FCH Member Advertisement
FCH News
Power Tool Accessories
43,167 Power Tool Accessories, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Machine Taps | Steel | 1/2 | 3m 1126 1/2 w x 36yrds copper foil tap 3m 1126 1/2 w x 36yrds copper foil tape 76555a642 upc 0-00-51128-55902-4 | 12 |
| |
| Century | FL | insert screw thd locking ags3709 | 50 |
| ||||
| Century | FL | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 1/4 x 12 | 14-1590 1/4 x 12 sand belt rev 14-1590 1/4 x 12 sand belt resin bond alum oxide bias joint or butt joint 60 grit rev | 200 |
| |
| Century | FL | Battery Packs | Steel | see cputc34-06247-00 j-hook (battery hold down)-less vinyl coating | 173 |
| ||
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 1 1/4 x 24 x 29 | 1-1/4x24x29 rebar demon sds-max 4-cutter carbide-tipped hammer bit | 1 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 1 3/8 x 24 x 29 | 1-3/8x24x29 rebar demon sds-max 4-cutter carbide-tipped hammer bit | 1 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 1 1/8 x 24 x 29 | 1-1/8x24x29 rebar demon sds-max 4-cutter carbide-tipped hammer bit | 2 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 1 1/8 x 31 x 36 | 1-1/8x31x36 rebar demon sds-max 4-cutter carbide-tipped hammer bit | 1 |
| |
| OneMonroe | NC | Masonry & Concrete Drill Bits | Steel | 1/2 x 13/16 | 1/2 x 13/16 sds-plus 2 cutter stop bit | 11 |
| |
| OneMonroe | NC | Reciprocating Saw Blades | Steel | 6 | 6 demo demon carbide-tipped recip blade for nail-embedded wood (3 pk) | 2 |
| |
| OneMonroe | NC | Reciprocating Saw Blades | Steel | 6 | 6 steel demon solid carbide strip recip blade for thin metals (single) | 5 |
| |
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | M6 | 1/4 dr. 6mm hex bit socket 45mml | 22 |
| |
| Jackson | MS | Machine Taps | Steel | m9 x 1.00 pitch plug tap import | 2 |
| ||
| Jackson | MS | Machine Taps | Steel | 5/16-24 nf taper tap (starter tap) import | 1 |
| ||
| Jackson | MS | Machine Taps | Steel | 12-28 nf taper tap (starter tap) | 2 |
| ||
| Jackson | MS | Hole Saws | Steel | 3 1/2 rigid hole saw tool-special order rigid #52940 | 1 |
| ||
| Jackson | MS | Hole Saws | Steel | 4 rigid hole saw tool-special order | 2 |
| ||
| Jackson | MS | Hole Saws | Steel | 4-1/2 rigid hole saw tool-special order | 4 |
| ||
| TownCountry | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 7 x 7/8 | 7 x 7/8 fibre disc ceramic bond 50 grit x-weight cr456 | 375 |
| ||
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | #1 x 1 | #1 x 1 phillips bit (reduced) | 125 |
| |
| RePneu To | MI | Metal Drill Bits | Steel | Black Oxide | 3/8-0.375 x 135 | 3/8 (0.375) jobber 135deg m2 hss black and gold proferred m2 hss black and gold drill bit | 24 |
|
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | 1 x 2 1/2 | # 1 x 2-1/2 phil bit tip | 26 |
| |
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | #1 | #1 slotted bit tip-long | 14 |
| |
| Endries | WI | Metal Drill Bits | Steel | f r42c stub drill bit high speed steel | 960 |
| ||
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3 | 3in diameter 3m 2380 natural masking tape disc 100/rl | 12 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3 | 051144-22406 3 120grt 361f roloc disc | 250 |
| |
| Endries | WI | Battery Packs | Steel | 9 | 9 volt battery (en22) alkaline | 12 |
| |
| Endries | WI | Nut Driving Bits, Nutsetters | Steel | M6 | m6n-0816-3 1/2x3 hex dr nutsetter magnetic (apex | 9 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 445-4 x 1/4 | 445-4x 1/4 hex dr insert #.046 bit | 5 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 2 | 69957399710 2in 80 grit aluminum oxide quick change flap disc | 50 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 3 | 7485 3 roloc disc coars | 25 |
| |
| Endries | WI | Collets | Brass | Plain / Furnace Black | M8 | m8 brass b collet | 5 |
|
| Endries | WI | Nut Driving Bits, Nutsetters | Steel | 1/4 x 2 9/16 | iwaf24314-3 1/4x2-9/16 overall length magnetic nutsetter | 32 |
| |
| Endries | WI | Machine Taps | Steel | #20 x 12 | 1805 #20x12in overall length high speed steel spiral point 2 flute aircraft extension steam oxide | 6 |
| |
| Endries | WI | Metal Drill Bits | Steel | d | 39490 letter d 190-ag high speed steel 135deg jobber drill bit | 6 |
| |
| GLF | OH | Screwdriving Insert Bits & Power Bits | Steel | #2 x 2 | #2 x 2 sq power 1/4 drive bit | 2536 |
| |
| GLF | OH | Metal Drill Bits | Steel | 0.1285 | #30 118 gen purp jobber drill bit hss | 6 |
| |
| GLF | OH | Metal Drill Bits | Steel | 0.173 | #17 135 split pt nitro drill bit hss brz/blk | 8 |
| |
| GLF | OH | Metal Drill Bits | Steel | 17/64 | 17/64 135 split pt nitro drill bit hss brz/blk | 38 |
| |
| GLF | OH | Metal Drill Bits | Steel | 7/16 | 7/16 135 split pt nitro drill bit hss brz/blk | 32 |
| |
| GLF | OH | Metal Drill Bits | Steel | 7/32 | 7/32 135 split pt nitro drill bit hss brz/blk | 72 |
| |
| GLF | OH | Annular Cutters | Steel | 9/16 | 9/16 annular cutter hss | 1 |
| |
| GLF | OH | Screwdriving Insert Bits & Power Bits | Steel | T25 x 1 15/16 | t25 x 1-15/16 torx power 1/4 drive bit | 150 |
| |
| GLF | OH | Screwdriving Insert Bits & Power Bits | Steel | T30 x 1 | t30 x1 tamperproof torx 1/4 drive bit | 12 |
| |
| GLF | OH | Screwdriving Insert Bits & Power Bits | Steel | T25 x 1/4 | t25 tamperproof torx 1/4 drive bit | 78194 |
| |
| Endries | WI | Metal Drill Bits | Steel | 1/4 | 051516 r51fs 1/4 118 degree hi-helix taper drill bit | 22 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 5 | blue line 1947 series sm rl 5 alum ox 100g disc | 2 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 170p3ax #3x2-3/4 phillips power dr bit | 97 |
| ||
| Irwin Ind | Ont | Battery Packs | Steel | Plain / Furnace Black | 595 | keystone 595 steel battery contact | 815 |
|
| Irwin Ind | Ont | Battery Packs | 414 | seiko bp-4005-e battery pack for dpu414 | 3 |
| ||
| Irwin Ind | Ont | Screwdriving Insert Bits & Power Bits | M1 | metric hex insert bit 3mm hex 1 length | 2 |
| ||
| Endries | WI | Nut Driving Bits, Nutsetters | Steel | 1/4 x 12 | 1300mn416 1/4x12 overall length magnetic nutsetters (vega) | 14 |
| |
| Endries | WI | Masonry & Concrete Drill Bits | Steel | 5/32 x 4 x 6 | 48-20-9001 (3) 5/32 x 4 x 6 hammer drill bit (milwaukee tool only) | 4 |
| |
| Endries | WI | Machine Dies | Steel | 9-1204-21 3/4x1in medium duty die spring blue | 8 |
| ||
| Endries | WI | Machine Dies | Steel | 1 1/2 x 4 | 9-2416-11 1-1/2x4in light duty die spring green | 8 |
| |
| Endries | WI | Machine Dies | Steel | M10 | mini high force gas die spring 10mm stroke yellow | 20 |
| |
| Endries | WI | Metal Drill Bits | Steel | 3/16 | 3/16 hex bit drilled 1/4 hex 1 long | 13300 |
| |
| GUIDON | NJ | Hole Saws | Steel | Plain / Furnace Black | 1 1/2 | Morse Cutting Tools AT24 CARBIDE HOLE SAW | 2 |
|
| GUIDON | NJ | Hole Saws | Steel | Plain / Furnace Black | 1 1/16 | Morse Cutting Tools AV17 BI-METAL | 2 |
|
| GUIDON | NJ | Hole Saws | Steel | Plain / Furnace Black | 1 7/8 | Morse Cutting Tools AV30 BI-METAL | 5 |
|
| MESAFAST | CA | Metal Drill Bits | Steel | 0.1285 | #30 x 6 hss aircraft extension drill | 60.0 |
| |
| MESAFAST | CA | Masonry & Concrete Drill Bits | Steel | 1/4 x 4 | 1/4 x 4 carbide masonry drill serrated itm | 127.0 |
| |
| MESAFAST | CA | Metal Drill Bits | Steel | Black Oxide | #1 | #1 heavy duty jobber length drill black & gold | black & gold | black & gold | 36.0 |
|
| MESAFAST | CA | Metal Drill Bits | 9/32 x 6 | 9/32x6 hss aircraft extension drill | 6.0 |
| ||
| Endries | WI | Metal Drill Bits | Steel | 15/64 | 05690 15/64 190-ag high speed steel 135deg jobber drill bit | 36 |
| |
| Endries | WI | Collets | Galvanized | collet extender-06 mgl | 12 |
| ||
| Endries | WI | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 3 | 30830400 3in ceramic 50 grit type r quick change disc (gemtex only) | 400 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 4 1/2 | 15w454 4-1/2 diameter zirconia alumina 40 grit flap disc (j walter inc only) | 20 |
| |
| Endries | WI | Machine Taps | Steel | #8-32 | 8-3 2 bottoming style tap | 4 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 1 15/16 | 49-tx-15 1/4 hex drive bit t-15 driver 1-15/16 overall length | 101 |
| |
| Endries | WI | Metal Drill Bits | Steel | 0.1285 | #30 general purpose high speed steel straight shank jobber drill bit | 12 |
| |
| Endries | WI | Machine Dies | Steel | 1/4-28 | #6523 1/4-28 hex die 1 width across flats (hanson only) | 5 |
| |
| Endries | WI | Machine Dies | Steel | 6-10 | #9727 6-10 die (hanson only) | 3 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 27 | 70160 size 27 torx driver tamperproof torx-licensed bit (wiha) | 30 |
| |
| Endries | WI | Metal Drill Bits | Steel | 3/16 x 4 1/2 | 7901018 3/16x4-1/2 tapcon bit (itw red head only) | 78 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 1/4 | 170r2ax #2x2-3/4 square drive power x-hard bit 1/4 hex | 40 |
| |
| Endries | WI | Metal Drill Bits | Steel | 15/64 x 12 | 27270 15/64x12 t-160 high speed steel 118 degree longboy drill bit | 2 |
| |
| Endries | WI | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 3 x 2 x 1/4 | 08834137460 3x2x1/4 40 grit flap wheel (norton) | 10 |
| |
| Endries | WI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 2 x 48 | 10783ri 2x48 60 grit aluminum oxide belt (hnpn) | 192 |
| |
| Endries | WI | Metal Drill Bits | Steel | 23/64 x 12 | 27350 23/64x12 overall length t-160 longboy drill bit | 2 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 1/4 | 150t15a size 15 torx driver torx-licensed power bit 1/4 hex drive 2in overall length | 10 |
| |
| Endries | WI | Metal Drill Bits | Titanium | 3/16 | 48-89-4609 3/16 titanium shockwave drill bit | 50 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | #3 x 1 | 125p3a #3x1in overall length phillips insert bit (vega) | 40 |
| |
| Endries | WI | Machine Taps | Steel | 5/8-11 | 60420 5/8-11 3 flute magnum plug tap | 3 |
| |
| Eurolink | SC | Screwdriving Insert Bits & Power Bits | Steel | 1/4 x 25 | 1/4x25 tx-pin 30 cv-steel security bit for 6-lobe drive + pin | inquire |
| |
| Irwin Ind | Ont | Battery Packs | lr6am3/evg/s 1.5 volt metal jacket battery | 120 |
| |||
| Irwin Ind | Ont | Battery Packs | 6 | l6f22 9 volt metal jacket battery | 40 |
| ||
| Irwin Ind | Ont | Battery Packs | Steel | Plain / Furnace Black | 204 | keystone 204 steel snap-on battery contact | 20000 |
|
| Irwin Ind | Ont | Battery Packs | 502 | keystone 502 lithium coin cell battery hldr | 200 |
| ||
| Irwin Ind | Ont | Adapters, Arbors, & Mandrels | threaded bushing adapter part # 2500/1/5 | 250 |
| |||
| Irwin Ind | Ont | Screwdriving Insert Bits & Power Bits | wiha 74563 t6 x 90mm torx power bit | 5 |
| |||
| Irwin Ind | Ont | Machine Taps | Plastic | Plain / Furnace Black | value plastics xp-2 black nylon 10-32 taper plug | 248 |
| |
| Irwin Ind | Ont | Machine Dies | pro crimper iii hand c/w die assembly 58630-2 | 1 |
| |||
| MetricThrd | CA | Screwdriving Insert Bits & Power Bits | t45 | t-45 tamper proof torx bit | stock |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 high density flaps disc zirconia (80grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 high density flap disc zirconia (24 grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 27 stand flap disc zirconia(80grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 stand flap discs zircona (24grit) | 8 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type29 stand flap discs zirconia (80grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 27 stand flap disc zirconia (120grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 stand flap disc zirconia (40grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 stand flap discs zirconia (36grit) | 9 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 5/8 | 4 1/2 x 5/8-11 type 29 stand flap disc zirconia (120grit) | 9 |
| ||
| Purchase | MO | Metal Drill Bits | #9 | #9 gen. purpose jobber 135 deg. split point | 12 |
| ||
| Purchase | MO | Metal Drill Bits | 3/16 | 3/16 135 deg. split point jobber length | 12 |
| ||
| Purchase | MO | Machine Taps | Chrome Plated | 1/4-20 | 1/4-20 tap 2 flutes h3 pitch spiral point plug chrome | 12 |
| |
| Purchase | MO | Metal Drill Bits | 3/8 | 3/8 135 deg split pt jobber bit | 42 |
| ||
| Purchase | MO | Metal Drill Bits | 17/64 | 17/64 135 deg. spilt pt. jobber length bit | 60 |
| ||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | silicon carbide floor sanding discs 15 dia x 2 hole grit 16x | 19 |
| |||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | silicon carbide floor sanding disc 17 dia x 2 hole grit 12x | 18 |
| |||
| Purchase | MO | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | silicon carbide floor sanding disc 16 dia. x 2 hole grit 36x | 18 |
| |||
| MMCC | IL | Reamer Bits | Steel | Plain / Furnace Black | M14 | str flute machine reamer din 212a hss xs | inquire |
|
| MMCC | IL | Machine Taps | Steel | Plain / Furnace Black | M5.5 x 5.5 | tap extension din 377 chrome vanadium steel plain | inquire |
|
| MMCC | IL | Impact Socket Drivers | Steel | M22 | power drive socket din 3129 chrome vanadium steel 6-point | 2 |
| |
| MMCC | IL | Metal Drill Bits | Steel | Plain / Furnace Black | M2.55 | jobber drill din 338 hss chrome vanadium steel 6-point | inquire |
|
| MMCC | IL | Metal Drill Bits | Steel | Plain / Furnace Black | M2.85 | jobber drill din 338 hss chrome vanadium steel 6-point | inquire |
|
| MMCC | IL | Metal Drill Bits | Steel | Plain / Furnace Black | M8.1 | jobber drill din 338 hss chrome vanadium steel 6-point | inquire |
|
| MMCC | IL | Metal Drill Bits | Steel | M8.5 | l.h. jobber drill din 338 hss left hand | 4 |
| |
| MMCC | IL | Metal Drill Bits | Steel | M15.5 | jobber drill din 338 hss rs | 13 |
| |
| MMCC | IL | Metal Drill Bits | Steel | M14.5 | jobber drill din 338 hss rs | inquire |
| |
| MMCC | IL | Metal Drill Bits | Steel | M17.5 | m17.5 jobber drill din 338 hss rs | inquire |
| |
| MMCC | IL | Metal Drill Bits | Steel | M10 | jobber drill din 338 hss xs | inquire |
| |
| MMCC | IL | Metal Drill Bits | Steel | Plain / Furnace Black | M26.5 | morse shank drill din 345 hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M14 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M13 | single end mill din 327ba hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M15 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M10 | end mill din 327bm hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M10.5 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain / Furnace Black | M12 | end mill din 844m hss xs | inquire |
|
| MMCC | IL | Reamer Bits | Steel | Plain / Furnace Black | M10 | spiral flute mach reamer din 212b hss xs | 2 |
|
| MMCC | IL | Reamer Bits | Steel | Plain / Furnace Black | M8 | spiral flute mach reamer din 212b hss xs | 2 |
|
| SunPack | FL | Metal Drill Bits | Silicon Bronze | Painted | #17 | #17 hss black/bronze nitro 135-deg jobber drill bit | 11 |
|
| SunPack | FL | Metal Drill Bits | Silicon Bronze | Painted | 11/32 | 11/32 hss black/bronze nitro 135-deg jobber drill bit | 3 |
|
| SunPack | FL | Metal Drill Bits | Silicon Bronze | Painted | 1/2 | 1/2 hss black/bronze nitro 135-deg jobber drill bit | 40 |
|
| SunPack | FL | Metal Drill Bits | 5/16 | l.h. hss bright 118-deg jobber drill bit | 5 |
| ||
| SunPack | FL | Metal Drill Bits | Silicon Bronze | Painted | 3/4 | 3/4 hss black/bronze nitro 118-deg s&d drill bit w/1/2 shank | 4 |
|
| SIS | AZ | Battery Packs | battery 12 v 13ah sealed vent lid | 2920 |
| |||
| SIS | AZ | Masonry & Concrete Drill Bits | 5/32 x 6 | 5/32x6 sds bit | 5 |
| ||
| SIS | AZ | Metal Drill Bits | 5/16 | 5/16 jobber bit | 6 |
| ||
| Eurolink | SC | Metal Drill Bits | #2 | # 2 moris taper drill bit 9/16 | inquire |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #1 x 1 | phillips bit #1-p1 | 212 |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #3 x 1 | phillips bit #1-p3 | 206 |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #1 x 2 | phillips power bit #200-p1 | 200 |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #3 x 2 | phillips power bit #200-p3 | 200 |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #2 x 1 | phillips bit #1-p2 | 197 |
| ||
| THRDFAST | FL | Screwdriving Insert Bits & Power Bits | #2 x 2 | phillips power bit #200-p2 | 180 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
