 1-8 x 3 hex c/s gr5 nc dom | 51 |
|
| Centennia | CO | Finished Hex Nut | Plain | 1 1/2-6 | 1 1/2-6 hex finish nut | 14 |
| |
| Centennia | CO | Hex Machine Bolt | Grade A | Plain | 5/8-11 x 3 1/2 | 5/8-11 x 3 1/2 nc a307a hex mach bolt | 26 |
|
| Kanebridge | IL | Self-Tapping Self-Piercing Screw | Steel | Zinc/Clear | #12-11 x 3/4 | #12-11x3/4 phillips mod truss self pier full thread zinc and bake self piercing screw | 50000 |
|
| Kanebridge | IL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #8-16 x 1 3/4 | #8-16x1 3/4 6-lobe pan 188plast at48-2 st stl pass/wax plastite-alternatives | 20000 |
|
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #8-18 x 3/8 | #8-18x3/8 phillips pancake sds full thread #2pt zinc and bake self-drilling screws | 100000 |
|
| CIF | IL | Lock Nut, Flange, w serr. (Whi z-Lock etc.) | Class 10.9 | Zinc/Black | M5-0.80 | m5 x 0.8 hex flange locknut unserrated class 10 zinc black | 39532 |
|
| CIF | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | #10-16 x 3/4 | #10-16 x 3/4 phillips pan head hi lo screw shank slotted with blunt point 410 ss t 25 slot 37-42 hrc passivated plating per g-4108 | 2890 |
|
| CIF | IL | Flat Washer | Steel | Zinc/Clear | M4 | m4 flatwasher plated per zn6a | 1570 |
|
| Optimas | IL | Fuses & Holders | Plastic | Plain | M101.6 x 20.4 | 101.6mm x 20.4mm megafuse holder theromplastic black w/m8x1.25 thread (i) | 163.6842041015625 |
|
| Optimas | IL | O-Rings & Quad Ring Seals (X-Rings) | Zinc/Green | M18 x 2 x 9.26 x 1.78 | 18mm x 2mm w/9.26mm x 1.78mm smaller ring double o-ring hnbr green per dwg | 9600 |
| |
| SWACO | OH | Toggle Wings | Steel | Zinc/Clear | 1/2-13 | 1/2-13 toggle wing zn | 162 |
|
| SWACO | OH | Thread Repair Kit | Plain | 1030-10 heli-coil spk plug tap | 3 |
| ||
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Plain | M8-1.25 x 120 | m8-1.25x120 hhcs cl8.8 pln | 225 |
|
| SWACO | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 16 | m4-0.70x16 lhcs a2 ss ft din 7984 | 52 |
|
| SWACO | OH | Structural Blind Rivet | Aluminum | Plain | 1/4 | 02221-00814 hemlok str 1/4 pr st avdel rivet 66557 | 1225 |
|
| Irwin Ind | Ont | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-32 x 1 | 10-32x1 pan combo tfs thread rolling screw zinc triv clr & bake b18.6.4 | 10580 |
|
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 13/16 | #4-40x13/16 ph pan ms 18-8ss pln | 191 |
|
| SWACO | OH | Hex Machine Bolt | Grade A | Zinc/Clear | 3/4-10 x 2 1/4 | 3/4-10x2 1/4 hex bolt a307 gr a zn | 92 |
|
| SWACO | OH | Threaded Rod | Grade B7 | Plain | 3/8-24 x 3 | 3/8-24x3 threaded rod b-7 | 22 |
|
| SWACO | OH | Heavy Hex Jam Nut | Black Oxide | 3/4-10 | 3/4-10 heavy hex jam nut black oxide | 222 |
| |
| SWACO | OH | c3932-22ecp accuride slide | 2 |
| ||||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | 70815-04-250 dodge ultrsrt i | 495 |
| |||
| Irwin Ind | Ont | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/4 | 1/4 steel cotter pin zinc rohs | 4000 |
|
| Irwin Ind | Ont | photographic solutions eclipse optic cleaning system 2oz | 154 |
| ||||
| SWACO | OH | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/8 | #4-40 x 1/8 socket set screw half dog point stainless steel a2 | 100 |
|
| SWACO | OH | Woodruff Key | Steel | Plain | 5/32 x 3/4 | 1/4 x 1 1/8 woodruff key alloy steel #809 | 133 |
|
| Accutite | CA | Split Lock Washer | Nickel Plated | .0001-.0003 | 1204 shakeproof lockwasher plated watts nickel(.0001-.0003) | 24400 |
| |
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 104969 follower fc | 9 |
| ||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck hg-s-hs12 gauge-spin (3/8) mto | 5 |
| ||
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 1/4-20 x 3 | 1/4-20 x 3 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 1/2-13 x 4 1/2 | 1/2-13 x 4-1/2 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 7/16-20 x 3 1/4 | 7/16-20 x 3-1/4 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Black Oxide | #8-32 x 1 1/2 | #8-32 x 1-1/2 black oxide finish button socket cap screw | 200 |
|
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-18 x 3/4 | #6-18 x 3/4 square pan head sheet metal screw type-a 18-8 stainless steel | 1000 |
|
| OneMonroe | MN | Sockets | 3/8 | impact 3/8 drive metric socketimpact11mm-3/8 dr. 6 pt. metric impact socket | 6 |
| ||
| OneMonroe | MN | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 1/4-20 x 1/2 | screw hex cap 1/4-20x1/2 316 s/s | 90 |
|
| OneMonroe | MN | Ball Stud, Ball Pin | Plain | ball stud receiver | 1780 |
| ||
| OneMonroe | MN | Wood Screw | Steel | Zinc/Clear | #7 x 2 | 7 x 2 slotted rhws zp | 195 |
|
| OneMonroe | MN | Finished Hex Nut | Grade 5 | Zinc/Clear | 5/16-18 | nut 5/16-18 coarse thread finished hex nut grade 5 zinc 6000/ctn | 1675 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Brass | Plain | 3/8-16 | 3/8-16 nyl ins l/n ne type-efi brs | 97 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 1 1/4-7 x 2 1/2 | 1 1/4-7 x 2 1/2 hex c/s domestic gr8 zncyl | 2 |
|
| OneMonroe | MN | Gaskets | gasket | 25 |
| |||
| OneMonroe | MN | Self-Clinching Standoff | Plain | so-3.5m3-18zi standoff thru st metric 3.5m3 x 18mm | 20 |
| ||
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 13/16 x 1/16 | 11/16 x 13/16 x 1/16 buna o-ring 70 duro | 66 |
|
| OneMonroe | MN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | M60-115 x 22 | flap disc 60+ 115x22mm cubitron ii |
| ||
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 3/8 | 6 x 3/8 phillips pan sts a zp | 3256 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | M4-0.70 x 6 | m4-.7 x 6m button soc cap screw | 100 |
|
| OneMonroe | MN | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 3 | 1/2-13 x 3 hhc 18-8 ss | 7 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 3/4-10 x 1 3/4 | 3/4-10 x 1-3/4 shcs-kerr lakeside usa-plain | 15 |
|
| OneMonroe | MN | Service & Repair Kits (Bolt Packs) | Plastic | Plain | 1 7/16 | 1-7/16 bearing wide inner ring set screw locking 2-bolt flange plastic | 3 |
|
| OneMonroe | MN | Brackets & Supports | Aluminum | Plain | hndtrkalum50in stnd lp w/cmft slv strt frm18x9 nose10in pneu60in extergo str clmbrbrktube frm ext w/fm slvpull barergo kick bar | 1 |
| |
| OneMonroe | MN | Heat Shrink Tubing | 1 x 4 | 1 x 4 dual wall shrk tube-red | 1 |
| ||
| Alma Bolt | MI | Concrete/Masonry Screw (Tapcon, Titen etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 4 | 1/4 x 4 flat phillip #dfm3emm360 304 stainless st. tapper | 100 |
|
| Alma Bolt | MI | Electrical Wires & Cables | Plastic | Plain | 18 | 90018 pvc fuse holder w/12 wire 18ga to 5 amp wire | 95 |
|
| Alma Bolt | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 35 | m10 x 1.5 x 35 a2 st. st. button head socket c/s din 7380 | 222 |
|
| Optimas | IL | Flat Washer | Steel | Zinc/Yellow | .250 x .563 x .047 | .250 x .563 x .047 flat washer steel zinc yellow per drawing (p) | 500 |
|
| Optimas | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-18 x 1/4 | #8-18x1/4 ansi b18.6.4 phillips pan t/s type-ab 18-8 ss | 10000 |
|
| Empower H | IL | Wire Rope Clamps, U-Bolt Clamps | Iron | Galvanized | 26 | 260-0014 wire rope clipmalleable iron galvanized finishfor rope size 1/4 not to be used for overhead lifting | 5384 |
|
| Delta | TX | Hex Head Cap Screw | Steel | Plain | 7/8-9 x 2 1/4 | hvy hex c/s a325 plain 7/8-9x2 1/4 | 130 |
|
| IndexFast | CA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Phosphate | cage nut steel phosphate #10-32 d7951-1032-4 speed grip nut retainer 10-32 range .093-.126 black phosphate & oil | inquire |
| |
| AFT Faste | TX | Coiled Pin (Spiral Spring Pin) | Steel | Cadmium | .062 x .187 | .062x.187 spirol pin steel cad | 2750 |
|
| AFT Faste | TX | Metal Drill Bits | 3/8 | 3/8 pilot point drill bit | 120 |
| ||
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 8 | Plain | hex head cap screw grade 8 plain | 1 |
| |
| Coburn Myers Fastening Systems | PA | Machine Screw | Steel | Zinc/Clear | machine screw carbon steel zinc/clear | 885 |
| |
| Siena | IA | Hex Head Cap Screw | Grade 8 | Black Oxide | 1/4-20 x 3/4 | 1/4-20x3/4 hex head cap screw steel grade 8 black oxide | 204 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | 3/8-16 x 3 socket cap 18-8 stainless | 8 |
|
| FasSpcMfg | FL | Sockets | Duplex Stainless (2205, Ferralium etc.) | 5/16-18 x 1 | 5/16-18 x 1 socket set cup point duplex 2205 2a fit | 2 |
| |
| FasSpcMfg | FL | Socket Head Cap Screw | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 5/8-11 x 1 3/4 | 5/8-11 x 1-3/4 socket head cap screwni-cu 400 (monel) | 2 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 4 | 3/4-10 x 4 hex cap 304 stainless | 344 |
|
| FasSpcMfg | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 2 3/4 | 5/8-11 x 2-3/4 slotted flat head machine screw 303 stn | 2 |
|
| OneMonroe | MA | Hex Jam Nut | Steel | Zinc/Clear | M10-1.5-1.50 | m10-1.5 hex nut thin stl z nyl std pat din 439b | 2000 |
|
| OneMonroe | MA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #6 x 1 | #6 x 1 5/8 phil. trim hd. tek | 55 |
|
| OneMonroe | MA | Flat Head Socket Cap Screw | Steel | Black Oxide | #2-56 x 1/4 | 2-56x1/4 hex flat socket hd cap screw alloy stl black oxide | 2000 |
|
| OneMonroe | MA | Set Screw (Socket Head) | Steel | Plain | 1.6 x 3 | 1.6 x 3m soc set-cup pt | 54 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Painted | #6 x 1/2 | #6 x 1/2 phillips pan s/m/s-white-painted heads plate | 1250 |
|
| OneMonroe | MA | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 3/8-16 x 3 | 3/8-16 x 3 black oxide alloy steel cup point socket set screw | 1000 |
|
| OneMonroe | MA | Set Screw (Square Head) | Steel | Plain | 3/4-10 x 5 | 3/4-10 x 5 sq hd set screw | 125 |
|
| OneMonroe | MA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3 | thread-forming screws for thin plastic zinc-plated steel m3 size 8 mm long | 25 |
|
| Irwin Ind | Ont | Sems Machine Screw | Steel | Zinc/Clear | #4-40 x 3/8 | 4-40x3/8 hex slotted sq cone sems m/s trivalent zinc b18.13 | 5000 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 2 | Plain | 5/8-11 x 22 | 5/8-11 x 22 hex cap screw gr 2 plai | 65 |
|
| Raw Produ | NJ | Machine Screw | 316, 317, A4 Stainless | Plain | #10-32 x 1/4 | phillips pan head ms 316 ss #10-32 x 1/4 | 9247 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 1 | slotted round head sms 18-8ss #12 x 1 | 60 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 5/8-11 x 8 | hex cap screws grade 2 zinc 5/8-11 x 8 | 120 |
|
| Raw Produ | NJ | Flat Washer | Steel | Plain | #12 x 1 1/2 | metalgrip sell driller roofing t3 screws w/o washer-forest green-#12 x 1-1/2 | 500 |
|
| Raw Produ | NJ | Carriage Bolt | Steel | Zinc/Clear | 5/8-11 x 2 1/2 | carriage bolts zinc 5/8-11 x 2-1/2 ft | 321 |
|
| Raw Produ | NJ | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 3/16 x 2 3/4 | hex washer head tapcon 3/16 x 2-3/4 | 87449 |
|
| Raw Produ | NJ | Eye Bolt | Steel | Plain | 2.5-4 x 5 | eye bolts shld-hdg 2.5-4 x 5 | 200 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | torx tp flat head ms 304 ss 1/4-20 x 1 (t-27) | 1158 |
|
| Raw Produ | NJ | Machine Screw | Silicon Bronze | Plain | 3/8-16 x 3/4 | slotted flat head ms silicon bronze 3/8-16 x 3/4 | 336 |
|
| Raw Produ | NJ | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 1/2-13 x 2 | hex tap bolts grade 5 zinc 1/2-13 x 2 | 500 |
|
| Raw Produ | NJ | Cushioned Pipe & Tube Loop Clamp | 316, 317, A4 Stainless | 4 | pipe clamps 316 ss 4 | 175 |
| |
| AEROSPCE | MN | fhs-440-16 pem 1long(flush-head)self-clinching | 8020 |
| ||||
| F. Solutions | OH | Solid Rivet | Steel | Zinc/Clear | 3/16 x 3/8 | solid flat head rivet 3/16x3/8 steel zinc plated | 100 |
|
| National | Ont | D-Rings | Steel | Nickel Plated | 5/5 x 7/16 x 120 | 5/5x7/16x120 d-ring stl nickel | 400 |
|
| National | Ont | Button Head Socket Cap Screw | Steel | Plain | 5/16-18 x 1 1/2 | 5/16-18x1-1/2 butt skt cap s | 1000 |
|
| Mansco | MI | rockwood 470 (3) door stop satin chrome w/fastener pack | 29 |
| ||||
| Mansco | MI | Self-Clinching Stud | Steel | Zinc/Clear | 1/4-20 x 3/8 self clinching stud triv znc ch-0420-6 | 1000 |
| |
| Mansco | MI | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x .126-.250 grip prot dome hd s.s./s.s. blind rivet 200-14946 | 2100 |
| |
| Mansco | MI | Hinges | t-type 110 hinge 9mm ( 702.0ck1.054 )) | 94 |
| |||
| Mansco | MI | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | m12-1.25 x 50mm hex cap cl8.8 triv znc f/t | 265 |
| |
| Mansco | MI | USS Flat Washer | Steel | Plain | 1/2-.557 | 1/2 uss f/w pln-.557/.599 idx1.368/1.405 odx.086/.132 thk | 1 |
|
| AFI | FL | Self-Clinching Stud | Steel | Plain | flush-head self-clinching stud () | 3205 |
| |
| AFI | FL | stopper () | 2000 |
| ||||
| AFI | FL | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | pem self-clinching blind fastener () | 13580 |
| |
| Mansco | MI | Tension Control Bolt (F3125 Gr. F1852, F2280) | ASTM A563 Grade DH | Plain | 3/4-10 x 3 3/4 | dome type-1 tc bolt gr f1852 f436 f/w & a563 gr-dh nut usa | 200 |
|
| Mansco | MI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | m4-0.7 x 12mm flat 6-lobe t-20 trilobe metal tf scr triv znc & wax wax | 20670 |
| |
| Mansco | MI | Machine Taps | 5/8-11 | flute plug tap 3/box | 9 |
| ||
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #9-15 x 1 1/2 | #9-15 x 1-1/2 self-piercing screws, 1/4 tall indented hex washer head unslotted, fillet under head, assembled galv sealing washer, twin lead, full thread, sharp point, steel cer silver 1000hr, head painted amp cocoa brown | 1,000 |
|
| SPC | TX | Lock Nut, Nylon Insert | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 1 3/4-5 | 1 3/4-5 nu nylon insert lock nut monel greer 09nu-2805 | 3 |
|
| SPC | TX | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/8-24 | 3/8-24 nte nylon insert locknut steel zinc (NILN ) | 70000 |
|
| Scrooscoop | CA | Blind Rivet | Aluminum | Painted | 1/8 | #43 blind open type rivet alum rivet alum mandrel painted white button head diamond point grip range (.126-.187) diameter 1/8 length .337 | 6,000 |
|
| F. Solutions | OH | Heavy Hex Jam Nut | Grade 8M | Plain | 1 1/4-7 | heavy hex jam nut 1-1/4-7 sa194 grade 8m | 1 |
|
| Komar | IL | Dowel Pin | Steel | Plain | 1/8 x 1 1/2 | 1/8x1 1/2 dowel pin | 100 |
|
| Stelfast | OH | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20x1/2 slot fillister hd mach scr zp | inquire |
|
| BHAM | AL | Protective Caps & Plugs | Rubber, Buna-N, Neoprene etc. | Plain | 0.156 x 1.00 | 0.156x1.00 silicone rubber src cap | 94 |
|
| Packer Fastener | WI | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 3/4-10 x 4 1/4 | b7 heavy hex head bolt AN370 | 3091 |
|
| FDL | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #4-24 x 5/8 | 4-24 x 5/8 (#1) square driver flat head w/beefed up shoulder under head type-a sms w/17 slot point c1022 steel case hard zinc plated baked per print whs22000 dated 2-9-15 (added note 7-15-15 .047 r. max) 30,000ps/ctn & 18.54kgs/ctn b18.6.4 | 992000 |
|
| THRDFAST | AL | Button Head Socket Cap Screw | Steel | Plain | 1/4 | nf-28x1 3/4 button soc c/s b18.3 | 75 |
|
| THRDFAST | AL | Hex Head Cap Screw | Class 8.8 | Plain | M3-0.50 x 25 | hex c/s | 259 |
|
| THRDFAST | MS | Eye Bolt | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 | 3/4-10x8 forged eye bolt teflon blue (no shoulder) | 5 |
|
| THRDFAST | AL | Threaded Rod | Brass | Plain | M18-2.50 x 1 | meter a/t rod | 1 |
|
| THRDFAST | AL | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 | 3/8x1 ss roll pin (magnetic) b18.8.2 | 17 |
|
| THRDFAST | MS | Nails | Steel | Galvanized | #10 | common nail hdg | 35 |
|
| THRDFAST | AL | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 3/4 x 3 (5/8-11) | socket sh/b b18.3 | 45 |
|
| Eurolink | SC | Cap Nut (Acorn Nut) | Brass | Plain | M10 | m10 din 1587 brass acorn nut high type | 100 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Plain | 2-8 x 15 1/4 | 2-8x15-1/4 astm a320 l7 all thread stud | 733 |
|
| Lightning | LA | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 | socket c/s 316 ss | 14 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
