FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Toggle Bolt with Wings, Spring Toggle Anchor | Steel | Plain | 5/16 x 3 | 5/16 x 3 round head toggle bolt pkg qty 25 carton 5 | 50 |
|
| OneMonroe | NC | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 5/16 x 3 | 5/16 x 3 cotter pin plated | 38 |
|
| OneMonroe | NC | Barbed Fittings | Brass | 5/16 x 1/4 | 5/16 x 1/4 push-on hose barb x fem. pipe brass | 9 |
| |
| Jackson | MS | Beveled Washer (Round & Square) | Steel | Plain | 3/4 | bevel | 548 |
|
| Jackson | MS | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 7/8 | internal tooth l/w | 1723 |
|
| OneMonroe | NC | Metal Drill Bits | Steel | 5/16 | 5/16 jobber drill le ft hand | 4 |
| |
| OneMonroe | NC | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/16 | 5/16 h.s. multi flute d.e. end mill | 3 |
| |
| OneMonroe | NC | Dowel Pin | Steel | Plain | 5/16 x 7/8 | 5/16 x 7/8 dowel pin | 82 |
|
| RePneu To | MI | Sockets | 3/8 | 3/8 drive x 7/16 shallow 6-point impact socket | 20 |
| ||
| OneMonroe | NC | Compression Fittings | Brass | 5/16 | 5/16 compression sleeve brass | 38 |
| |
| Jackson | MS | Hex Jam Nut | Brass | Plain | 7/16-20 | nc jam hex nut | 444 |
|
| OneMonroe | NC | Compression Fittings | Brass | 5/16 | 5/16 compression 90 brass | 10 |
| |
| OneMonroe | NC | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 washer type-b regular stainless | 80 |
|
| OneMonroe | NC | SAE Flat Washer | Steel | Plain | 5/16 | 5/16 sae flat washer packaged | 10000 |
|
| OneMonroe | NC | SAE Flat Washer | 316, 317, A4 Stainless | Plain | 5/16 | 5/16 sae flat washer 316 stainless | 100 |
|
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | swivel yoke | 37 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 2 1/2 x 3 5/8 | caster swivel-plate dual wheel wheel sz 2-1/2 x 7/8 wheel mat hard rubber bearing ball top plate size 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 2-7/8 slotted to 3 load ht 3-3/4 load cap 330 lbs temp rt-20 to +140 f | 31 |
|
| OneMonroe | NC | Handles | l handle-key ch751 | 8 |
| |||
| OneMonroe | NC | Handles | handle | 12 |
| |||
| OneMonroe | NC | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-14 x 1 1/2 | flat phillips tek 12-14 x 1 1/2 zinc | 1750 |
|
| OneMonroe | NC | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | #12-14 x 2 | #12-14 x 2 hex washerhd w/bondsealwasher teks 3 self drilling screw climaseal plated | 250 |
|
| OneMonroe | NC | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/4-14 x 3/4 | 1/4-14 x 3/4 hex washerhd 7/16 drive teks 3 self drilling screw climaseal | 2000 |
|
| OneMonroe | NC | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10-16 x 1 | #10-16 x 1 6-lobe wafer head self drilling screw #3 point zinc (t25 drive) | 43 |
|
| OneMonroe | NC | Handles | 1/2 | padlockable handle 1/2 shank | 2 |
| ||
| OneMonroe | NC | Drywall Screw | Steel | Phosphate | #8-18 x 2 1/2 | #8-18 x 2-1/2 phillips bugle head fine thread drywall screw black phosphate | 2400 |
|
| OneMonroe | NC | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #0 x 1/4 | #0 x 1/4 round head type-u zinc plated drive screw | 29988 |
|
| OneMonroe | NC | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #2 x 3/16 | #2 x 3/16 round head type-u zinc plated drive screw | 358 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | bearing tprn rlr 125mmx70mm | 2 |
| ||
| OneMonroe | NC | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #8 x 1/2 | #8 x 1/2 round head type-u zinc plated drive screw | 500 |
|
| OneMonroe | NC | Flat Washer | Steel | Plain | .323 x .709 x .031 | washer .709 od x .323 id x .031 thk | 458 |
|
| OneMonroe | NC | Compression Fittings | Brass | 5/16 | 5/16 compression nut brass | 30 |
| |
| Jackson | MS | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 1/2 x 1 | nc l-9 hex c/s | 113 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10-24 x 3/4 | #10-24 x 3/4 phillips pan head thread cutting screw type-f zinc | 2650 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 3/8 | 1/4-20 x 3/8 phillips pan head thread cutting screw type-f zinc | 500 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 slotted indented hex washer head thread cutting screw type-f zinc | 400 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | #6-32 x 3/8 slotted indented hex washer head thread cutting screw type-23 zinc | 14715 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | #6-32 x 3/8 slotted indented hex washer head thread cutting screw type-23 zinc | 1200 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 3/8 | #8-32 x 3/8 slotted indented hex washer head thread cutting screw type-23 zinc | 1078 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1/2 | #8-32 x 1/2 slotted indented hex washer head thread cutting screw type-23 zinc | 2250 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1/2 | #8-32 x 1/2 slotted indented hex washer head thread cutting screw type-23 zinc | 1000 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20 x 1/2 slotted indented hex washer head thread cutting screw type-23 zinc | 130 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 5/16-18 x 3/4 | 5/16-18 x 3/4 slotted indented hex washer head thread cutting screw type-23 zinc | 400 |
|
| OneMonroe | NC | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20 x 3/4 hex washer head z thread rolling screw unslotted | 2000 |
|
| OneMonroe | NC | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 hex washer head z thread rolling screw unslotted | 50 |
|
| OneMonroe | NC | Thumb Screw (Plain) | Steel | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20 x 3/4 type-b regular thumb screw no shoulder zinc | 1150 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 7 | 5/8-11 x 7 a193 b7 fully threaded stud | 155 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 7 1/2 | 1-1/8-8x7-1/2 (oal 7-3/4 ) a193 b7 fully threaded stud | 26 |
|
| OneMonroe | NC | Metal Drill Bits | Steel | 21/64 | 21/64 h.s. drill bit jobber metorite | 9 |
| |
| OneMonroe | NC | F436 Round Structural Washer | Steel | Galvanized | 1/8 | 1 1/8 astm a325 f436 galvanized structural washer (.177 thick) | 127 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade B7 | Plain | 1-8 x 4 1/2 | 1-8 x 4 1/2 astm a193 b7 plain finish heavy hex cap scre | 13 |
|
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | Steel | Black Oxide | 1 1/2 x 2 3/8 x 9/16 | 1-1/2 id x 2-3/8 od x 9/16 w steel black oxide 2-piece clamping collar | 10 |
|
| OneMonroe | NC | Eye Screw | Steel | Plain | 90 | 90 cable eye hook | 26 |
|
| Century | FL | Flat Washer | Plain | .125 x .313 x .032 | nas1149dn432h | 10 |
| |
| Century | FL | Flat Washer | Cadmium/Yellow | 0.328 x .562 x .063 | nas1149e0563p | 10 |
| |
| Century | FL | Machine Screw | Steel | Plain | nas1189-3p-8 screw self locking | 10 |
| |
| Century | FL | Socket Head Cap Screw | Plain | nas1351c03-4 | 10 |
| ||
| Century | FL | Socket Head Cap Screw | Plain | 1/2-20 x 1 3/4 | nas1351c8-28 | 10 |
| |
| Century | FL | Socket Head Cap Screw | Plain | nas1352-06-28p | 10 |
| ||
| Century | FL | Socket Head Cap Screw | Plain | nas1352-8-32p | 10 |
| ||
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | nas1352c02-18 socket head cap screw | 10 |
| |
| Century | FL | Socket Head Cap Screw | Plain | #2-56 x 1/8 | nas1352c02lb2 | 10 |
| |
| Century | FL | Socket Head Cap Screw | Plain | #4-40 x 1 1/8 | nas1352n04-18 | 10 |
| |
| Century | FL | Socket Head Cap Screw | Plain | #4-40 x 5/8 | nas1352n04h10 | 10 |
| |
| Century | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #6-32 x 1/2 | nas1352n06h8 socket cap screw | 10 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Silicon Bronze | Plain | 5/8-11 x 2 | 5/8-11x2 f468 655 silicon bronze hvy hex tap bolt full thread | 2 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Silicon Bronze | Plain | 5/8-11 x 3 | 5/8-11x3 f468 655 silicon bronze hvy hex tap bolt full thread | 194 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Silicon Bronze | Plain | 3/4-10 x 3 | 3/4-10x3 f468 655 silicon bronze hvy hex tap bolt full thread | 175 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M16-2.00 x 110 | M16-2.0x110 8.8 hex bolt plain din 931 | 20 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8< /td> | Plain | M16-2.00 x 120 | M16-2.0x120 8.8 hex bolt plain din 931 | 60 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M20-2.50 x 75 | M20-2.5x75 8.8 hex bolt plain din 931 | 7 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M20-2.50 x 140 | M20-2.5x140 8.8 hex bolt plain din 931 | 45 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M24-3.00 x 140 | M24-3.0x140 8.8 hex bolt plain din 931 | 14 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M24-3.00 x 160 | M24-3.0 x160 8.8 hex bolt plain din 931 | 2 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M24-3.00 x 180 | M24-3.0x180 8.8 hex bolt plain din 931 | 13 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 40 | M12-1.75x40 8.8 hex bolt zinc din 931 | 17 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 70 | M12-1.75x70 8.8 hex bolt zinc din 931 | 20 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 70 | M16-2.0x70 8.8 hex bolt zinc din 931 | 156 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M20-2.50 x 60 | M20-2.5x60 8.8 hex bolt zinc din 931 | 22 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M20-2.50 x 65 | M20-2.5x65 8.8 hex bolt zinc din 931 | 10 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M20-2.50 x 100 | M20-2.5x100 8.8 hex bolt zinc din 931 | 2 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M24-3.00 x 90 | M24-3.0x90 8.8 hex bolt zinc din 931 | 60 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M6-1.00 x 20 | M6-1.0x20 8.8 hex bolt plain din 933 | 298 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M6-1.00 x 45 | M6-1.0x45 8.8 hex bolt plain full thread din 933 | 200 |
|
| SunPack | FL | Hex Head Cap Screw | Class 8.8 | Plain | M8-1.25 x 16 | M8-1.25x16 8.8 hex bolt plain full thread din 933 | 200 |
|
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 55 | m10-1.5 x 55 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 925 |
| |
| Brikksen | Hex Head Cap Screw | Silicon Bronze | Plain | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 hex head cap screw asme | b18.2.1 silicon bronze | b18.2.1 silicon bronze | b18.2.1 silicon bronze | 3000 |
| |
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 3/4 | #10 x 3/4 slotted truss a/ab 18-8ss | 200 |
|
| Hayes | CA | Self-Sealing Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 5/16 | 2-56 x 5/16 p-pan seel scr sil-oring 18-8ss | 155 |
|
| Hayes | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1 5/8 | 1/4-28 x 1 1/4 soc cap screw 5/8 thread 18-8ss heads are 1936 series | 93 |
|
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 5/8 | 6-32 x 5/8 slotted round m/s 18-8ss | 270 |
|
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 5/16 | 6-32 x 5/16 slotted pan m/s 18-8ss | 500 |
|
| Hayes | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 5/16 | 2-56 x 5/16 slotted round m/s 18-8ss | 300 |
|
| Brikksen | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M8-1.25 x 50 | m8-1.25 x 50 hex head cap screw full thread / iso 4017 a4 stainless steel | thread / iso 4017 a4 stainless steel | thread / iso 4017 a4 stainless steel din 933 | 50 |
| |
| Hayes | CA | Hex Tap Bolt (Fully Threaded) | Grade A | Zinc/Clear | 1/4-20 x 4 1/2 | 1/4-20 x 4 1/2 hex tap bolt a307-a zinc | 125 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
