FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 2 | 1/2x2 uss gr5 hhcs z/p | 936.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 1 3/4 | 1/2x1-3/4 uss gr5 hhcs z/p | 491.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 2 1/4 | 1/2x2-1/4 uss gr5 hhcs z/p | 1074.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/8 x 5 | 1-1/8x5 uss gr5 hhcs z/p | 1.0000 |
|
| Shadran I | IA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Plain / Furnace Black | 5/16 x 3 | 5/16x3 uss gr5 flange bolt | 0.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 2 1/2 | 1/2x2-1/2 uss gr5 hhcs z/p | 777.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 3 3/4 | 1/2x3-3/4 uss gr5 hhcs z/p | 200.0000 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/2 x 5 1/2 | 1/2x5-1/2 uss gr8 hhcs y/z | 22.0000 |
|
| Century | FL | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 5/64 x 3/8 | 5/64 x 3/8 roll/spring pin 420 st.st. q2b rev c | 18697 |
|
| Century | FL | pem tfh-832-8 tfh-832-8 | 18300 |
| ||||
| Century | FL | Machine Screw | Black Oxide | #6-32 x 7/16 | ms51959-29b | 17326 |
| |
| Century | FL | Lock Nut, Nylon Insert | Plain / Furnace Black | #10-32 | ms21044n3 | 2501 |
| |
| Century | FL | parker nichols 38-16507-1006-2 rev.a tie down panduit pt# abmm-d | 300 |
| ||||
| Century | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | parker hannifin fsd a7-88-1 rev.b wm berg pt# d13-2 dowel pin 303 ss | 295 |
| |
| Century | FL | Springs (Compression) | parker/nichols d1-292-1 rev.a spring compression | 255 |
| |||
| Century | FL | parker/nichols d1-41-1 rev.p spring compession | 300 |
| ||||
| Century | FL | parker 004628-2 orifice c12l14 plain (see print) rev a | 300 |
| ||||
| Century | FL | parker 4015430 spring q2b 302 ss wire dia .083 rev 3 | 300 |
| ||||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Plain / Furnace Black | ms51862-60 screw tapping | 17500 |
| |
| Century | FL | Fully Threaded Stud (All Thread) | Zinc/Black | M6 x 15 | m6 x 15 strux stud to print 1320379 1021/1022 zinc black per ps7902 | 17000 |
| |
| Century | FL | eaton 25-294x connector phos bronze rev n unplated e5a | 17000 |
| ||||
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6 x 22 | m6 x 22mm stainless steel soc hd cap screw din 912 | 508 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2 x 4 | m2 x 4mm stainless steel soc hd cap screw din 912 | 16587 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 40 | m4 x 40 soc cap s/s din 912 | 300 |
|
| Century | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M6 x 10 | m6x10 soc cs a4-80 din 912 | 300 |
|
| Century | FL | eaton 32-2222-2 seal panel-30 duro blk silicone rev c16 rohs/reach r5a | 584 |
| ||||
| Century | FL | pem pl-032 pl-032 | 15679 |
| ||||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6 x 3/8 | #6 x 3/8 phillips pan plastite zinc | 11500 |
|
| OneMonroe | NC | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-28 x 1.677 | 1/4-28 x 1.677 long soc hd c/s 302 ss w/moly lube | 91 |
|
| Jackson | MS | Machine Taps | 1-14 | fine thread bottoming tap | 2 |
| ||
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 x 7.25 | 5/8-11 x 7.25 stud 18-8 ss per print | 2 |
|
| OneMonroe | NC | Measuring Tools | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1.50 | gasket spiral wound 1.50 600# rf 304ss/grafoil w/carbon steel gauge ring | 30 |
| |
| Jackson | MS | Machine Taps | M14-1.50 | pitch fine plug tap | 1 |
| ||
| OneMonroe | NC | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain / Furnace Black | M10-1.5-6-1.5-6 | m10-1.5-6g x 16 soc set screw cup pt a4ss w/nylok patch din 916 | 294 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2-56 x 1/2 | 2-56 x 1/2 phillips flat m/s 18-8ss patch and lube wax per kvh spec 56-0087 rev b. make from 2c50pfmc | 750 |
|
| Jackson | MS | Machine Taps | 1 1/2-6 | nc plug tap import | 2 |
| ||
| OneMonroe | NC | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3 x 20 | m3 x 20 soc cs a2ss w/special patch and lube wax per kvh spec 56-0087 rev b din 912-610610 | 750 |
|
| OneMonroe | NC | Dowel Pin | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | .1876 | .1876/.1878 x .740/.760 dowel pin hastelloy c-per print-mark part with orange dye | 36 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Plain / Furnace Black | #8-32 x .595 | 8-32 x .595/.615 soc hd cs stl | 44800 |
|
| OneMonroe | NC | Heat Shrink Tubing | label shrink tube 430006256 | 35 |
| |||
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | per cust#4775 2-56 x .125/.150 slotted pan m/s/18-8ss | 100 |
| |
| OneMonroe | NC | 1-3/4 super security padlock | 3 |
| ||||
| OneMonroe | NC | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 9/16-18 x 5 | 9/16-18 x 5 yellow zinc finish sae j429 grade 8 hex cap screw | 19 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #0-80 x 3/8 | make per print 9282664 rev g 0-80 x 3/8 round hd ms t302hq dfars-pass astm a967 method optional-process and mfg certs req d-lockheed approved processor- | 5218 |
|
| OneMonroe | NC | Plate Washer (Square & Rect.) | Steel | Plain / Furnace Black | varian semiconductor prt-plate mtg laser receiver | 1 |
| |
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 x 1 3/4 | nc hex c/s 18-8 ss | 800 |
|
| OneMonroe | NC | Protective Caps & Plugs | n26/00013 poly end plug per print | 50 |
| |||
| OneMonroe | NC | Flat Washer | Steel | Plain / Furnace Black | 1 7/16 | 1-7/16 insulation washer | 1100 |
|
| OneMonroe | NC | pin/print dwg 0100204 c3602 | 5 |
| ||||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | rigid plate caster | 8 |
| |||
| OneMonroe | NC | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 1 x 1 | 1 id x 1 5/16 panel dia rubber grommet | 6300 |
|
| OneMonroe | NC | Electrical Wires & Cables | 18 | 18 ga. yellow stranded wire100 ft | 1 |
| ||
| OneMonroe | NC | Round Spacer | Resin (Phenolic, etc.) | Plain / Furnace Black | 3/16 | 3/16 round spacer 3/16 length hole clearance .115 phenolic | 515 |
|
| OneMonroe | NC | Round Spacer | Aluminum | Plain / Furnace Black | 1/4 | 1/4 round spacer 1/4 length hole clearance .115 aluminum | 344 |
|
| SRF | AL | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1-8 x 6 | square set cup pt | 2 |
|
| SRF | AL | Straight Anchor Bolt | Steel | Plain / Furnace Black | 7/8-9 x 15 | anchor bolt | - |
|
| SRF | AL | Hex Head Cap Screw | Grade 2 | Plain / Furnace Black | 1 1/4-7 x 7 | hcs | - |
|
| SRF | AL | Gaskets | oil cooler gasket | - |
| |||
| SRF | AL | Coupling Nut | Steel | Zinc/Clear | 7/8-9 x 2 1/2 | coupling nut | 40 |
|
| SRF | AL | Threaded Rod | Grade B7 | Plain / Furnace Black | 3/4-10 x 3 | ft astm a193 b7 all thrd rod | 3 |
|
| SRF | AL | Set Screw (Socket Head) | Steel | Plain / Furnace Black | M10-1.50 x 30 | socket set cup pt s/s | 19 |
|
| SRF | AL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 120 | hcs | 8 |
|
| SRF | AL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #4 x 1/2 | phillips pan t/s type-b | 5,778 |
|
| SRF | AL | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1/4 | weld stud non-flanged s/s | - |
|
| SRF | AL | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 5/8-18 x 18 | b7 stud | - |
|
| SRF | AL | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 1/2 x 2 1/2 (3/8-16) | forged eye bolt shoulder ga | 8 |
|
| SRF | AL | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 10 x 1/8 x 1 4 | 10 x 1/8 x 1 a24r cut-off wheel (stat) | 12 |
| |
| SRF | AL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Plain / Furnace Black | #8-32 x 1/4 | phillips pan thrd cutter type-f | - |
|
| SRF | AL | Key Stock | Steel | Plain / Furnace Black | M10 x 1 | meter square keystock | 1 |
|
| SRF | AL | Socket Head Cap Screw | Steel | Zinc/Clear | 3/8-16 x 2 1/2 | shcs | 38 |
|
| SRF | AL | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 12 x 1/8 x 1 | ductile cut-off wheel speci | - |
| ||
| SRF | AL | Machine Taps | Steel | #6-40 | bottom tap | 6 |
| |
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | 3/32 x 1 3/16 x 1 3/8 | 3/32 thk x 1-3/16 id x 1-3/8 od o-ring | 50 |
| ||
| SRF | AL | Machine Screw | Silicon Bronze | Plain / Furnace Black | 1/4-20 x 3/4 | slotted flat sil brnz | - |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/4-12 x 4 | nf hex c/s | 2 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-18 x 1 1/2 | nf hex c/s 18-8 ss | 12 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/4-12 x 5 | nf hex capscrew yellow | 4 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M12-1.75 x 200 | hex c/s partially threaded | 48 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 3/4 x 3 | nc hex c/s | 9 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16 x 7/8 | nc hex c/s 18-8 ss | 544 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 1/4 x 3 | nc hex c/s | 2 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/16 x 2 | nc hex c/s | 1 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/16 x 2 1/2 | nc hex c/s | 2 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 3/8 x 6 | nc hex c/s | 17 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/8 x 1 1/2 | nc hex c/s | 30 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/8-11 x 2 1/2 | nc hex c/s | 16 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/8 x 4 | nc hex c/s | 44 |
|
| Jackson | MS | Hex Head Cap Screw | Aluminum | Plain / Furnace Black | 1/2-13 x 3 1/2 | f/t hex c/s | 1 |
|
| Jackson | MS | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10 x 1 | hex woodtite type-17 | 10810 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 x 10 | nc hex c/s 18-8 ss | 56 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/8 x 2 1/2 | nc hex c/s | 49 |
|
| Jackson | MS | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-24 x 5/8 | hex washer indented tri-lobe | 9981 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 1/2 x 6 | nc hex c/s 18-8 ss | 10 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4 x 15 | nc hex c/s | 6 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
