FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Eye Bolt | Steel | Galvanized | 1/4 x 3 | eye bolt . dom.. | 3 |
|
| OneMonroe | NC | mini rotary | 10 |
| ||||
| Jackson | MS | Eye Bolt | Steel | Galvanized | 1/4 x 5 | eye bolt | 20 |
|
| Jackson | MS | Eye Bolt | Steel | Galvanized | 1/4 x 6 | eye bolt | 28 |
|
| Jackson | MS | Eye Bolt | Steel | Galvanized | 5/16 x 5 | forged eye bolt hot dip dom.. | 21 |
|
| OneMonroe | NC | key cylinder | 4 |
| ||||
| OneMonroe | NC | lazy susan turntables | 3 |
| ||||
| Jackson | MS | Masonry & Concrete Drill Bits | 3/8 x 10 | oal 8 useable sds-plus masonry hammer drill bit 160 pt | 60 |
| ||
| Jackson | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 7/8-9 x 2 1/2 | a325 h/b hot dip | 618 |
|
| Jackson | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 3/4-10 x 2 | a325 h/b | 1743 |
|
| Jackson | MS | Metal Drill Bits | 3/32 | cobalt drill bit jobber gold 135 point usa | 24 |
| ||
| Jackson | MS | Wire Rope Clamps, U-Bolt Clamps | Aluminum | Plain | 1/8 | cable press sleeve | 300 |
|
| Jackson | MS | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #48 | range 2 9/16-3 1/2 all 18-8 304 hose clamp 300 series ss | 2 |
|
| Jackson | MS | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #60 | eff. range 3-5/16-4-1/4 all 18-8 304 dixon hose clamp | 5 |
|
| Jackson | MS | Machine Dies | M12-1.75 | hexagon threading die | 2 |
| ||
| Jackson | MS | Machine Dies | M20-1.50 | fine hexagon threading die | 3 |
| ||
| Jackson | MS | Machine Dies | M20-2.50 | coarse hexagon threading die | 2 |
| ||
| Jackson | MS | Drywall Screw | Steel | Zinc/Clear | #8 x 1/2 | drywall mod. truss phillips sharp pt. | 11160 |
|
| Jackson | MS | Drywall Screw | Steel | Zinc/Clear | #8 x 1 | drywall mod. truss phillips sharp pt. | 6163 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | Grade 8 | Zinc/Yellow | 1/2-13 x 6 | nc tapp bolt z & y | 13 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16 x 3 | nc hex c/s | 618.8 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2 x 3 | nc hex c/s | 1470.97 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/8-12 x 2 | nf hex capscrew special order | 5 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 1 3/4 | nc hex c/s 18-8 ss | 800 |
|
| Jackson | MS | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M6-1.00 x 20 | M6x1.00x20 fl/b f/t john deere part # 19m7862 or equal din 6921 | 446 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | M5-0.08 x 16 | flat phil. m/s | 184 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | M6-1.00 x 12 | flat phil. m/s | 298 |
|
| OneMonroe | NC | strike | 45 |
| ||||
| OneMonroe | MN | Rod Ends, Heim Joints, Rose Joints | Plain | spherical rod end with stud and nyloy race | 1 |
| ||
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 | nc hex indented unslotted 18-8 s/s regular | 1235 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 | nf hex indented unslotted 18-8 s/s regular | 281 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3 | nf hex indented unslotted 18-8 s/s regular | 99 |
|
| Jackson | MS | Machine Screw | Silicon Bronze | Painted | #8-32 x 1/2 | nc hex unslotted indented m/s statuary bronze | 50 |
|
| Jackson | MS | Nut Driving Bits, Nutsetters | 1/4 | short 1 3/4 oal magnetic nut setter | 49 |
| ||
| Jackson | MS | Nut Driving Bits, Nutsetters | 5/16 long 2 9/16 oal magnetic nut setter | 44 |
| |||
| Jackson | MS | Nut Driving Bits, Nutsetters | 5/16 | long magnetic nut setter with patented recess part # ezl | 12 |
| ||
| Jackson | MS | Nut Driving Bits, Nutsetters | 5/16 | short 1 3/4 oal magnetic nut setter | 46 |
| ||
| Jackson | MS | Nut Driving Bits, Nutsetters | 5/16 | short magnetic nut setter with patented recess | 7 |
| ||
| Jackson | MS | Nut Driving Bits, Nutsetters | 3/8 | short 1 3/4 oal magnetic nut setter | 51 |
| ||
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | hex indented unslotted 18-8 s/s regular | 3635 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 8 | pan phil a-2 18-8 304 | 79 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 10 | pan phil a-2 18-8 304 | 100 |
|
| Jackson | MS | Nut Driving Bits, Nutsetters | 7/16 long 2 9/16 oal magnetic nut setter | 28 |
| |||
| Century | FL | Set Screw (Socket Head) | Steel | Plain | 00 | an565dc4h2 bag qty=100 | 133 |
|
| Century | FL | Cushioned Pipe & Tube Loop Clamp | volt cmc-0062-0096 clamp | 6693 |
| |||
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | heli-coil 1dm3.5 kato tnm-3.5x.6c-3.5 | 115 |
| ||
| Century | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1 1/2 hex hd cap screw 316 stainless steel | 110 |
|
| Century | FL | Solid Rivet | Passivated | 7 3/16 x 5/16 | nas1198-6-5 | 607 |
| |
| Century | FL | Curved/Wave Spring Washer | Steel | Zinc/Yellow | M6 | m6 steel zinc yellow m6 steel zinc yellow din 137b | 900 |
|
| Century | FL | Flat Head Socket Cap Screw | Class 12.9 | Cadmium/Yellow | M5 x 10 | m5 x 10 socket flat gr. 12.9 cad yellow (qq-p-416 ty ii cl 2) e2f iso 10642 | 100 |
|
| Century | FL | Hex Head Cap Screw | Grade 5 | Plain | 1/4-20 x 1 5/8 | 1/4-20 x 1-5/8 hex hd cap screw grade 5 | 98 |
|
| Century | FL | Split Cotter Ring, Split Ring, Ring Cotter, Rue Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | aerofast r.625-ss split ring s/s | 97 |
| |
| American | NY | Machine Screw | Steel | Cadmium | 1/4-20 x 5/8 | slotted round cad pl | 6500 |
|
| American | NY | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1/2-13 | all lock nut plate | 800 |
|
| American | NY | Flat Washer | Steel | Cadmium | #10-.203 x .562 x .040 | flat cad pl | 1000 |
|
| American | NY | Machine Screw | Steel | Plain | #8-32 x 7/8 | phillips truss black | 12000 |
|
| American | NY | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | phillip pan type-23 tcs zp | 17600 |
|
| American | NY | Thumb Screw (Plain) | Brass | Plain | #8-32 x 1/4 | 8/32 x 1/4 knurled brass thumb screw black | 500 |
|
| American | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #3-56 x 3/8 | slotted round 18-8 304 | 1900 |
|
| American | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 3/4 | 1/4-20 x 1-3/4 phil oval stainless 18-8 m/s | 200 |
|
| American | NY | Self-Tapping Self-Piercing Screw | Steel | Zinc/Clear | #8 x 3/4 | #8 x 3/4 slot hex washer self piercing zinc pl | 8600 |
|
| American | NY | Machine Screw | Steel | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 tork t25 pancake .562 hd o.d np | 116035 |
|
| American | NY | Machine Screw | Steel | Plain | #8-32 x 1 1/4 | slotted pan m/s | 2750 |
|
| American | NY | Machine Screw | Steel | Zinc/Clear | #5-40 x 7/8 | 5/40 x 7/8 slot binding u/c m/s zp | 5000 |
|
| American | NY | Machine Screw | Steel | Plain | #10-24 x 7/16 | slotted binding m/s | 21000 |
|
| American | NY | Heavy Hex Nut | Steel | Plain | 1/4-20 | heavy hex nut black | 5000 |
|
| American | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 | slotted type-acorn hex m/s 18-8 304 black | 6400 |
|
| American | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 5/8 | 6/32 x 5/8 phil flat 100 degrees stainless | 4398 |
|
| American | NY | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 23/32 | slotted fillister 18-8 304 blk | 275 |
|
| American | NY | Carriage Bolt | Steel | Zinc/Clear | 1/2-13 x 6 1/2 | c/b pl | 170 |
|
| American | NY | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #8 x 1/2 | 8 x 1/2 phil flat self drill screw zinc pl | 3500 |
|
| American | NY | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 1 1/2 | 416 s/s | 100 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | 1 1/4-8 x 6 | 1-1/4-8x6 a193 b8 ss hvy hex bolt | 15 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8 | Passivated | 5/8-11 x 5 1/2 | 5/8-11x5-1/2 o/a a193 b8 class 2 ss all thread stud passivated a967 | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8 | Passivated | 3/4-10 x 5 1/4 | 3/4-10x5-1/4 o/a a193 b8 class 2 ss all thread stud passivated a967 | 2 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8 | Passivated | 1 1/8-8 x 6 1/4 | 1-1/8-8x6-1/4 o/a a193 b8 class 2 ss all thread stud passivated a967 | 3 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8M | Plain | 1/2-13 x 2 1/4 | 1/2-13x2-1/4 a193 b8m ss hvy hex bolt | 151 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 7/8-9 x 4 3/4 | 7/8-9x4-3/4 o/a a193 b8m ss all thread stud | 9 |
|
| SunPack | FL | Eye Bolt | Steel | Plain | 7/16-14 x 1 1/2 | 7/16-14x1-1/2 eye bolt with shoulder | 55 |
|
| SunPack | FL | Eye Bolt | Steel | Plain | 9/16-12 x 1 3/4 | 9/16-12x1-3/4 eye bolt with shoulder | 35 |
|
| SunPack | FL | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Galvanized | 1/2-13 x 3 | 1/2-13x3 j-bolt hdg | 3 |
|
| SunPack | FL | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Plain | 1/2-13 x 2 1/2 | 1/2-13x2-1/2 j-bolt sermagard 1105/1280 | 3 |
|
| SunPack | FL | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Plain | 1/2-13 x 3 1/4 | 1/2-13x3-1/4 j-bolt 1105/1280 sermagard | 1 |
|
| SunPack | FL | Lag Screw | Steel | Zinc/Clear | 3/8 x 1 1/2 | 3/8x1-1/2 lag bolt zinc | 140 |
|
| SunPack | FL | Lag Screw | Steel | Zinc/Clear | 3/8 x 3 | 3/8x3 lag bolt zinc | 640 |
|
| SunPack | FL | Lag Screw | Steel | Zinc/Clear | 3/8-16 x 4 | 3/8-16x4 lag bolt zinc | 24 |
|
| SunPack | FL | Toggle Bolt with Wings, Spring Toggle Anchor | Steel | Zinc/Clear | 3/16 x 4 | 3/16x4 toggle bolt zinc | 26 |
|
| SunPack | FL | Toggle Bolt with Wings, Spring Toggle Anchor | Steel | Zinc/Clear | 1/4 x 6 | 1/4x6 toggle bolt zinc | 22 |
|
| SunPack | FL | Toggle Wings | Steel | Zinc/Clear | #10 | #10 toggle wing zinc | 44 |
|
| SunPack | FL | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/8 x 3 | 1/8x3 cotter pin zinc | 198 |
|
| SunPack | FL | Castle Nut (Hex) | Steel | Zinc/Clear | 1/2-13 | 1/2-13 castle lock nut zinc | 5 |
|
| SunPack | FL | Coupling Nut | Steel | Galvanized | 1/2-13 x 1 1/2 | 1/2-13x1 1/2 carbon steel coupling nut hdg | 2 |
|
| Cal Fastenrs | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1/2 | hex c/s 18-8 304 | 100 |
|
| NAPPCO | TX | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 9 | sq set screw cup pt steel 3/4-10x9 (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) (15-SET SCREWS - SQUARE) | 4 |
|
| NAPPCO | TX | Handles | rectangular grip pull handle w/through | 125 |
| |||
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Plain | 5/64 x 5/16 | roll pin steel 5/64x5/16 | 1250 |
|
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 1/8 x 7/8 | roll pin steel zinc pltd 1/8x7/8 | 43 |
|
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Plain | 5/32 x 1 1/8 | roll pin steel 5/32x1-1/8 | 369 |
|
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Plain | 5/32 x 1 1/4 | roll pin steel 5/32x1-1/4 | 498 |
|
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 1/4 x 1 1/4 | roll pin steel zinc pltd 1/4x1-1/4 | 200 |
|
| NAPPCO | TX | Slotted Spring Pin (Roll Pin) | Steel | Plain | 5/16 x 1 1/2 | roll pin steel 5/16x1-1/2 | 1496 |
|
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/4-20 x 1 3/4 | 1/4-20 x 1-3/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 8055 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/4-20 x 2 1/4 | 1/4-20 x 2-1/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 100 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/4-20 x 3 1/4 | 1/4-20 x 3-1/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 2600 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 1/4 | 3/8-16 x 2-1/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 350 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 3/4 | 3/8-16 x 2-3/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 300 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 3/8-16 x 3 | 3/8-16 x 3 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 250 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 3/8-16 x 5 | 3/8-16 x 5 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 780 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 3/8-16 x 7 | 3/8-16 x 7 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 16 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/2-13 x 2 3/4 | 1/2-13 x 2-3/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 110 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/2-13 x 3 3/4 | 1/2-13 x 3-3/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 1875 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/2-13 x 4 1/4 | 1/2-13 x 4-1/4 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 520 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/2-13 x 7 | 1/2-13 x 7 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 445 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 5/8-11 x 5 | 5/8-11 x 5 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 20 |
| |
| Brikksen | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 5/8-11 x 6 | 5/8-11 x 6 wedge anchor with nut & | washer 316 stainless steel | washer 316 stainless steel | washer 316 stainless steel | 154 |
| |
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 2 | eye bolt turned 18-8 304 | 11 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 2 1/2 | eye bolt turned 18-8 304 | 15 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3 | eye bolt turned 18-8 304 | 1 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 3 1/2 | eye bolt turned 18-8 304 | 23 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 6 | eye bolt turned 18-8 304 | 4 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 6 1/2 | eye bolt turned 18-8 304 | 2 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 1 | eye bolt turned 18-8 304 | 1 |
|
| Jackson | MS | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 2 | eye bolt turned 18-8 304 | 2 |
|
| SRF | AL | Round Spacer | Nylon (Polyamide) | Plain | .188 x .375 x .25 | .188 id x .375 od x .25 thk spacer | 590 |
|
| SRF | AL | Screwdriving Insert Bits & Power Bits | Steel | 3/8 x 1 1/4 | non mag bit holder sq drive | - |
| |
| SRF | AL | Saw Blades | 8 | ft x 1/2 .020 24r 350 dragon | 6 |
| ||
| SRF | AL | Reciprocating Saw Blades | 87920 | variety pak recip saw blade SAN87920 | - |
| ||
| SRF | AL | Set Screw (Socket Head) | Steel | Plain | #8-32 x 1 | socket set cup pt | 1,730 |
|
| SRF | AL | Set Screw (Socket Head) | Steel | Plain | 3/4-16 x 3/4 | socket set cup pt | 55 |
|
| SRF | AL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 1-14 x 3 | hcs | - |
|
| SRF | AL | Machine Screw | Steel | Plain | #12-24 x 1 1/8 | slotted flat | 90 |
|
| SRF | AL | SAE Flat Washer | Nylon (Polyamide) | Plain | 5/16 | SAE flat | - |
|
| SRF | AL | Hairpin Cotter Pin (Bridge Pin, R-Clip) | Steel | Zinc/Clear | #228 | hitch (hair ) clip | 38 |
|
| SRF | AL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 8 | hcs s/s | 11 |
|
| SRF | AL | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 5 1/2 | slotted round | 153 |
|
| SRF | AL | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16 | external retaining ring s/s | - |
|
| SRF | AL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1 1/4-7 | thin nylon insert l/n | - |
|
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | M4.00 x 44 x 52 | 4.00 thk.x 44 id x 52 od o-ring | - |
| ||
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 65 | h/b a-2 18-8 304 f/t | 3 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 75 | h/b a-2 18-8 304 f/t | 1 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 130 | h/b a-2 18-8 304 partially threaded | 2 |
|
| Jay-Cee | MI | Installation & Setting Tools | rear thrust plate | inquire |
| |||
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 1/4 x 3/8 | nc round slotted m/s | 1310 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Plain | M20-1.50 x 30 | fine pitch hex c/s f/t | 1 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-1.50 x 160 | fine pitch hex c/s partially threaded | 7 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M18-1.50 x 30 | fine pitch hex c/s f/t | 7 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.00 x 75 | fine pitch hex c/s partially threaded | 2 |
|
| Jackson | MS | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M12-1.75 x 40 | h/b a-4 stainless | 30 |
|
| Jackson | MS | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M8-1.25 x 16 | fl/b din 6921 | 59 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #12-24 x 1 | nc hex indented m/s | 10 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 1/4 x 3/8 | nc hex washer indented m/s | 342 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 3/8 x 1/2 | nc hex washer indented m/s | 48 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #4-40 x 1/4 | round slotted m/s | 33100 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #4-40 x 1 1/4 | round slotted m/s | 475 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #4-40 x 1 1/2 | round slotted m/s | 1975 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 1/4 | round slotted m/s | 299 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 7/16 | round slotted m/s | 500 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 5/8 | round slotted m/s | 9030 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/4 | round slotted m/s | 1998 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/2 | round slotted m/s | 2000 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 3 | round slotted m/s | 2040 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Plain | M22-2.50 x 55 | hex c/s | 3 |
|
| SII | IN | Insulators | insulator & brush holder assembly | 2 |
| |||
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M18-2.50 x 55 | hex c/s | 18 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/4 | fillister slotted m/s 18-8ss | 154 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/4 | trim hex indented unslotted 18-8 s/s regular | 1764 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
