FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Protective Caps & Plugs | ms90376-10rf | 75 |
| |||
| Century | FL | Fender Washer | Steel | Zinc/Clear | 5.0 | m 5.0 steel zinc trivalent fender washers rohs din 9021 | 90000 |
|
| Century | FL | Swage Sleeves, Crimp Sleeves | Plain / Furnace Black | nas43ht8-256 space sleeve | 236 |
| ||
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 5/8 | 6-32 x 5/8 phillips flat hd 18-8 blk ox 6-32 x 5/8 phillips flat hd machine screw 18-8 blk ox | 3600 |
|
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 5/32 (.251-.312) | cherry cr3223-5-6 vechecr3223-5-6 | 100 |
|
| NutsBolts | NE | Turnbuckles | Galvanized | 1/2-13 x 6 | 1/2-13 x 6 jaw end turnbuckle hdg (6 of thread) |
| ||
| NutsBolts | NE | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Plain / Furnace Black | #10 x 3/4 | 10 x 3/4 tek torx flat tamperproof |
| ||
| NutsBolts | NE | Screwdriving Insert Bits & Power Bits | Steel | 7/8 | 7/8 hex bit socket 1 drive |
| ||
| NutsBolts | NE | Magnets | 1 x 1/2 x .060 | 1 x 1/2 x .060 neodymium magnet with north pole adhesive |
| |||
| NutsBolts | NE | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | gc120 bench grinding wheel |
| |||
| NutsBolts | NE | Chains, Roller Chains & Links | Grade B7 | Plain / Furnace Black | 1/2 | 1/2 gr70 chain |
| |
| NutsBolts | NE | Single End Stud | Plain / Furnace Black | 1-8 x 68 3/4 | 1-8 x 68 3/4 ses plain 18 thread |
| ||
| NutsBolts | NE | Sockets | 1/2 | 36m deep impact socket 1/2 drive |
| |||
| Centennia | CO | Hex Machine Bolt | Grade A | Zinc/Clear | 1 1/8-7 x 8 | 1 1/8-7 x 8 nc a307a hex mach bolt zinc | 28 |
|
| Centennia | CO | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 hex c/s gr5 nc dom | 222 |
|
| Centennia | CO | Finished Hex Nut | Plain / Furnace Black | 1-8 | 1-8 hex finish nut | 105 |
| |
| NAPPCO | TX | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-20 x 5/8 | phillips pan thread rolling screw s/s 18-8 #4-20x5/8 | 92 |
|
| Optimas | IL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8 | #8 light split lock washer 18-8 ss | 1468.9845008850098 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Steel | Plain / Furnace Black | M22-1.50 x 12 | m22-1.5 x 12 hex flange pipe plug astm a569 per drawing ppap | 1606.3778303861618 |
|
| Brikksen | FL | Concrete/Masonry Screw (Tapcon, Titen etc.) | Plain / Furnace Black | 3/16 x 3 3/4 | 3/16 x 3 3/4 phillips flat tapcon / white | 2800 |
| |
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain / Furnace Black | M10-1.50 x 130 | m10-1.5 x 130 hex head cap screw din 931 | 425 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain / Furnace Black | M12-1.75 x 45 | m12-1.75 x 45 hex head cap screw full | 950 |
|
| Brikksen | FL | Countersink Cutters | Steel | 1/4-20 x 3 | 1/4-20 x 3 flat 82 degree countersink | 14925 |
| |
| SWACO | OH | universal key 0207300 | 2 |
| ||||
| SWACO | OH | Round Spacer | Steel | Plain / Furnace Black | spacer sleeve chem film nas42dd4-18fc | 2435 |
| |
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain / Furnace Black | aecks-m8-4.5zi atlas insert | 50 |
| ||
| SWACO | OH | Split Lock Washer | Plain / Furnace Black | 1 1/8 | 1 1/8 reg split lock wash pln | 324 |
| |
| SWACO | OH | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 50 | m4-0.70x50 fhcs a2 | 275 |
|
| SWACO | OH | Self-Clinching Standoff | Plain / Furnace Black | so-m3.5-6zi spec pem standoff | 2826 |
| ||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | M2-300 | msia-m2-300 standard insert | 1769 |
| ||
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #10 | #10 l/w ms35335-60 | 628 |
|
| SWACO | OH | Machine Screw | Steel | Cadmium | 100 | screw 100 alloy steel cad ii nas514p632-9p nas514p632-9p | 1490 |
|
| SWACO | OH | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1/2-13 x 4 | 1/2-13x4 square set sc cup stl thru- | 273 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Plain / Furnace Black | 3/8-24 x 1 1/2 | wire insert ms124698 | 5 |
|
| Accutite | CA | Hex Head Cap Screw | Steel | Black Oxide | 1/4-20 x 11/16 | 1/4-20x11/16 hex cap steel blk ox indented hex head | 850 |
|
| BoltCraft | NE | Threaded Rod | Steel | Plain / Furnace Black | 1-8 x 6 | 1-8x6ft threaded rod plain 3/tube | 1 |
|
| NBS | IL | Dowel Pin | Steel | Plain / Furnace Black | 1 1/4 x 6 | 1-1/4x6 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 3/8-24 x 5 | 3/8-24x5 grade 8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1 1/2 | #8x1-1/2 phil flat head sheet metal screw-type-a-hardened-zinc | 25000 |
|
| NBS | CA | Dowel Pin | Steel | Plain / Furnace Black | 1/8 x 7/8 | 1/8x7/8 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | CA | Dowel Pin | Steel | Plain / Furnace Black | 1/4 x 1/4 | 1/4x1/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M12-1.75 x 20 | m12-1.75 x 20mm cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| Field Fas | IL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain / Furnace Black | 1-8 x 4 | 1-8 x 4 a325 hvy hex bolt(no nut) stl p | 155 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Aluminum | Plain / Furnace Black | 5 x 2 | r&k rubber wheel wheel size 5 x2 wheel material neoprene rubber on aluminum ball bearing bearing bore 3/4 wheel bore less bearing 1-3/8 hub length 2-1/4 (2-3/16 ) load capacity 875 lbs. temp rating-30f to +200f 5-0143 | 8 |
|
| OneMonroe | MN | Lock Nut, Flange, Nylon Insert | Steel | Zinc/Clear | M8-1.25 | m8-1.25 nyl ins flange ln stl zncpl bn 6783 iso 7043 din 6926 | 200 |
|
| OneMonroe | MN | Machine Taps | Steel | M20-2.50 | 20 x 2.5mm hss metric tap taper eco pro | 1 |
| |
| OneMonroe | MN | Electrical Lugs & Terminals | amp 172169-1conn male mini-univ mate-n-lock wt 9p-3r | 50 |
| |||
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #10-24 x 1 1/4 | 10-24 x 1-1/4 phillips flat hd m/s-zp | 50 |
|
| OneMonroe | MN | Pulleys & Sheaves | Iron | Plain / Furnace Black | 5/8 | 3.05 od ak type pulley cast iron with 5/8 finished bore | 5 |
|
| OneMonroe | MN | Double End Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 3 3/4 | 1/2-20 x 3 3/4 de stud 18-8 ss 1 1/4 toe x 1 1/4 toe | 52 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster/swivel/02x7/8 tpr wheel/pb/plate/brake/80# | 91 |
| |||
| OneMonroe | MN | Hole Saws | Steel | 2 3/4 | 2-3/4 carbide hole cutter | 1 |
| |
| OneMonroe | MN | Gloves & Hand Protection | xl | armor guys gloves (extra large) | 12 |
| ||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1 | 10-32 x 1 phillips ovalal m/s stainless | 75 |
|
| OneMonroe | MN | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/16 x 3 | 1/16 x 3 zinc finish extended prong cotter pin | 747 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 slottedflat m/s pkg plated pkg qty 100 carton 26 | 600 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/16-24 x 3 1/4 | 5/16-24 x 3 1/4 sae j429 gr 8 hx c/s pkg zinc-yell pkg qty 50 carton 26 | 400 |
|
| OneMonroe | MN | Internal Type HO Retaining Ring | Plain / Furnace Black | 7/8 | 7/8in internal retaining ring (snap ring) | 300 |
| |
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | 1-13/16 x 2 x 0.103 | #133 1-13/16 id x 2 od 0.103 cross section nitrile standard o-ring | 12 |
| |
| OneMonroe | MN | Adapters, Arbors, & Mandrels | Steel | 3/8 | adapter3/8 drive3/8 f-1/2 m adapter | 2 |
| |
| OneMonroe | MN | Arc Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 2 | 3/8-16 x 2 arc stud full thread 304 stainless | 150 |
|
| OneMonroe | MN | Knobs & Star Grips | 5/16-18 x 3/4 | t knob 5/16-18 x 3/4 stud | 17 |
| ||
| OneMonroe | MN | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 6/32 x 3/8 | 6/32 x 3/8 phillipspan m/s w/410 ext sems 18-8ss | 2000 |
|
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain / Furnace Black | M12 x 20 | m12 x 20 alloy dowel pin din 6325 | 345 |
|
| Alma Bolt | MI | Chains, Roller Chains & Links | Plain / Furnace Black | 3/4 | 3/4 system 4 (high test) chain | 256 |
| |
| Alma Bolt | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Aluminum | Plain / Furnace Black | #8-32 (.0937-.1562) | #8-32 aluminum (.0937-.1562 g) rivet-nuts smo-flat | 375 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 12 | socket set screw cone point a2 m3-.50 x 12 din 914 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 90 | hex head cap screw partial thread a2 m8-1.25 x 90 din 931 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 25 | phillips flat head machine screw a2 ph m4-.70 x 25 din 965 | 3000 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 7/8-9 x 4 | 7/8-9 x 4 hex head c/s 316ss | inquire |
|
| Brikksen | FL | Finished Hex Nut | 316, 317, A4 Stainless | Plain / Furnace Black | 3/8-24 | 3/8-24 hex finish nut 316 ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8 x 1 1/4 | 8 x 1-1/4 phillips truss a ss/epoxy | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 50 | m8-1.25 x 50 socket head cap screw 18-8 ss 25 per small bag 5 small bags per master pack-generic brand din 912 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 2 1/4 | 1/2-13 x 2-1/4 hex hd cs ss/chrome- | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1 1/2 | 8-32 x 1-1/2 phillips pan m/s ss 100 per box f-48box | inquire |
|
| Brikksen | FL | Carriage Bolt | Steel | Galvanized | 1/2-13 x 6 1/2 | 1/2-13 x 6-1/2 carriage bolt hdg w 6 of thread | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #10-24 x 3/8 | 10-24 x 3/8 phillips pan m/s 316ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 60 | socket head cap screw partial thread a2 m8-1.25 x 60 din 912 | 1000 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 12 | m5-.8 x 12 socket head cap screw 18-8 ss 50 per small bag 5 small bags per master pack-generic brand din 912 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 16 | slotted flat head machine screw-100 per bag a2 m5-.80 x 16 din 963 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain / Furnace Black | #8 x 3/4 | #8 x 3/4 phillips pan head sms type-a 316 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #10-24 x 1/4 | 10-24 x 1/4 barrel bolt 18-ss thru hole #z4404ss | inquire |
| |
| Brikksen | FL | Service & Repair Kits (Bolt Packs) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3 carriage bolt 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Heavy Hex Nut | Brass | Plain / Furnace Black | 5/8-11 | 5/8-11 heavy hex nut brass | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 12 | socket set screw flat point a2 m8-1.25 x 12 din 913 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 4 | 5/16-18 x 4 slottedround m/s s/s | inquire |
|
| Bossard | AZ | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Plain / Furnace Black | 1/2-13 | lock nut 1/2-13 serrated flange hex | 8000 |
|
| Bossard | AZ | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | rev 10 press stud | 8100 |
| |
| Bossard | AZ | stud flush stainless penn engineering | 26921 |
| ||||
| Optimas | IL | Cotter Pin (Split Pin) | Plain / Furnace Black | 3/16 x .275 | 3/16 x .275 thrust ring retainer dowel pin astm a29 per drawing (p) | 963 |
| |
| Optimas | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Plain / Furnace Black | 1/2 | 3.0 wd x 1 1/2 hgt decal white poly 27 qt/25.7 ltr w/adhsve &barcode per dwg (p) | 99 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | hex machine bolt grade 2 zinc/clear | 25 |
| |
| Siena | IA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 2 1/4 | 1/4-20x2-1/4 hex head cap screw stainless steel 18-8 plain finish | 193 |
|
| Surpless, | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | 60 | 6pc s/a keys carded 60 (4 pcs per box) | 1 |
| ||
| Brikksen | FL | Wing Nut | 316, 317, A4 Stainless | Plain / Furnace Black | M8-1.25 | wing nut american form a4 m8-1.25 din 315 | 1000 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 1 1/4 | 1/2-13 x 1 1/4 fin neck carriage bolt 304ss full thread-head marked 304 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M12-1.75 x 130 | hex head cap screw full thread a4 m12-1.75 x 130 din 933 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M24-3.00 x 120 | hex head cap screw partial thread a4 m24-3.0 x 120 din 931 | inquire |
|
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-1.50 | hex jam nut 1.5 pitch (type-b thin) a2 m16-1.5 din 439 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #10-24 x 1/2 | 10-24 x 1/2 slottedrd m/s 316ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M8-1.25 x 20 | low head (5mm) socket cap screw a4 m8-1.25 x 20 din 7984 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #8 x 2 | 8 x 2 phillips ovalal type-a ss bo | inquire |
|
| Hewes | NY | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1/4 | 10-24x 1/4 socket set scr/cup 18-8 s/s | 50500 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 1/4-20 x 1/2 | 1/4-20 x 1/2 socket cap inconel 825 annealed | 1 |
|
| FasSpcMfg | FL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 1/4-28 x 3/16 | 1/4-28 x 3/16 socket set cup point ni-cu 405 | 2631 |
| |
| FasSpcMfg | FL | Set Screw (Square Head) | ASTM A574 | Plain / Furnace Black | 3/4-10 x 3 1/2 | 3/4-10 x 3 square head set 1/2 dog point alloy rc 45-53 | 5 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 4-40 x 5/16 | 4-40 x 5/16 socket set cup point 316l stainless | 14395 |
| |
| Empire | WA | Finished Hex Nut | Steel | Plain / Furnace Black | 5/16-18 | 5/16-18 finished hex nut | 7873 |
|
| Empire | WA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16 | 5/16 med. split l/w 304 s.s. raycap | 5800 |
|
| Empire | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 x 1/2 | #6 x 1/2 pan phil t/s 18-8 ss | 2700 |
|
| Irwin Ind | Ont | Round Spacer | Steel | Plain / Furnace Black | pem smtso-440-2et surface mount nut SMTSO-440-2ET | 3000 |
| |
| Raw Produ | NJ | Wedge Stud Anchor | Steel | Galvanized | 7/8-9 x 8 | wedge anchor hdg 7/8-9 x 8 | 29 |
|
| Raw Produ | NJ | L-Wrenches, Allen Wrenches & Torx Wrenches | 1/8 | short arm hex key 1/8 | 10562 |
| ||
| Raw Produ | NJ | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M6-1.00 x 35 | hex cap screws-class 8.8 zinc plated steel m6-1.0 x 35mm (pt) | 1886 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5 x 80 | metric phillips pan head ms a2 ss m5 x 80m | 1015 |
|
| Raw Produ | NJ | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 x 2 | square drive deck screws 305 ss #6 x 2 | 92826 |
|
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1 3/8 | spanner ovalal head ms 18-8ss #8-32 x 1-3/8 | 350 |
|
| Raw Produ | NJ | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #2-56 | ms nuts black oxide 304 ss #2-56 | 503 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 1/4 | hex cap screws grade 5 zinc 7/16-14 x 1-1/4 ft | 659 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #6-32 x 3/16 | button head socket cap screws 316 ss #6-32 x 3/16 | 725 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 3/8 | phillips pan head ms 304 ss #6-32 x 1-3/8 | 280 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #8 x 1 1/4 | phillips modified truss head self drill 410 ss-#8 x 1-1/4 | 5456 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #8-18 x 1 1/4 | phillips flat head self drilling screws cr+3 zinc #8-18 x 1-1/4 | 9481 |
|
| Mil-Spec | MD | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M6-1.00 x 20 | m6-1.0 x 20 hex head cap screw 316 stainless steel | 73 |
|
| AEROSPCE | MN | Semi-Tubular Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | g4-12-st-steel/zi hanson rivet/semi tubular steel/zi | 2503 |
| |
| AEROSPCE | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain / Furnace Black | aehs8-518-150 atlas insert | 2708 |
| ||
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 | nas1130-3c-20 10-24 2dia tangless free run 304sst | 200 |
|
| AEROSPCE | MN | fe-832-md pem miniature locknut 303sst black | 22 |
| ||||
| AEROSPCE | MN | r4-90-800-10 southco die cast striker | 15 |
| ||||
| Vogelsang | NJ | Slotted Spring Pin (Roll Pin) | Plain / Furnace Black | M6 x 28 | 6 x 28 slotted spring pins iso 13337 din 7346 | 2500 |
| |
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 x 25 | phillips flat machine screw m10-1.5x25 a2 ss din 965 | 35 |
|
| F. Solutions | OH | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Black Oxide | 1.04 | belleville 1.04 id black oxide | 1000 |
|
| National | Ont | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | 6-32x3/4 pan phil ms sz | 377 |
|
| Mansco | MI | Heavy Hex Structural Bolt (A325, A490, 10.9) | Zinc/Clear | 3/4-10 x 1-3/4 structural bolt a325 triv znc | 550 |
| ||
| Mansco | MI | Plastic Push-In Rivets (Plasti-Rivet etc.) | Nylon (Polyamide) | Plain / Furnace Black | 5/16 dia stem x 3/4 long push-type retainer black nylon (auveco #18815) | 400 |
| |
| AFI | FL | USS Flat Washer | Steel | Zinc/Yellow | 5/8 | 5/8 flat washer uss st zd rohs () () | 686 |
|
| AFI | FL | Hex Head Cap Screw | Steel | Zinc/Yellow | 3/8-16 x 1 | 3/8-16x1 hex hd cs g8 st zd () () | 4500 |
|
| AFI | FL | Weld Nut | Steel | Plain / Furnace Black | 1/4-20 | 1/4-20 three proj weld nut st () | 750 |
|
| AFI | FL | Self-Clinching Stud | Steel | Zinc/Yellow | flush head stud steel yellow zinc () | 1022 |
| |
| AFI | FL | Cap Nut (Acorn Nut) | 316, 317, A4 Stainless | Plain / Furnace Black | M5-0.80 | m5x0.8 cap nut a4 ss din 1587 () | 6099 |
|
| Global Fa | TX | Conical, Ribbed, Fluted Light Duty Plastic Anchor | Nylon (Polyamide) | Plain / Furnace Black | 3/4 | 3/4 nylon hole/plug black keystone electronics 8605 | 68 |
|
| Global Fa | TX | 1/4-28 steel nylon/insertmetal/cap 2-lug anchor cad 11 esna f22na1k3-048 | 200 |
| ||||
| Global Fa | TX | Socket Head Cap Screw | Steel | Plain / Furnace Black | M4-0.70 x 40 | m4-0.7x40 class-12.9socket/cap screw din 91212 | 494 |
|
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain / Furnace Black | avk knurled insertgrip .020-.080 | 155 |
| ||
| Olander | CA | Carriage Bolt | Steel | Zinc/Clear | 1/4-20 x 5 carriage bolt stl zn non-rohs | 223 |
| |
| Olander | CA | Hex Female/Female Standoff | Aluminum | Plain / Furnace Black | m2.5-.45 x 5 x 4.5mm hex fem standoff alum | 8 |
| |
| Olander | CA | 300 Stainless (A1,A2, 18-8,304,310 etc.) | M4 x 0.7 | m4 x 0.7 ez lok ins m8 x 1.25 ext. sst () () | 9 |
| ||
| SBS | MA | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 3/4 | 4-40x3/4 phillips pan sq.cone sems s/s | 475 |
|
| Komar | IL | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Zinc/Clear | #14 x 3 1/4 | #14x3 1/4 slotted hex washer concrete sc zc blue chromate | 300 |
|
| F. Solutions | OH | Finished Hex Nut | Grade 8 | Plain / Furnace Black | 2-4 1/2 | finished hex nut 2-4.5 gr8 | 2 |
|
| Arden | WI | Button Head Socket Cap Screw | Steel | Plain / Furnace Black | #6-32 x 3/8 | 632x3/8 torx button cs pln | inquire |
|
| Arden | WI | 640f-8 parker brass cap | inquire |
| ||||
| THRDFAST | AL | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 5 1/2 | c/b b18.5 | 20 |
|
| THRDFAST | MS | Headed Weld Stud, Shear Connector | Steel | Plain / Furnace Black | 5/8 x 6 1/2 | headed weld stud | 65 |
|
| THRDFAST | MS | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 3/8-16 x 2 | t-316 ss socket c/s b18.2.1 b18.3 | 12 |
|
| BRIGHBEST | IL | Conical, Ribbed, Fluted Light Duty Plastic Anchor | Plastic | Plain / Furnace Black | #7-9 x 3/4 | #7-9x3/4 tubular plastic anchor plain | 13500 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain / Furnace Black | 1 1/8-8 x 7 1/4 | astm a193 gr. b16 all thread stud | 659 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Plain / Furnace Black | 1/2-13 x 3 1/2 | 1/2-13x3-1/2 astm a193 b8m 1 all thread stud | 222 |
|
| Lightning | LA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 9/16 | socket set cup pt 18-8-ss 18-8 s/s | 189 |
|
| Lightning | LA | USS Flat Washer | Steel | Galvanized | 3/8 | astm f844 USS flat | 12880 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
