FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Bossard | AZ | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | rivet steel zinc 15k/carton avdel 1810-6480 | 533526 |
| |
| Bossard | AZ | Painter's Tape (Masking Tape) | tape masking 36 mm x 60yds | 38 |
| |||
| Bossard | AZ | Finished Hex Nut | Steel | Plain | clipnut | 280 |
| |
| Bossard | AZ | Steel | rev c cable assembly microsemi | 3 |
| |||
| SWACO | OH | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3.5 x 19 | m3.5 x 19mm ph ovalal type-c st a2 ss | 1954 |
|
| SWACO | OH | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | 25 | p-kfs2-440 pem pcb nut 25 pkg | 417 |
| |
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Plain | iutc-832 standard insert | 7539 |
| ||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Plain | M3 | isc-m3 standard insert | 10804 |
| |
| SWACO | OH | Insert Installation Tools & Accessories | Plain | 5523-18 heli-coil master kit | 34 |
| ||
| Optimas | IL | Cushioned Pipe & Tube Loop Clamp | Steel | Zinc/Yellow | 19.4 | 19.4mm dia single p-form clamp steel zinc yellow.0003 18mm wd silcone cushion isir | 3664 |
|
| Optimas | IL | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 7/8 | 4-1/2x7/8 type-27 36 grit bonded grain green bond grinding wheel | 210 |
| ||
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2-1/2 carr bolt ss | 8000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 slotted fillister m/s ss | inquire |
|
| Brikksen | FL | T-Nut (Tee Nut) | Steel | Zinc/Clear | #10-24 x 9/32 | 10-24 x 9/32 tee nut z/p 3 prong | inquire |
|
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 | toothed lock washer external a2 m10 external din 6797a | 19000 |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-24 x 1 | 10-24 x 1 phillips flat type-f 410 ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | Brass | Plain | 1/2-13 x 1 | 1/2-13 x 1 hex hd cs brass | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M1.6-0.35 x 6 | phillips pan head machine screw a2 ph m1.6-.35 x 6 din 7985 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M10-1.50 x 40 | hex head cap screw full thread a4-80 m10-1.5 x 40 din 933 | 40 |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/4 x 1 7/8 | 1/4 x 1 7/8 phillips wafer tek s/z w/ silver xylan #5251-621 | inquire |
| |
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 | 12-24 hex nut 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | T-Nut (Tee Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 9/16 | 1/4-20 x 9/16 t-nut 4-prong ss | 700 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 3/4 | 7/16-14 x 2 3/4 hex hd cs ss f593c | 50 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M8 | flat washer black oxide a2 m8 black oxide din 125a | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 phillips pan m/s 316ss | 2000 |
|
| Brikksen | FL | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 | fender washer a2 m8 din 9021 | 26000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/2 | 1/4-20 x 1-1/2 flat soc cs ss | 100 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M2-0.40 x 6 | phillips pan head machine screw a4 ph m2-.40 x 6 din 7985 | 52000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 4 | slotted cheese head machine screw a2 m3-.50 x 4 din 84 | inquire |
|
| Brikksen | FL | Service & Repair Kits (Bolt Packs) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3 | 5/16-18 x 3 carriage bolt 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12 | split lock washer a2 (1.4310) m12 din 127b | 11000 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4-7 x 6 1/2 | 1-1/4-7 x 6-1/2 f/t stud b-7 w/2 nuts stl teflon | 28,000 |
|
| Hewes | NY | Flat Washer | Steel | Zinc/Black | M10 | M10 uss flat washer _x000d_zinc black chromate din 125 | 1375 |
|
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 1/4 (.031-.062) | cherry cr3523-8-13 vechecr3523-8-13 | 100 |
|
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 5/32 (.251-.312) | cherry cr3242-5-08 vechecr3242-5-08 | 3000 |
|
| Century | FL | pem f-440-2 cfl-440-2 f-440-2 | 662 |
| ||||
| Century | FL | Socket Head Cap Screw | Class 8.8 | Plain | M5 x 35 | m 5.0 x 35.0mm grade 8.8 socket hd cap screws din 912 | 385 |
|
| Century | FL | Solid Rivet | ms20426-ad3-3-5 | 7380 |
| |||
| Century | FL | Hex Head Cap Screw | Grade 5 | Plain | 7/16-20 x 6 | 7/16-20 x 6 hex hd cap screw grade 5 steel plain | 9 |
|
| Century | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Plain | #8-32 | ms21043-08 | 16329 |
| |
| Century | FL | Internal Type HO Retaining Ring | Plain | parker #1300977 (id 1.318 od 1.630 nom) brazing ring anderton | 235 |
| ||
| Century | FL | Machine Screw | Steel | Plain | #6-32 x 3/4 | 6-32 x 3/4 phillips pan hd steel hex chrom free | 16500 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #5-40 x 3/8 | 5-40 x 3/8 low head socket cap hastelloy c 276 | 14 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 1/2 | 3/8-24 x 1/2 socket cap 304 stainless | 2 |
|
| Century | FL | pic design d40-093 | 300 |
| ||||
| FasSpcMfg | FL | Sockets | 7/16-14 x 2 1/2 | 7/16-14 x 2-1/2 socket set cup point alloy | 63 |
| ||
| FasSpcMfg | FL | Flat Head Socket Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #6-32 x 5/8 | 6-32 x 5/8 100 degree flat head socket cap screw17-4-ph condition h900 | 1 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | #10-24 x 4 1/2 | 10-24 x 4-1/2 hex cap 316 stainless full thread | 6 |
|
| Alma Bolt | MI | Shaker Screen Bolt | Grade 8 | Plain | 3/4-10 x 5 1/2 | 3/4-10 x 5 1/2 | shaker screen bolt grade 8 | 10 |
|
| Alma Bolt | MI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 6 | 5/16-18 x 6 full thread | st st hcs 18-8 | 98 |
|
| Alma Bolt | MI | Socket Head Cap Screw | Class 12.9 | Plain | M8-1.25 x 205 | m8 x 1.25 x 205 | socket head cap screw 12.9 din 912 | 5 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 3/8-16 x 5 | 3/8-16x5 grade 8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.5-1.50 x 150 | m10-1.5 x 150mm class 8.8 zinc cap screw din 931 | 100 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25-1.25 x 60 | m8-1.25 x 60m full threaded bolt cl 10.9 zinc din 933 | 50 |
|
| OneMonroe | MA | Coupling Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5/8 | 1/2-13 coupling nut stainless | 12 |
|
| OneMonroe | MA | Split Lock Washer | Steel | Zinc/Clear | 7/16 | washer split lock 7/16 steel zink | 175 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M10-1.50 x 70 | m10-1.5 x 70mm cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| American | WI | Dowel Pin | Steel | Plain | M20 x 24 | m20x24 dowel pin m6 free cutting steel din 7 | #N/A |
|
| Empire | WA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 button 6-lobe ss t27 pin-in | 600 |
|
| Field Fas | IL | Protective Caps & Plugs | Plastic | Plain | 1 1/2 x 1 5/8 | 1-1/2 x 1-5/8 black plastic tube cover supplied by adrian steel | 16568 |
|
| Irwin Ind | Ont | Button Head Socket Cap Screw | Steel | Plain | 7/16-14 x 1 | 7/16-14 uncx1 socket button head screw b18.3 | 250 |
|
| Irwin Ind | Ont | Socket Head Cap Screw | Steel | Plain | M2.5 x 8 | M2.5x8 steel plain din 912 | 800 |
|
| Komar | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 3/8 | #10 x 3/8 phillips round t/s type-b zinc |
| |
| Longhorn | TX | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 3/4 | 3/8-16 x 3/4 hex cap gr 2 zinc | 970 |
|
| Raw Produ | NJ | Carriage Bolt | 316, 317, A4 Stainless | Plain | 1/4-20 x 3 1/2 | carriage bolts 316 ss 1/4-20 x 3-1/2 ft | 471 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 9/16-12 x 1 1/2 | hex cap screws grade 8 9/16-12 x 1-1/2 ft | 127 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 1 1/4-7 x 8 | hex cap screws grade 8 1-1/4-7 x 8 pt | 500 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #0-80 x 3/8 | socket cap screws 316 ss #0-80 x 3/8 | 2033 |
|
| Raw Produ | NJ | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 3/4-10 x 6 1/2 | structural bolts a325 plain 3/4-10 x 6-1/2 | 500 |
| |
| Raw Produ | NJ | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | fastgrip 300 ss sp with 1/2 od bonded washer-brown-#9 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 1/2 | torx tp button ms 304 ss #8-32 x 1-1/2 | 962 |
|
| Raw Produ | NJ | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-20 x 1 3/4 | hex tap bolts 304 ss 1/2-20 x 1-3/4 | 185 |
|
| Raw Produ | NJ | Lock Nut, Nylon Insert | Grade 8 | Plain | 1/4-20 | nylon lock nuts grade 8 1/4-20 | 545 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 4 3/4 | hex cap screws grade 5 zinc 3/4-10 x 4-3/4 pt | 39 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3 1/4 | socket cap screws 304 ss 3/4-10 x 3-1/4 | 46 |
|
| Raw Produ | NJ | Hex Jam Nut | Steel | Zinc/Clear | 1-14 | hex jam nuts zinc 1-14 | 221 |
|
| QCS | OR | Flat Head Socket Cap Screw | Steel | Plain | 1/4-20 x 4 | 1/4-20x4 flat soc cap screw alloy | 200 |
|
| Fastener | OH | Machine Taps | Steel | M5-0.80 | mm hss p tap 5 x 0.8 | 12 |
| |
| Fastener | OH | Hex Machine Bolt | Grade B8 | Plain | finished hex head bolt partial thread 3/8-16x2-1/4 checked go/no-go a193 b8 | 20 |
| |
| Fastener | OH | Set Screw (Socket Head) | Steel | Zinc/Clear | 5/16-18 x 7/8 | flat point set screw 5/16-18x7/8 b7 zinc plated | 51 |
|
| Fastener | OH | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | #228 | o-ring #228 buna n | 80 |
|
| Fastener | OH | Hex Head Cap Screw | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M8-1.25 x 20 | hex head cap screw m8-1.25 x 20mm gr 10.9 magni 565 tan | | 192 |
|
| Wurth Ind | IN | Hex Head Cap Screw | Grade 8 | Plain | 1 x 1/4 x 3 1/2 | hex cap screw grade 8 pl 1 1/4-7x3 1/2 plain | 220 |
|
| Wurth Ind | IN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | flat head machine screw 82 ph 8-32x5/16 300 stainless (a1,a2, 18-8,304,310 etc.) plain | 51803 |
|
| Wurth Ind | IN | Hex Jam Nut | Grade 5 | Zinc/Clear | 5/16-24 | hex jam nut grade 5 zn 5/16-24 zinc/clear | 1750 |
|
| National | Ont | 3/8-16 mandrel | 1 |
| ||||
| WINA | MN | External Thread Insert, Self-Tapping Insert | Steel | Zinc/Yellow | M3.80 | threaded insert flt oe st a3c 3.80 7.90 m10 | 1000 |
|
| WINA | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 12 x 1/2 | hex washer head type-ab sheet metal screw st zn slotted 12x1/2 | 60930 |
|
| WINA | MN | Slotted Hex Nut | Aluminum | Non-Electrolytic Zinc & Aluminum Flakes + Matrix | M1-8.00 | slotted hex nut gr2 zfshr 1-8 | 300 |
|
| Mansco | MI | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 1/8 ext retaining ring e-style blk phos rotor clip | 2000 |
| |
| Mansco | MI | Machine Screw | Steel | Zinc/Black | #6-32 x 1 1/4 | 6-32x1-1/4 flat phil m/s triv blk znc | 3061 |
|
| Mansco | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | .140 x .472 x .394 | .140 idx.472 odx.394 lng cylindrical ferrite core | 9904 |
|
| Mansco | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 6-20 x 3/8 flat phil ty-ab triv znc | 10429 |
| |
| Mansco | MI | Flat Washer | Steel | Black Oxide | .406 x .875 | .406 idx.875 odx.125 thk (m10) hardened f/w blk ox | 6 |
|
| Mansco | MI | Brackets & Supports | Plain | .99 x .99 x 11ga seat mounting bracket plain | 9863 |
| ||
| Alma Bolt | MI | Electrical Lugs & Terminals | Copper | 1/0 | #11728 1/0 copper butt connect | au-ve-co part | null |
| |
| Hodell | OH | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 1 1/8-8 x 3 3/4 | 1 1/8-8 x 3-3/4 a193 b7 hvy hex bolt | | 8 |
|
| Hodell | OH | Hex Machine Bolt | Grade A | Plain | 7/8-9 x 7 1/2 | 7/8-9x7 1/2 a307 hex bolt plain | 33 |
|
| AFI | FL | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 2 | 3/16x2 roll pin 420 ss () () | 5923 |
|
| AFI | FL | Wood Screw | Steel | Zinc/Clear | #8 x 1 1/4 | #8x1-1/4 phil flat wood screw st zn () () | 2500 |
|
| AFI | FL | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | ultrasonic insert plain brass () | 23362 |
| |
| Global Fa | TX | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/16 x 1/4 | #4-40x3/16x1/4 ss f-f round/standoff | 60 |
|
| Olander | CA | Swage Standoff | Brass | Zinc/Clear | 4-40 x 3/16 x 1/4 rnd swg standoff brass zn | 214 |
| |
| Olander | CA | Solid Rivet | Aluminum | Plain | unv hd rivet 2117-t4 al dich seal | 2095 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Zinc/Clear | 8-32 locking heli-coil ins rohs | 7034 |
| |
| Olander | CA | Hex Male/Female Standoff | Steel | Cadmium | 6-32 x 2 3/8 x 5/16 hex m/f stl cad plt | 103 |
| |
| Olander | CA | Round Spacer | Steel | Plain | 4 x 1 1/4 x 1/4 | 4 x 1 1/4 x 1/4 rd spacer nyl () () | 783 |
|
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Zinc/Clear | #2-56 | 1185-02cn172s 2-56 f/r heli-coil ins strip feed rohs () | 3000 |
|
| Olander | CA | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | #6-32 x 3.75 | 6-32 x 3.75in thd rod chamfer end stl zn () () | 14 |
|
| Century | NY | O-Rings & Quad Ring Seals (X-Rings) | b1821bh031c250n | 200 |
| |||
| Century | NY | std-1856 m screw screw-.250-20 x 1.00 lg hex. h | 750 |
| ||||
| Century | NY | slts-m4-8 | 6 |
| ||||
| Century | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 4 | M3x4 18-8 phil flat m/s w/patch din 965 | 32697 |
|
| Century | NY | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | ametek ao-508-n rev.c | 7338 |
| |
| Century | NY | Hex Head Cap Screw | Steel | Zinc/Clear | 5/16-18 x 1 3/4 hhcs 5/16-18 x 1 3/4 hex head cap screw steel zinc per astm b633 fe/zn 5 6-8um w/hi-temp patch to mil-f-18240 390f | 50 |
| |
| Century | NY | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10 x 3/4 | #10x3/4 indented hex-wa tek ii steel zinc plt | 167775 |
|
| Century | NY | richco plastics pgs-2 | 1500 |
| ||||
| Century | NY | richco plastics whc-1000-01 | 100 |
| ||||
| Century | NY | cherry cr9127-3-03 | 700 |
| ||||
| Century | NY | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 3-1/4 hhcs gr.5 zinc | 25 |
| |
| Century | NY | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | m3 x 12mm low profile hex shc m3 x 12mm low profile 6-lobe shcs ss304 | 1100 |
| |
| Century | NY | Flat Washer | Steel | Zinc/Yellow | flat washer flat washer .425x .847 x .098 spring steel thru har rc 38-45 .0003 zinc yellow | 300 |
| |
| Century | NY | cherry cr3213pr-6-08 | 40 |
| ||||
| Century | NY | Socket Head Cap Screw | Plain | nas1352c3-12 | 3700 |
| ||
| Century | NY | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 3 phillips flat hd-ms steel zinc plt | 1700 |
| |
| Century | NY | Machine Screw | Steel | Black Oxide | 6-32 x 3/8 phillips 100dg flat hd steel black ox | 5000 |
| |
| Fastener | OH | Hex Machine Bolt | Grade A | Plain | 5/8-11 x 2 1/2 | hex head bolt 5/8-11x2 1/2 a307 grade a plain | 7 |
|
| E-Z LOK | CA | External Thread Insert, Self-Tapping Insert | e-z coil threaded insert for metal-4-48x2d | 1492 |
| |||
| Hodell | OH | Slotted Round Nut (Shaft Nut) | Steel | Plain | 12 | bearing l/n n-12 | 45 |
|
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | splined nutsert steel tin zinc trivalent rohs 4-40 | 1750 |
| |
| Rapid | NY | Blind Rivet | Steel | Zinc/Yellow | hex body steel blind threaded insert 1/4-20 uncx.027-.165 grip open end zinc/yellow rohs | 31615 |
| |
| Rapid | NY | Semi-Tubular Rivet | Brass | Tin Plated | oval head brass semi-tubular taper hole .061x9/32 tin plate finish | 20250 |
| |
| Rapid | NY | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 1/2 | 90 degree countersink 300 18-8 304 steel 1/8x1/2 | 0.5039 |
|
| Rapid | NY | Rivet Nut (Rivnut etc.) | Steel | Zinc/Clear | 12 | flat hd steel rivet-nut open end keyed 6-32 thread x .010-.075 grip zinc i/a/w rev 12 NAS1329Z06K75 | 2783 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 5/32 x 7/16 | 100 degree countersink 2024-t4 alum. i/a/w rev 3 5/32 x 7/16 dichromate anod.-mil-a-8625 MS20426DD5-7D | 179.38170882073 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 3/16 x 1 1/4 | 100 degree countersink 5056-h32 alum. i/a/w rev 3 3/16 x 1-1/4 clear anodize/mil-a-8625 MS20426B6-20A | 0.8155 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | #4-48 | 4-48 light hex full height flexslot steel cad ii plated | 321 |
|
| SPC | TX | Lock Nut, Nylon Insert | Grade 5 | Zinc/Clear | 7/8-9 | 7/8-9 nu grade 5 nylon insert locknut steel zinc | 550 |
|
| Parker | AZ | Socket Head Cap Screw | ASTM A574 | Passivated | M8-1.25 x 12 | M8-1.25x12 socket head cap screw fully threaded a286 super alloy passivate made in u.s.a. | 4620 |
|
| Parker | AZ | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | 1/2-13x1 3/4 hex head cap screw a286 full thread passivate per 8407541-1 made in u.s.a. | 425 |
| |
| Parker | AZ | Machine Screw | Steel | Cadmium | #2-56 x 1/2 | 6-32 x .188 pan head mach screw cross recess fully threaded aly stl cad plated w/patch per nas4002 made in u.s.a. | 49900 |
|
| Hodell | OH | Hex Head Cap Screw | Class 8.8 | Plain | M12-1.75 x 25 x 933 | M12-1.75x25 hex c/s 8.8 d-933 pln | 96 |
|
| Hodell | OH | Hex Jam Nut | Steel | Galvanized | 5/8-11 | 5/8-11 lh jam nut hdg | 7 |
|
| Hodell | OH | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 3/8-16 x 3 1/2 | 3/8-16x3 1/2 grade 5 hex tap bolt zn | 125 |
|
| EFC | MO | fitting st flex iii 1/2 fits 3/8 ny/blk heyco 9146 | 850 |
| ||||
| Arden | WI | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/8-9 x 6 | 7/8-9x6 hcs gr8 zy | inquire |
|
| Arden | WI | Set Screw (Socket Head) | Steel | Black Oxide | M3-0.50 x 8 | M3x.5x8 hxsoc set cup blk | inquire |
|
| Arden | WI | Fully Threaded Stud (All Thread) | Steel | Plain | 1420 x 23 | 1420x23 stud full thread | inquire |
|
| THRDFAST | FL | Hex Head Cap Screw | Class 10.9 | Plain | M18-2.50 x 30 | hex c/s | 17 |
|
| THRDFAST | OK | Finished Hex Nut | Steel | Plain | 1 1/2-6 | hex nut b18.2.2 | 1 |
|
| THRDFAST | MS | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10 | nf-32 18-8 ss machine screw nut small pattern b18.2.2 b18.6.3 | 214 |
|
| THRDFAST | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 1 | 7/8-9x2 1/4 a325 type-1 str/b (no nut) b18.2.1 b18.2.6 | 1 |
|
| THRDFAST | AL | Screwdriving Insert Bits & Power Bits | #1 x 2 | in square drive bit | 9 |
| ||
| Valley Nu | WA | Hex Head Cap Screw | Grade 5 | Zinc/Black | 3/8-16 x 2 1/4 | nc gr5 hex c/s zb usa | 36 |
|
| Valley Nu | WA | Hex Jam Nut | Steel | Plain | 1-8 | nc hex jam nut pl | 226 |
|
| Valley Nu | WA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3/8 | nc 18-8 ss pan phil | 84 |
|
| Valley Nu | WA | Square Head Bolt | Steel | Zinc/Black | 1/2-13 x 4 | nc square bolt zb | 108 |
|
| Valley Nu | WA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1/2 | nc 18-8 ss hex | 267 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 3/8-8 x 11 | astm a193 gr. b16 all thread stud | 513 |
|
| Lightning | LA | Flat Washer | 316, 317, A4 Stainless | Plain | 1/2 | flat 316 ss | 4245 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Zinc/Yellow | 3/4-10 x 4 3/4 | astm a193 b7m all thread stud | 525 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
