FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Slotted Spring Pin (Roll Pin) | Plain | 3/16 x 1 | 3/16x1 roll pin | 69 |
| ||
| Shadran I | Slotted Spring Pin (Roll Pin) | Plain | 7/32 x 1 1/4 | 7/32x1-1/4 roll pin | 5 |
| ||
| Shadran I | Slotted Spring Pin (Roll Pin) | Plain | 5/16 x 1 3/4 | 5/16x1-3/4 roll pin | 5 |
| ||
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12-1.75 x 25 | m12 x 1.75 x 25 mm 10.9 metric hex cap screw fully threaded yellow zinc | 837 |
|
| OneMonroe | NC | Button Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 3/4 | 3/8-16 x 1-3/4 button head socket cap screw steel plain usa | 25 |
|
| OneMonroe | NC | Button Head Socket Cap Screw | Steel | Plain | 3/8-16 x 2 | 3/8-16 x 2 button head socket cap screw steel plain usa | 25 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 5/16-18 x 2 3/4 | fhscs 5/16-18 x 2 3/4 | 22 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 1/2 | fhscs 3/8-16 x 1 1/2 | 50 |
|
| OneMonroe | NC | U-Bolt | Steel | Zinc/Clear | 5/8 | 4l sz v-bolt pulley 2.25 5/8 | 32 |
|
| OneMonroe | NC | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | M4 | 4mm rubber well nut | 1 |
|
| OneMonroe | NC | Round Bar | Steel | 1 1/8 | glide 1-1/8 round tubular cush steel | 73 |
| |
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12-1.75 x 30 | m12 x 1.75 x 30 mm 10.9 metri hex cap screw fully threaded yellow zinc | 32 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 6 x 2.5 | 6x2.5 swivel caster #2771t23 | 20 |
| ||
| OneMonroe | NC | Hole Saws | Steel | 13/16 x 1/8 | 13/16 x 1/8 carbide tipped hole saw champion | 4 |
| |
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 2 7/16 x 4 15/16 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 12 x 3 rig mat steel finish zinc top plate sz 5 x 6-1/4 bolt hole ptrn 2-7/16 x 4-15/16 slotted to 3-3/8 x 5-1/4 load cap 2000 lbs | 2 |
|
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | Steel | Zinc/Clear | dzus lion quarter-turn stud medium size wing steel zinc plate bright chromate | 31 |
| |
| OneMonroe | NC | Rivet Screw (Rivscrew etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | dzus lion quarter-turn receptacle medium size rivet/screw (thru hole) steel zinc immersion coating | 79 |
| |
| OneMonroe | NC | Flat Washer | Nylon (Polyamide) | Plain | nylon wear washer | 50 |
| |
| OneMonroe | NC | External Type E Retaining Ring (E-Clip) | Steel | Plain | receptacle clip | 50 |
| |
| OneMonroe | NC | Tubing | glideswivel1-1/16 basefor square tube fits tubing id .955-1.027 | 16 |
| |||
| OneMonroe | NC | Saw Blades | Steel | bracketangle2 mnting holes6mm blade | 5 |
| ||
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | enclosed power clamp | 2 |
| |||
| OneMonroe | NC | Socket Head Cap Screw | Steel | Black Oxide | #8-32 x 1/2 | #8-32 x 1/2 black oxide alloy steel socket cap screw-with nylon patch | 6000 |
|
| OneMonroe | NC | Protective Caps & Plugs | 4 x 1 1/4 | polyurethane tread mechanically locked to a polyolefin core. 4 x 1-1/4 bearing bore 5/16 sealed ball bearing 250 lbs. capacity | 52 |
| ||
| OneMonroe | NC | Self-Sealing Screw | Steel | Plain | flexible trim with seal | 190 |
| |
| OneMonroe | NC | Hinges | 1 1/2 x 1 3/8 | 1-1/2 x 1-3/8 butt hinge | 1 |
| ||
| OneMonroe | NC | Flat Washer | Steel | Plain | washer | 10 |
| |
| OneMonroe | NC | Knobs & Star Grips | inside release knob | 8 |
| |||
| OneMonroe | NC | Hook Screw, Cup Hook | Steel | Plain | 3 | 3 screw hooks | 20 |
|
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | Steel | Zinc/Clear | dzus lion quarter-turn stud large size slotted recess steel zinc plate bright chromate | 152 |
| |
| OneMonroe | NC | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Zinc/Clear | dzus lion quarter-turn stud large size tamper-resistant head steel zinc plate bright chromate | 268 |
| |
| OneMonroe | NC | Socket Head Cap Screw | Steel | Plain | 7/8-9 x 2 1/2 | 7/8-9 x 2 1/2 socket cap screw | 18 |
|
| Century | FL | Flat Washer | Plain | smalley whr-175-pa-s02-z per mil-dtl-27426/3 and as3217 | 1500 |
| ||
| Olander | CA | Machine Screw | Steel | Zinc/Clear | M2-0.40 x 12 | M2-.4x12 phillips pan stl zn cr3 () | 2273 |
|
| Olander | CA | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Clear | 3/16 x 1 1/2 dowel pin 416 sst rohs | 200 |
| |
| Olander | CA | Hose Clamp | catamount gator grip hose clamps | 24 |
| |||
| Olander | CA | Flat Washer | Steel | Plain | saddle wash for raf 4798-s () () | 2907 |
| |
| Olander | CA | Sems Machine Screw | Steel | Plain | #6-32 x 3/8 | 6-32 x 3/8 ph pan hd sq cone sems ccp () () | 100 |
|
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 1/16 | 1-72 x 1/16 soc set flat pt sst rohs () () | 192 |
|
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 soc set full dog pt sst | 19 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | 1/4-28 x 3/4 but soc alloy | 75 |
| |
| Olander | CA | Flat Washer | Nylon (Polyamide) | Plain | raf nyl f/w .375-.125-.125 () () | 804 |
| |
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | #10-32 x 1/2 shcs w/long-lok 300 series s/s | 43 |
|
| GLF | OH | Hand Taps | #10-32 | #10-32 nitro taper hand tap | 22 |
| ||
| GLF | OH | USS Flat Washer | 316, 317, A4 Stainless | Plain | 1/4 | 1/4 uss flat washer 316 s/s | 1554 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 4 | 5/8-11 x 4 f/t stud b-7 stl teflon | 42 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 45 | m16-2 x 45 hhcs cl 8.8 stl zc din 933 | 469 |
|
| GLF | OH | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M5-0.80 x 12 | m5-0.8 x 12 shcs cl 12.9 stl zc zn 912 | 131 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | ASTM A574 | Plain | 1/2-20 x 2 1/2 | 1/2-20 x 2 1/2 soc set knurled pt alloy | 3 |
|
| Brikksen | FL | Electrical Lugs & Terminals | 16-14 | 20172 16-14 butt connector blue heat | 6958 |
| ||
| Hayes | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 1 1/2 | #6 x 1 1/2 slotted oval a/ab 18-8ss | 400 |
|
| Brikksen | FL | Lag Screw | Plain | 3/8 x 1 1/2 | 3/8 x 1-1/2 hex lag screw asme b18.2.1 | -959 |
| |
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 3/4 | #10 x 3/4 slotted oval a/ab 18-8ss | 400 |
|
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 2 | #8 x 2 slotted pan a/ab 18-8ss | 200 |
|
| Hayes | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/2 | #10 x 1 1/2 slotted flat a/ab 18-8ss | 300 |
|
| Brikksen | Flat Head Socket Cap Screw | ASTM A574 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #10-32 x 1/2 | 10-32 x 1/2 flat 82 degree countersink head hex socket cap screw asme b18.3 alloy steel zinc clear trivalent + fluoropolymer black coated | head hex socket cap screw asme b18.3 alloy steel zinc clear trivalent + fluoropolymer black coated | head hex socket cap screw asme b18.3 alloy steel zinc clear trivalent + fluoropolymer black coated | 473 |
| |
| Brikksen | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 1/2 | 3/8-16 x 2-1/2 flat 82 degree countersink head hex socket cap screw asme b18.3 fully threaded 18.8 stainless steel | countersink head hex socket cap screw asme b18.3 fully threaded 18.8 stainless steel | countersink head hex socket cap screw asme b18.3 fully threaded 18.8 stainless steel | 50 |
| |
| Brikksen | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #10-24 x 3/4 | 10-24 x 3/4 flat 82 degree countersink head hex socket cap screw asme b18.3 316 stainless steel | head hex socket cap screw asme b18.3 316 stainless steel | head hex socket cap screw asme b18.3 316 stainless steel | 6500 |
| |
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 5 | 7/16-20 x 5 hcs zy8 | 76 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-14 x 6 | 7/16-14 x 6 hcs zy8 | 404 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 6 | 7/16-20 x 6 hcs zy8 | 115 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 6 1/2 | 7/16-20 x 6 1/2 hcs zy8 | 125 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 1/2-20 x 1 | 1/2-20 x 1 hcs zy8 | 1681 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 1/2-13 x 1 1/2 | 1/2-13 x 1 1/2 hcs zy8 | 72945 |
|
| Bossard | AZ | expander mb600-040 sfc koenig | 8 |
| ||||
| Bossard | AZ | Self-Clinching Standoff | Steel | Zinc/Clear | blind standoff steel zinc penn engineering | 42230 |
| |
| Centennia | CO | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | 7/8-9 x 6 1/2 | 7/8-9 x 6 1/2 a325 bolt only-dom hdg | 6 |
| |
| Centennia | CO | Socket Head Cap Screw | null | Plain | M5-0.80 x 10 | m5-.8 x 10 soc cap screw 12.9 alloy | 100 |
|
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-16 x 3 | #10-16x3 ph modf trus full thread sds #3 point stainless steel self-drilling screws | 10000 |
|
| Kanebridge | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | #10-24x1 3 wing pan secur m/s 18-8 stainless steel machine screws | 20000 |
|
| CIF | IL | Socket Head Cap Screw | Class 6.8 | Zinc/Clear | M10-1.50 x 20 | m10 x 1.5 x 20 socket head cap screw knurled head 12.9 zinc plated per mpaps g-20 class 6a and baked for 8 hours @ 400 f 1 hour after plating | 85371 |
|
| SWACO | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/4-20 x 3/4 | ms16996-23 304ss | 19 |
|
| SWACO | OH | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M5-0.80 x 60 | m5-0.80 x 60 shcs stl 12.9 zi | 101 |
|
| SWACO | OH | Self-Clinching Standoff | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #4-40 x .375 | bso4-6440-12 pem standoff | 750 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3/8-16 x 1d | 3/8-16 x 1d heli-coil | 70 |
| |
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 | 7/16-14x1 hhcs gr5 zp | 1191 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M4-0.70 x 25 | m4-0.70x25 hhcs cl8.8 zp | 84 |
|
| Accutite | CA | Machine Screw | Steel | Zinc/Clear | #4-40 x 1 5/8 | 4-40 x 1-5/8 phillips pan m/s stl zinc rohs compliant | 392070 |
|
| Accutite | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Nickel Plated | 3 x 1/2 | 3 x 1/2 phillips truss type-ab steel nickel | 5500 |
|
| Accutite | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 | m2 hex nut metric s/s din 934-a2a2 | 12082 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | 31 | huck 509196 controller complete ( # 31 ) | 2 |
| |
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 114540 spindle 352 t&p | 10 |
| ||
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 1/4-20 x 2 | 1/4-20 x 2 gr.8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Plain | 1/2-13 x 4 1/2 | 1/2-13x4-1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M10-1.50 x 40 | M10-1.5x40 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| Field Fas | IL | Blind Rivet | Plain | rivet blind (fbf-52) | 6725 |
| ||
| Field Fas | IL | Round Female/Female Standoff | Plain | spacer | 9 |
| ||
| OneMonroe | MN | Hinges | 4 x 4 | 4 x 4 butt hinge | 4 |
| ||
| OneMonroe | MN | Metal Drill Bits | Steel | 23/64 | 23/64 kobalt screw machine drill | 3 |
| |
| OneMonroe | MN | Machine Screw | Steel | Zinc/Yellow | #6-32 x 1 | 6-32 x 1 slotted zy | 300 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 8-32 x 3/8 sl hwh ms zp | 100 |
|
| OneMonroe | MN | Flat Washer | Plain | striker stud & washer | 48 |
| ||
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 1/16 x 7/8 | 1/16 x 7/8 rollpin plated | 90 |
|
| OneMonroe | MN | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | left hand spherical rod end | 4 |
| ||
| MWRAF | CT | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | raf electronics part m40x344mc brass insert-mc series | 21130 |
| |
| OneMonroe | MN | Eye Bolt | Steel | Plain | eyebolt | 28 |
| |
| OneMonroe | MN | Sems Machine Screw | Steel | Zinc/Clear | M4 x 8 | screw square cone sems m4 x 8mm pan/phillips steel/clear zinc | 1100 |
|
| OneMonroe | MN | Service & Repair Kits | 8 | doorstop replacement tip kit sold 8 per pack | 17 |
| ||
| OneMonroe | MN | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 x 35 | m8 x 35mm weld stud ss | 28 |
|
| OneMonroe | MN | Shim Washer (Round, Slotted, Square etc.) | Steel | Plain | M25 x 36 x 1 | 25mmx36mmx1mm steel shim | 1347 |
|
| OneMonroe | MN | Hinges | Brass | 3/4 | 3/4 broad hinge-each solid brass | 80 |
| |
| OneMonroe | MN | Carriage Bolt | Steel | Zinc/Clear | 1/4 x 1 3/4 | 1/4 x 1 3/4 cge bolt zp | 580 |
|
| OneMonroe | MN | Hole Saws | Steel | lenox 3-3/8in bi-metal hole saw | 1 |
| ||
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Brass | Plain | #10-24 x 2 1/2 | 10-24 x 2 1/2 all thread stud brass | 77 |
|
| OneMonroe | MN | Hex Female/Female Standoff | Aluminum | Plain | 6-32 x .812 1/4 | 6-32x.812 1/4in hex f/f standoff alum | 216 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | 8-32 x 5/16 phillips truss m/s stainless | 200 |
|
| OneMonroe | MN | Heavy Hex Structural Bolt (A325, A490, 10.9) | Cadmium | 1/2 x 1 1/4 | 1/2 x 1 1/4 a325 hhb cad | 1 |
| |
| OneMonroe | MN | Set Screw (Socket Head) | Plain | 5/8-18 x 1/2 | 5/8-18 x 1/2 skt. hd set screw-cup pt | 172 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 1/2 | 1/2 x 1/2 gr5 hhc zp | 435 |
|
| OneMonroe | MN | CD Weld Stud | Steel | Plain | M4 x 35 | m4 x 35mm flanged cd stud steel | 490 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 soc c/s lnglk efi stl | 54 |
|
| OneMonroe | MN | Shim Washer (Round, Slotted, Square etc.) | Steel | Zinc/Clear | 2 x 4 | 2 x 4 shim-zinc plated | 33 |
|
| OneMonroe | MN | Flat Washer | Plain | 1.06 x 2.00 x .250 | 1.06 id x 2.00 od x.250 thk 4140 fw bhn 320/360 | 60 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain | 5/16-18 x 6 | 5/16-18 x 6 grade 8 alloy hex cap screw | 287 |
|
| Alma Bolt | MI | Machine Dies | Steel | 9/16-12 | 9/16-12 (2 od) round adjustable die hss | 2 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Plain | 3/4-10 x 4 1/4 | 3/4-10 x 4 1/4 grade 5 hex head cap screw | 120 |
|
| Alma Bolt | MI | Carriage Bolt | Steel | Plain | #10-24 x 2 | #10-24 x 2 carriage bolt | 2400 |
|
| Alma Bolt | MI | Finished Hex Nut | Grade 8 | Plain | 5/8-18 | 5/8-18 sae grade 8 finished hex nut plain | 451 |
|
| Alma Bolt | MI | Metal Drill Bits | Steel | 9/32 | 9/32 solid carbide lh spiral down cut drill bit | 6 |
| |
| Alma Bolt | MI | Propell Nut (Hurricane Nut) | Steel | Zinc/Clear | 5/16-18 | 5/16-18 propell nut zinc 7/8 flange 3/8 barrell | 1892 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1.000 asme b18.2.1 hex cap screw gr 5 zinc triv rohs pack of 100 | 278 |
|
| Optimas | IL | Blind Rivet | Aluminum | Plain | 3/16 (.313-.500) | 3/16 x .252/.504 grip large flange blind rivet aluminum/steel mandrel (i) ad66-68bslf | 4182 |
|
| Optimas | IL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M8-1.25 x 50 | m8x1.25 x 50mm socket cap screw a4 ss din 912 | 1530 |
|
| Optimas | IL | Electrical Switches | Rubber, Buna-N, Neoprene etc. | Plain | push button switch seal hex base black silicone | 1098 |
| |
| Optimas | IL | Hex Male/Female Standoff | Brass | Nickel Plated | M3 x 0.5 x 20 | m3x0.5 x 20 (5mm hex) m/f standoff brass nickel 28 oal | 1055 |
|
| Hybroco S | MI | Electrical Lugs & Terminals | 3 1/16 | 5rw 3-1/16 o.a.l. 3/8 face 1/2 offset bent spade | 5 |
| ||
| Coburn Myers Fastening Systems | PA | Plow Bolt, Scraper Blade Bolt | Grade 5 | Plain | plow bolt scraper blade bolt grade 5 plain | 300 |
| |
| Siena | IA | Socket Head Cap Screw | Grade 8 | Black Oxide | 1/2-13 x 1 1/2 | 1/2-13x1-1/2 socket head cap screw steel grade 8 black oxide asme b18.3 | 46 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 1/2-13 x 5 | 1/2-13 x 5 socket cap alloy 2-1/4 thread | 2 |
|
| FasSpcMfg | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #10-24 x 1/2 | 10-24 x 1/2 slotted fillister head machine screw 316 stainless | 4 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 3/8-16 x 1/4 | 3/8-16 x 1/4 socket set cup point 316 stainless | 11 |
| |
| FasSpcMfg | FL | Sockets | 400 Stainless (405, 410,416,420,430 etc.) | 1/2-13 x 1 | 1/2-13 x 1 socket set knurled point 416 stainless rc 35 minimum brite hard | 2 |
| |
| OneMonroe | MA | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #0 x 1/4 | #0 x 1/4 round head type-u zinc plated drive screw | 30000 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-20 x 2 3/4 | 7/16-20 x 2 3/4 hex cap screw gr 8 yellow zn | 269 |
|
| OneMonroe | MA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 18-8 stainless steel socket cap screw | 23 |
|
| OneMonroe | MA | Socket Head Cap Screw | Class 12.9 | Plain | M8-1.25-1.25 x 25 | m8-1.25 x 25 socket cap screw cl12.9 black | 84 |
|
| OneMonroe | MA | Carriage Bolt | Steel | Zinc/Clear | 5/16-18 x 1 1/4 | 5/16-18 x 1-1/4 carriage bolt steel/zinc | 4968 |
|
| Scheinert | NJ | Joint Connector Bolt, JCB, Draw-Bolt, Assembly Bolt | Steel | Black Oxide | 1/4-20 x 70MM | 1/4-20x70mm joint conn bolt 13mm hd diameter black oxide & patched | 14956 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 8 | metric phillips flat head ms a2 ss m4 x 8m | 8264 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8-18 x 3 | phillips flat head sms zinc type-ab #8-18 x 3 | 946 |
|
| Raw Produ | NJ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 2d | heli-coil threaded inserts 303 ss 3/8-24 x 2d 31020 | 142 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 9/16-18 x 1 1/4 | socket cap screws 316 ss 9/16-18 x 1-1/4 | 50 |
|
| Raw Produ | NJ | Wood Screw | Brass | Plain | #10 x 1 1/4 | brass phillips flat head wood screws #10 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Cable Clamps & Ties | Nylon (Polyamide) | 6 | nylon peel off cable ties 6 red-n6-rd | 577 |
| |
| Raw Produ | NJ | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 1/2 | phillips flat head ms 316 ss 3/8-16 x 2-1/2 | 350 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #14 x 2 | phillips flat head sms 316 ss #14 x 2 | 1271 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | #4-40 x 1/8 | socket set screw 316 ss #4-40 x 1/8 | 1651 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #10-24 x 3/4 | button head socket cap screws 316 ss #10-24 x 3/4 | 207 |
|
| Raw Produ | NJ | Eye Nut / Lifting Eye Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-9 | eye nuts style b 304 ss 7/8-9 en-9-hd-ss | 200 |
|
| Raw Produ | NJ | Threaded Rod | Steel | Galvanized | 1 3/4-5 x 3 | threaded rod hdg 1-3/4-5 x 3ft | 500 |
|
| Raw Produ | NJ | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 5/16 x 2 | cotter pins extended prong square cut zinc cr+3 5/16 x2 | 374 |
|
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 | m4x0.7 tangless free running 304sst insert | 6813 |
|
| AEROSPCE | MN | so-832-4zi pem .125longref#nas1129-08-4z thru-hole | 2950 |
| ||||
| AEROSPCE | MN | Thumb Screw (Plain) | Steel | Plain | 12-13-305-11 southco knurl head screw cs | 5 |
| |
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain | M8 (.188-.250) | tps-4mm-8 pop rivet 8mm long(flush-head)4mm dia pilotpin tps-4mm-8 | 25 |
|
| AEROSPCE | MN | fh-0420-12zi pem .750long(flush-head)self-clinching | 30000 |
| ||||
| AEROSPCE | MN | fhs-m4-8 pem 8mm long(flush-head)self-clinching | 3000 |
| ||||
| F. Solutions | OH | Hex Head Cap Screw | Grade 5 | Galvanized | hex head cap screw 3/8-16 x 1 sae j429 gr5 hdg | 50 |
| |
| National | Ont | Finished Hex Nut | Steel | Zinc/Clear | #8-32 | 8-32 hex nut sz | 160000 |
|
| National | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 45 | m5x45 hex skt cs ss din 912 | 1783 |
|
| National | Ont | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | M6-1.60 | m6 x 1.0 u-nut | 23000 |
|
| Mansco | MI | Hook & Loop Products (Velcro, Teccro, etc.) | Black Oxide | 1 x 50 yd (1800) velcro loop black sew on (w/o psa) | 21600 |
| ||
| Mansco | MI | Protective Caps & Plugs | Plastic | 3/8 | threaded cap plug red p-38b | 766 |
| |
| AFI | FL | Thumb Screw (Shoulder) | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20x1 thumb screw type-a st zn () | 1200 |
|
| AFI | FL | Binding Post & Screw Set (Camtainer Bolt & Nut set, Sex Bolt) | Steel | Plain | 3/8 | 3/8 screw for binder post () | 4000 |
|
| AFI | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 5/8 | 1/4-20x5/8 flat hd soc cs ss () () | 3136 |
|
| AFI | FL | .094odx.016diax.197l s/s spring () | 7006 |
| ||||
| AFI | FL | gm plug 14-4006 () | 2000 |
| ||||
| AFI | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 5/8 | 5/16-18x5/8 button soc hd cs ss () () | 8000 |
|
| AFI | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .125 x .281 x .040 | .125 x .281 x .040 flat round washer ss () | 36315 |
|
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x .190 | 10-24x.190 ss in heli-coilininsertinternal/locking heli-coil 3585-3cn-0190 | 1200 |
|
| Mansco | MI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5.50mm id x 13.00mm od x 1.00mm thk f/w 304 s.s. | 21000 |
| |
| Buckeye | OH | Weld Pin | Copper | Plain | 10ga x 1-1/4 cd pin w/blunt end steel copper flsh | 1900 |
| |
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 316, 317, A4 Stainless | Plain | 3/4-10 | 3/4-10 light hex full height flexslot 316 stainless military | 280 |
|
| IRF | NC | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 | 6-32x1 socket hd cap screw 18-8 ss | 2,000 |
|
| Stelfast | OH | Coupling Nut | Steel | Galvanized | 1-8 x 1 3/8 x 2 3/4 | 1-8x1-3/8x2-3/4l hex coupling nut hdg/tos 0.024 | inquire |
|
| Parker | AZ | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | 1/4-20 x 2.00 | 1/4-20 x 2.00 socket head cap screw 1.00 thread ff-s-86e w/am #4 a286 s/s passivate per ff-s-86e NAS1352N4-32 made in u.s.a. | 4275 |
|
| Arden | WI | Castle Nut (Hex) | Steel | Black Oxide | 3824 hex castle nut blk | inquire |
| |
| Arden | WI | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Clear | 1 x 5/16 | 1420x5/16 phillips round ms zc | inquire |
|
| Arden | WI | Wood Screw | Steel | Zinc/Clear | #8-15 x 1 | #8-15x1 wood screw zc | inquire |
|
| Arden | WI | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/4 | 832x3/4 slotted fil ms zc | inquire |
|
| Arden | WI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 3/4 | 832x3/4 phillips truss type-23 zc | inquire |
|
| BHAM | TX | Wood Screw | Steel | Plain | #12-14 x 3/4 | #12-14x3/4 hwh woodscrew t17 ww b18.6.1 | 5000 |
|
| THRDFAST | FL | Hex Head Cap Screw | Grade 8 | Plain | 1 1/8-7 x 4 1/2 | gr8 hex c/s b18.2.1 | 10 |
|
| THRDFAST | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 3/4-10 x 2 1/2 | a325 type-1 str/b w/nut b18.2.1 b18.2.6 | 64 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Plain | 1 1/8-8 x 15 1/2 | 1-1/8-8x15-1/2 astm a320 l7 all thread stud | 571 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 3/8-16 x 3 1/2 | astm a193 b7m all thread stud | 62 |
|
| Lightning | LA | Wedge Stud Anchor | Steel | Galvanized | 3/4-10 x 10 | wedge anchor hot dipped | 36 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/8-7 x 5 3/4 | 1-1/8-7x5-3/4 astm a193 b7 heavy h/b 7 unc teflon blue | 684 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 3/8-8 x 9 | astm a193 b7 all thread stud | 148.6 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
