FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Hex Head Cap Screw | Class 10.9 | Plain | M18-2.50 x 70 | m18x2.50x70 10.9 hhcs | 5 |
| |
| Shadran I | Hex Head Cap Screw | Class 10.9 | Plain | M20-2.50 x 50 | m20x2.50x50 hhcs 10.9 | inquire |
| |
| Shadran I | Hex Head Cap Screw | Class 10.9 | Plain | M20-2.50 x 60 | m20x2.50x60 hhcs 10.9 | 12 |
| |
| Shadran I | Sockets | gun screw assortment 8-40-12-24 | inquire |
| ||||
| Shadran I | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1024 x 1/2 | 1024x1/2 p tr head ms stainless | 12 |
| |
| Shadran I | Clevis Pin | Plain | 1/4 x 1 | 1/4x1 clevis pin | 11 |
| ||
| Weaver | WA | Hex Tap Bolt (Fully Threaded) | Grade 8 | Plain | 5/16-18 x 2 | 5/16-18x2 gr8 full thread tap bolt plain | 100 |
|
| OneMonroe | NC | female keeper | 42 |
| ||||
| OneMonroe | NC | add patch | 1024 |
| ||||
| OneMonroe | NC | cab lock lockable | 29 |
| ||||
| OneMonroe | NC | center case | 3 |
| ||||
| OneMonroe | NC | thread guard | 24 |
| ||||
| Weaver | WA | Hex Tap Bolt (Fully Threaded) | Grade 8 | Plain | 3/4-10 x 4 1/2 | 3/4-10x4 1/2 gr8 full thread tap bolt plain | 50 |
|
| OneMonroe | NC | extension lock with locking device | 4 |
| ||||
| OneMonroe | NC | 3/8 composite tank flange | 34 |
| ||||
| OneMonroe | NC | lh eye end | 2 |
| ||||
| OneMonroe | NC | 5/16 x 4-1/2 rh eye end | 8 |
| ||||
| OneMonroe | NC | wheel | 50 |
| ||||
| OneMonroe | NC | key cylinder | 8 |
| ||||
| OneMonroe | NC | 21 ft profile a | 1 |
| ||||
| OneMonroe | NC | liftkar | 1 |
| ||||
| OneMonroe | NC | pro touch gm card | 6250 |
| ||||
| OneMonroe | NC | 1/4 tank flange | 2 |
| ||||
| OneMonroe | NC | 2 tank flange | 8 |
| ||||
| OneMonroe | NC | 2-1/2 reverse tank flange | 14 |
| ||||
| OneMonroe | NC | 4 reverse tank flange | 28 |
| ||||
| OneMonroe | NC | swivel castor w/stop fix | 2 |
| ||||
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 5/8-11 x 4 | 5/8-11x4 flat hd socket c/s plain | 10 |
|
| OneMonroe | NC | solid brass wire pull-chrome plated | 124 |
| ||||
| OneMonroe | NC | smn.46-1/4 npt-f40 | 1 |
| ||||
| OneMonroe | NC | 13-28 series brake axle | 133 |
| ||||
| OneMonroe | NC | lakeside axle | 2 |
| ||||
| OneMonroe | NC | hood fastener | 1 |
| ||||
| OneMonroe | NC | hood fastener | 25 |
| ||||
| Weaver | WA | Plow Bolt, Scraper Blade Bolt | Grade 8 | Plain | 1 1/4-7 x 4 | 1 1/4-7x4 gr8 plow bolt scraper head plain | 25 |
|
| OneMonroe | NC | pro-link workpro scrubbers hand soap-5000ml.-2/case | 12 |
| ||||
| OneMonroe | NC | 8 hold tite door holders | 120 |
| ||||
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 5/8-18 x 2 1/4 | 5/8-18x2 1/4 flat hd socket c/s plain non-stnd | 82 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 5/8-18 x 3 | 5/8-18x3 flat hd socket c/s plain non-stnd | 25 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 5/8-18 x 2 | 5/8-18x2 flat hd socket c/s plain non-stnd | 46 |
|
| OneMonroe | NC | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/16 | 6-32 x 3/16 soc set flat pt 18-8ss | 150 |
|
| OneMonroe | NC | hand sanitizer-1 gallon-no gel additive (sold per each/case qty 6) | 1 |
| ||||
| OneMonroe | NC | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 3/32 x 2 1/2 | 3/32 x 2 1/2 cotter pin pkg plated | 500 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 3/4-10 x 2 1/4 | 3/4-10x2 1/4 flat hd socket c/s plain | 25 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 3/4-10 x 2 1/2 | 3/4-10x2 1/2 flat hd socket c/s plain | 7 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 3/4-10 x 3 | 3/4-10x3 flat hd socket c/s plain | 23 |
|
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 3/4-10 x 2 | 3/4-10x2 flat hd socket c/s plain | 38 |
|
| OneMonroe | NC | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/16 | 6-32 x 3/16 soc set cup pt patch 18-8ss bkps | 35 |
|
| OneMonroe | NC | extruded u nut screw lock thread m6-1.0 (50 per) | 7 |
| ||||
| Jackson | MS | Metal Drill Bits | Steel | 5/8 x 3 3/8 | 5/8 x 3 3/8 edp #50a140b end mill bit domestic right hand cut 2 flute | 1 |
| |
| Weaver | WA | Flat Head Socket Cap Screw | Steel | Plain | 1-8 x 4 1/2 | 1-8x4 1/2 flat hd socket c/s plain | 4 |
|
| OneMonroe | NC | Set Screw (Socket Head) | Steel | Plain | #6-32 x 3/16 | 6-32 x 3/16 soc set-cup pt | 113 |
|
| OneMonroe | NC | F436 Round Structural Washer | Steel | Plain | 5/8 | 5/8 f436 structural washer-hdg | 1237 |
|
| OneMonroe | NC | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 25 | sos-m4-25 standoff thru-hole m4 x 25 stainless | 1925 |
|
| OneMonroe | NC | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | 5/16-12 x 7/8 | 5/16-12 x 7/8 h/w/h sheet metal screw | 100 |
|
| OneMonroe | NC | Grease Fittings | Plain | M6-1.0-1.00 | m6-1.0 straight grease fitting | 17 |
| |
| OneMonroe | NC | Internal Type HO Retaining Ring | Phosphate | M52 | 52mm internal retaining rings din 1300-phos/oil (25 sets/per) anderton | 1 |
| |
| OneMonroe | NC | License Plate Hardware | Nylon (Polyamide) | 1/4 | 1/4/#14 license plate nut nylon-gm (25 sets/per) | 1 |
| |
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | gm door trim panel retainer (25/per) | 1 |
| |
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | chrysler moulding clip (1 set/per) | 2 |
| |
| OneMonroe | NC | Sems Machine Screw | Steel | Phosphate | M6-1.0-1.00 x 30 | m6-1.0 x 30mm hex head sems 24mm od phos (50/per) | 1 |
|
| OneMonroe | NC | Solid Rivet | Nylon (Polyamide) | Plain | 1 7/8 | nylon rivet 17/64 hole dia. 1-7/8 length (1 set/per) | 1 |
|
| OneMonroe | NC | Solid Rivet | Aluminum | Zinc/Clear | plywood rivet lge flange hd .192-.196 hole sz (50 per) | 1 |
| |
| OneMonroe | NC | Solid Rivet | Aluminum | Zinc/Clear | #11 | plywood rivet lge flange hd #11 hole sz (50/per) | 2 |
|
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | M20.5 | mazda/toyota door panel retainer 20.5mm lgth (1 roll/per) | 1 |
|
| Century | FL | m21143/2-23 | 62 |
| ||||
| Century | FL | Electrical Lugs & Terminals | ms17352-1 terminal | 85 |
| |||
| Century | FL | Hex Head Cap Screw | nas1612-16a | 24 |
| |||
| Century | FL | Machine Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | nas1802-04-3 | 38 |
| ||
| Century | FL | Springs (Compression) | ms24585c263 | 73 |
| |||
| Century | FL | Key Locking Insert (Keensert, Keysert etc.) | nas1395-3l | 4 |
| |||
| Century | FL | Steel | Plain | nas1578a3r2 | 8 |
| ||
| Century | FL | aes01f312a25aw9a91 | 6 |
| ||||
| Century | FL | Steel | as5174d1010 fitting | 6 |
| |||
| Century | FL | m81714/5-2 | 1 |
| ||||
| Century | FL | Hex Head Cap Screw | ms9089-06 | 7 |
| |||
| Century | FL | Hex Machine Bolt | Steel | Plain | 6 | an4ch6a | 10 |
|
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M4-0.70 x 30 | m4-.7 x 30 phil pan m/s a2 ss passivate din 7985 a passivate din 7985 a | 1,330 |
|
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-lac-440-2 floating self-locking nut 0.360 od 0.054 shank length 4-40 thread 18-8 304 steel/passivate | 2,238 |
| |
| Global | CA | Socket Head Cap Screw | Class 8.8 | Zinc/Clear | M5-0.80 x 70 | m5-.8 x 70 socket cap screw 8.8 steel din 912 zinc clear rohs zinc clear rohs | 500 |
|
| Global | CA | Swage Standoff | Brass | Plain | 9520b-b-0256-0 swg stdf 3/16 rnd x 1/4 l 2-56 thd brass plain 0.139 shank d x 0.105 shank l 0.139 shank d x 0.105 shank l | 678 |
| |
| Global | CA | Captive Panel Screw | Steel | Plain | #10-32 | gs-pf32-032-30cn low pro captive panel scr 0.530 od 0.300 luf 0.060 min sheet th 10-32 thread carbon steel | 11 |
|
| Global | CA | Captive Panel Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | gs-pfk-632-62 slotted captive panel screw 0.340 od 0.545 length 0.060 min sheet th 6-32 thread 18-8 304 steel/passivate | 99 |
| |
| Global | CA | Pipe Flanges | Brass | Plain | M4 x 0.7 | gs-pflb-m4-1 flange threaded insert 7.14 od 7.11 length m4x0.7 thread brass | 2,822 |
|
| Global | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | m3 internal serrated washer stainless steel a2 din 6798 j a2 din 6798 j | 5,162 |
|
| Global | CA | PC Board Inserters, Extractors & Ejectors | Aluminum | Plain | 84191-21eabl military card ejector straight handle 0.093 board left 5052 aluminum chem film (gold) sed locking tab bent leg straight handle 0.093 board left 5052 aluminum chem film (gold) sed locking tab bent leg | 48 |
| |
| Global | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #4-20 x 1/4 | 4-20 x 1/4 torx (6-lobe) flat head thread rolling screw steel zinc clear 48-2 | 17,854 |
|
| Global | CA | Set Screw (Socket Head) | ms51965-29 hex socket set screw military 8-32 thd x 1/4 l steel/ cadmium flat point | 105 |
| |||
| Global | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 600-415-026 rev. j (0.0938 x 2 1/4 dowel pin 18-8 ss) passivate +0.0005 /-0.001 tolerance passivate +0.0005 /-0.001 tolerance | 591 |
| |
| Global | CA | Grade 55 | a55485/06-003n mounting pad military 0.300 w x 0.600 l x 0.030 th ny | 184 |
| |||
| Global | CA | Flat Washer | Steel | Plain | .169 x .304 x .032 | nas620-8 #8 flat washer military 0.304 od x 0.032 th x 0.169 id steel/cadmium | 13 |
|
| Global | CA | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Brass | Plain | #2-56 | 2-56 knurled press nut brass 0.110 body dia x 0.095 length | 1,004 |
|
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/8 | 4-40 x 3/8 phl flt 100 ss pa screw patch | 1,286 |
|
| Global | CA | Machine Screw | Steel | Black Oxide | #6-32 x 1/4 | 6-32 x 1/4 flat u/c torx (6-lobe) machine screw steel black oxide | 157,675 |
|
| Global | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M2.5-0.45 x 5 | m2.5-.45 x 5 mm torx flat machine screw 18-8 stainless steel passivate iso 14581 | 25 |
|
| Global | CA | Button Head Socket Cap Screw | Steel | Zinc/Clear | #6-32 x 1/4 | 6-32 x 1/4 torx button cap screw alloy steel zinc clear | 18,121 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 1 1/2 | hex cap scr gr5 zinc pltd 3/4-10x1-1/2 | 21 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 1 3/4 | hex cap scr gr5 zinc pltd 3/4-10x1-3/4 | 6 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/8-9 x 2 1/2 | hex cap scr gr5 zinc pltd 7/8-9x2-1/2 | 4 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/8-9 x 3 1/4 | hex cap scr gr5 zinc pltd 7/8-9x3-1/4 | 290 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/8-9 x 5 | hex cap scr gr5 zinc pltd 7/8-9x5 | 1 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/8-9 x 8 | hex cap scr gr5 zinc pltd 7/8-9x8 | 151 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 2 3/4 | hex cap scr gr5 zinc pltd 1-8x2-3/4 | 9 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-14 x 1 3/4 | hex c/s grade 5 stl zinc plt 1-14x1-3/4 | 5 |
|
| NAPPCO | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-14 x 2 1/2 | hex c/s grade 5 zinc 1-14x2-1/2 | 38 |
|
| NAPPCO | TX | Finished Hex Nut | Grade 5 | Plain | 1/2-13 | hex fin nut grade 5 1/2-13 | 230 |
|
| NAPPCO | TX | Heavy Hex Nut | Grade 5 | Zinc/Clear | 3/8-16 | gr5 heavy hex nut steel zp 3/8-16 | 82 |
|
| NAPPCO | TX | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 9/16-12 x 1 1/2 | hex tap bolt grade 5 zp 9/16-12x1-1/2 imp | 100 |
|
| NAPPCO | TX | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #15 | #15 mill finish 304 s/s trim nails | 15 |
| |
| NAPPCO | TX | Service & Repair Kits | 61-20-104-11 kit consists of | 29 |
| |||
| NAPPCO | TX | Latches & Catches | 62-10-114-20 lift&turn compression latch | 82 |
| |||
| NAPPCO | TX | Latches & Catches | 62-10-203-50 lift&turn compression latch | 43 |
| |||
| NAPPCO | TX | Latches & Catches | 62-43-35 lift&turn compression latch | 11 |
| |||
| NAPPCO | TX | Finished Hex Nut | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/4-10 | hex fin nut s/s t410 3/4-10 | 88 |
|
| NAPPCO | TX | Socket Head Cap Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-32 x 3/4 | hexwashthdcutscs/st410 t/f 10-32x3/4 | 300 |
|
| NAPPCO | TX | Metal Drill Bits | 400 Stainless (405, 410,416,420,430 etc.) | hexwash drillsc#3 s/s t410 10-16x1-3/4 | 879 |
| ||
| Jackson | MS | Metal Drill Bits | Steel | 3/4 x 3 5/8 | 3/4 x 3 5/8 edp #50a148b end mill bit domestic right hand cut 2 flute | 1 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 120 | m10-1.5 x 120 hex head cap screw | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) din 931 | 1330 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 120 | m10-1.5 x 120 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 9700 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 130 | m10-1.5 x 130 hex head cap screw | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) din 931 | 17 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 130 | m10-1.5 x 130 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 10 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 140 | m10-1.5 x 140 hex head cap screw | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) din 931 | 128 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 16 | m10-1.5 x 16 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 4500 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 16 | m10-1.5 x 16 hex head cap screw full | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag din 933 | 292 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 160 | m10-1.5 x 160 hex head cap screw | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) din 931 | 1570 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 160 | m10-1.5 x 160 hex head cap screw full | thread a2 stainless steel(must have 17mm af head) | thread a2 stainless steel(must have 17mm af head) | thread a2 stainless steel(must have 17mm af head) din 933 | 80 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 18 | m10-1.5 x 18 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 7950 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 18 | m10-1.5 x 18 hex head cap screw full | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag din 933 | 215 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 180 | m10-1.5 x 180 hex head cap screw | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) | a2 stainless steel (must have 17mm af head) din 931 | 30 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 180 | m10-1.5 x 180 hex head cap screw full | thread a2 stainless steel | thread a2 stainless steel | thread a2 stainless steel din 933 | 936 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 20 | m10-1.5 x 20 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 7550 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 20 | m10-1.5 x 20 hex head cap screw full | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag din 933 | 593 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M10-1.50 x 20 | m10-1.5 x 20 hex head cap screw a2 | stainless steel black oxide & oil | stainless steel black oxide & oil | stainless steel black oxide & oil | 1786 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M10-1.50 x 20 | m10-1.5 x 20 hex head cap screw full | thread a2 stainless steel black oxide & oil packed 10 per bag | thread a2 stainless steel black oxide & oil packed 10 per bag | thread a2 stainless steel black oxide & oil packed 10 per bag din 933 | 171 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 22 | m10-1.5 x 22 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 7500 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 22 | m10-1.5 x 22 hex head cap screw full | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag | thread a2 stainless steel packed 25 per bag din 933 | 216 |
| |
| Brikksen | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 25 | m10-1.5 x 25 hex head cap screw full | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) | thread a2 stainless steel (must have 17mm af head) din 933 | 16450 |
| |
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Nickel Plated | x 710 | 750-0000-310 sx 710 brass/nkl socket | 22995 |
|
| IndexFast | CA | Flat Washer | Brass | Plain | .028 | d1869 brass .028 terminal washer brass/plain | 7888 |
|
| IndexFast | CA | auveco catalogs dot fasteners | inquire |
| ||||
| IndexFast | CA | Machine Dies | 66075 die for 74-0783 | inquire |
| |||
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Plain | k87-0000-346 sk 50/ant stud ykk dot fasteners | inquire |
| |
| IndexFast | CA | Cushioned Pipe & Tube Loop Clamp | Steel | Plain | 97-12 | w97-12np cord clamkl | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | #8-18b | c9223-8z-27 type-u speed nut 8-18b range .120-.140 cte .531 natural | inquire |
|
| IndexFast | CA | Snap Fasteners (Snap Studs, Snap Caps, etc.) | 04501sk 33ln socket/nkl | inquire |
| |||
| IndexFast | CA | Machine Dies | gs-3 cutting die | inquire |
| |||
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | c18235-312-4 push on type speed nut .312 round black tinnerman c18235-312-4(surplus) | inquire |
| |
| TownCountry | AR | Lag Screw | Galvanized | 5/16 x 1 1/2 | 5/16 x 1 1/2 hex lag screw hot dip galvanized | 2200 |
| |
| TownCountry | AR | Lag Screw | Galvanized | 5/16 x 1 1/2 | 5/16 x 1 1/2 hex lag screw hot dip galvanized | 2200 |
| |
| Weaver | WA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Plain | 7/16-14 x 1 1/4 | 7/16-14x1 1/4 gr8 flange bolt plain | 9 |
|
| Weaver | WA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Plain | 5/8-18 x 3 | 5/8-18x3 gr8 flange bolt plain | 10 |
|
| TownCountry | AR | Lag Screw | Galvanized | 5/16 x 3 | 5/16 x 3 hex lag screw hot dip galvanized | 1200 |
| |
| Weaver | WA | Carriage Bolt | Grade 8 | Plain | 5/8-11 x 2 1/2 | 5/8-11x2 1/2 gr8 carriage bolt plain | 8 |
|
| TownCountry | AR | Lag Screw | Galvanized | 5/16 x 3 | 5/16 x 3 hex lag screw hot dip galvanized | 1200 |
| |
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 3/4-16 x 2 | 3/4-16x2 gr8 12pt hd flange bolt plain | 10 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 3/8-16 x 2 1/2 | 3/8-16x2 1/2 gr8 12pt hd flange bolt plain | 460 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 7/16-20 x 1 1/2 | 7/16-20x1 1/2 gr8 12pt hd flange bolt plain | 16 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 5/8-18 x 2 1/2 | 5/8-18x2 1/2 gr8 12pt hd flange bolt plain | 5 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 5/8-18 x 3 | 5/8-18x3 gr8 12pt hd flange bolt plain | 25 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 5/8-18 x 3 1/2 | 5/8-18x3 1/2 gr8 12pt hd flange bolt plain | 24 |
|
| Weaver | WA | 12 Point Flange Screw (CounterBore) | Grade 8 | Plain | 5/8-18 x 4 | 5/8-18x4 gr8 12pt hd flange bolt plain | 25 |
|
| Weaver | WA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1 1/4-12 | 1 1/4-12 gr c all steel lock nut zinc import | 16 |
|
| Weaver | WA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1 1/2-12 | 1 1/2-12 gr c all steel lock nut zinc import | 2 |
|
| Weaver | WA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 3/8-16 x 1 1/2 | 3/8-16x1 1/2 gr8 flange screw phos & oil | 428 |
|
| Weaver | WA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 5/8-11 x 2 1/2 | 5/8-11x2 1/2 gr8 flange bolt yellow zinc | 25 |
|
| Weaver | WA | Carriage Bolt | Grade 8 | Plain | 1/2-13 x 6 | 1/2-13x6 gr8 carriage bolt plain | 19 |
|
| Weaver | WA | Carriage Bolt | Grade 8 | Plain | 3/4-10 x 3 1/2 | 3/4-10x3 1/2 gr8 full thread shaker screen carriage bolt plain | 23 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Plain | 3/8-16 x 2 | 3/8-16x2 gr9 hex c/s plain | 800 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Plain | 3/8-16 x 2 1/2 | 3/8-16x2 1/2 gr9 hex c/s plain | 600 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Plain | 1/2-13 x 1 | 1/2-13x1 gr9 hex c/s plain | 750 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 5/8-11 x 4 | 5/8-11x4 gr9 hex c/s yellow zinc | 324 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 5/8-11 x 6 | 5/8-11x6 gr9 hex c/s yellow zinc | 150 |
|
| Weaver | WA | Hex Head Cap Screw | Grade 9 | Plain | 3/4-10 x 3 | 3/4-10x3 gr9 hex c/s plain | 20 |
|
| Weaver | WA | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #12 x 3/4 | 12x3/4 round u-drive screw zinc | 500 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
