FCH Member Advertisement
FCH News
2 inch length Thread Rolling Screws (ASME B18. 6.4)
Thread Rolling Screws, also called Swageform Screws or Plastic Screws are designed to be screwed into a pre-formed hole in plastic. The form of the screw thread is such that the plastic is deformed by flowing around the thread rather than cut, and leads to a secure joint.
5 results, (click on any line for more information)
| Buy Thread Rolling Screws from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SII | IN | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 hex-unslotted drive indented hex washer head zinc finish steel thread rolling screw b18.6.4 | 125 |
|
| B & K FAST | PA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 5/16-18 x 2 | 5/16-18 x 2 hwh thread rolling screw thread form screws zinc b18.6.4 | 495 |
|
| JET FITTING | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 2 | thread forming screw pan torx 1/420x2 steel zinc plated b18.6.4 | 5400 |
|
| FACCA | Ont | Self-Tapping Thread Rolling Screw | Steel | Nickel Plated | 1/4-20 x 2 | thread rolling screw indented hex washer head 1/4-20 unc x 2 long hardened low carbon steel electroless nickel plated (use part #74990 to nickel plate) b18.6.4 | 220 |
|
| FACCA | Ont | Self-Tapping Thread Rolling Screw | Steel | Nickel Plated | 1/4-20 x 2 | thread rolling screw indented hex washer head 1/4-20 unc x 2 long hardened low carbon steel electroless nickel plated (use part #74990 to nickel plate) b18.6.4 | 220 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
