FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | best weld 350 deluxe outfit | 1 |
| ||||
| OneMonroe | NC | Plate Washer (Square & Rect.) | Steel | Plain | 1200-2 | 1200-2 lubriplate 14-1/2#10298 | 10 |
|
| OneMonroe | NC | Wrenches | 3/4 | 3/4 erection wrench for us regular nut | 2 |
| ||
| Shadran I | Hex Head Cap Screw | Class 8.8 | Plain | M12-1.75 x 40 | m12x1.75x40 hhcs 8.8 | 6 |
| |
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 1/4 | 7/16-14 x 1-1/4 skt hd c/s-s.s. | 21 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 1-14 x 5 1/2 | 1-14 x 5-1/2 gr.8 hx. hd. c/s-n.f.-yz | 5 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 3/8-24 x 1 3/4 | 3/8-24 x 1-3/4 gr.8 hx.hd.c/s-plain | 12 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 1 1/2-12 x 4 | 1-1/2-12 x 4 gr.8 hx.hd.c/s-plain | 4 |
|
| OneMonroe | MN | Flat Head Socket Cap Screw | Steel | Plain | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 flat hd skt c/s-kerr | 1400 |
|
| Shadran I | Hex Head Cap Screw | Class 8.8 | Plain | M12-1.75 x 60 | m12x1.75x60 hhcs 8.8 | 25 |
| |
| OneMonroe | MN | Blind Rivet | Aluminum | Plain | .126-.187 (.126-.187) | 1/8 al/al closed end rivet .126-.187grip jcsad43ah | 400 |
|
| OneMonroe | MN | Pipe Reducer | 1/4 x 1/8 | 1/4 x 1/8 90 deg reducer elbow | 10 |
| ||
| OneMonroe | MN | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/8 | 6-32 x 3/8 torx flat skt hd c/s-s.s. | 88 |
|
| OneMonroe | MN | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10/32 x 3/8 | 10/32 x 3/8 flat skt hd c/s-s.s. | 134 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 2 | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 gr.2 hx hd c/s-hdg | 772 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 2 | Plain | 1/2-13 x 1 3/4 | 1/2-13 x 1-3/4 gr.2 hx hd c/s-hdg | 135 |
|
| OneMonroe | MN | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 1 3/8 | 6-32x1-3/8 phillips pan hd type-23 stl hard zinc & bake sub for 93011-007 | 88000 |
|
| Shadran I | Service & Repair Kits | M12-1.75 | m12-1.75 long bolt assortment | inquire |
| |||
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 btn hd skt hd c/s-kerr | 25 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 btn hd skt hd c/s-kerr | 50 |
|
| OneMonroe | MN | T-Slot Machined Washer (Williams Washer, Zip Washer) | Plain | 5/8 | 5/8 williams/t-slot washer-plain | 75 |
| |
| Century | FL | Sems Machine Screw | Steel | Plain | #4 | #4 sae flat washer steel hex. chrom. free | 72662 |
|
| Century | FL | Flat Head Socket Cap Screw | ASTM A574 | Plain | #6-32 x 1/2 | 6-32 x 1/2 flat hd soc cap alloy stl | 665 |
|
| Century | FL | Internal Type HO Retaining Ring | Plain | brazing ring 400017-01 q5a rev-d parker 400017-01 | 6700 |
| ||
| Century | FL | pem fhs-m3.5-8 fhs-m3.5-8 | 2000 |
| ||||
| Century | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | m3 18-8 bn 672 din 127b | 4011 |
|
| Olander | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .260 x .490 x .050 | .260 x .490 x .050 f/w sst () () | 488 |
|
| Olander | CA | Round Spacer | Aluminum | Plain | #8 x 1/4 x 5/16 rnd spacer alum gold irr | 67 |
| |
| Olander | CA | Round Female/Female Standoff | Aluminum | Plain | 4-40 x 5/16 x 3/16 rd fem standofff alum | 2690 |
| |
| Olander | CA | 12 Point Flange Screw (CounterBore) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 1 1/2 | 5/16-24x1 1/2 12-pt bolt sst rohs () () | 90 |
|
| Olander | CA | Sems Machine Screw | Steel | Zinc/Clear | m4-.7 x 8 phil pan ext sems stl zn cr3 | 154 |
| |
| Olander | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #3 flat washer ss(105 x 250 x 016) | 2592 |
| |
| Olander | CA | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-32 thread rod sst rohs | () | 24 |
| |
| Olander | CA | Hex Female/Female Standoff | Brass | Zinc/Clear | 4-40 x 7/16 x 3/16 hex fem standoff brass zn | 662 |
| |
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1/4 | 1/4-28 x 1/4 soc set 1/2 dog pt sst rohs () () | 1208 |
|
| Olander | CA | Flat Washer | Steel | Zinc/Clear | M.406-1.000-.060 | f/w stl zn type iii .406-1.000-.060 () () | 374 |
|
| Olander | CA | Self-Clinching Stud | Steel | Zinc/Clear | thin hd self clinch stud stl zn () () | 783 |
| |
| Olander | CA | Ball Stud, Ball Pin | Steel | Zinc/Clear | ball stud stl zn non-rohs () | 1037 |
| |
| Century | FL | Blind Rivet | Plain | 3/32 (.126-.187) | cherry cr2662-3-02 vechecr2662-3-02 | 492 |
| |
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 3/4 | 1/4-20 x 1-3/4 shcs 18-8 s/s | 300 |
|
| GLF | OH | Cap Nut (Acorn Nut) | Grade 5 | Zinc/Black | 1/2-13 | 1/2-13 cap nut gr 5 stl bzn | 2154 |
|
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-2.00 x 90 | m14-2 x 90 hhcs cl 8.8 stl zc din 931 | 250 |
|
| GLF | OH | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3 x 20 | m3 x 20 phillips pan hd ejot pt screw stl zc bn13577 | 901 |
|
| GLF | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | #6-32 x 3/4 bhcs 18-8 s/s | 657 |
|
| GLF | OH | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50 x 50 | m10-1.5 x 50 hhcs cl 10.9 stl zc din 931 | 160 |
|
| GLF | OH | External Type E Retaining Ring (E-Clip) | Plain | x5133-9 retaining ring waldes | 3051 |
| ||
| GLF | OH | Finished Hex Nut | Steel | Galvanized | 1/2-13 | 1/2-13 fin hex nut stl hdg | 96953 |
|
| GLF | OH | U-Bolt | Steel | Zinc/Clear | 3/8-16 x 1/2 x 1 5/8 x 1 3/8 | 3/8-16 x 1-5/8 x 1/2 x 1-3/8 u bolt stl zc | 197 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain | 1/2-13 x 2 | 1/2-13 x 2 hex head cap screw asme | -309 |
|
| Hayes | CA | Wood Screw | Steel | Plain | #8 x 2 1/4 | #8 x 2 1/4 phil oval w/s bk/ox | 480 |
|
| Hayes | CA | Wood Screw | Steel | Zinc/Clear | #8 x 2 1/2 | #8 x 2 1/2 phil round w/s zinc | 1282 |
|
| Hayes | CA | Dowel Pin | Steel | Plain | 5/16 x 2 3/4 | 5/16 x 2 3/4 dowel pin alloy | 70 |
|
| Hayes | CA | Wood Screw | Steel | Zinc/Clear | #10 x 1 | #10 x 1 phil round w/s zinc | 900 |
|
| Hayes | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1 3/4 | 1/4-28 x 1 3/4 hex c/s 18-8ss | 101 |
|
| Hayes | CA | Dowel Pin | Steel | Plain | 3/8 x 1 1/2 | 3/8 x 1 1/2 dowel pin alloy | 194 |
|
| Hayes | CA | Sems Machine Screw | Steel | Zinc/Clear | #6-32 x 7/16 | 6-32 x 7/16 phil pan int sem screw zinc | 12547 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain | 1/2-13 x 4 | 1/2-13 x 4 hex head cap screw asme | 80 |
|
| Hayes | CA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 1/4 x 1 1/4 (#10-24) | 1/4 x 1 1/4 soc shoulder bolt alloy | 103 |
|
| Hayes | CA | Machine Screw | Steel | Nickel Plated | #8-32 x 1/2 | 8-32 x 1/2 phil oval m/s nickel | 2900 |
|
| Hayes | CA | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 3/8-16 x 6 1/2 | 3/8-16 x 6 1/2 f/thread stud 316ss | 20 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #6-32 x 5/16 | 6-32 x 5/16 phil truss m/s zinc | 4860 |
|
| Brikksen | FL | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 | m8 fender washer a2 / a2-70 din 9021 | 14850 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #10-24 x 2 | 10-24 x 2 phil pan m/s zinc | 2375 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #8-32 x 3 3/16 | 8-32 x 3-3/16 phil pan m/s zinc | 1267 |
|
| NutsBolts | NE | Pipe Elbow | 3/8T x 1/4 | 3/8t x 1/4m swivel push-in 90 |
| |||
| ASFCORP | MI | Coiled Pin (Spiral Spring Pin) | Steel | Plain | M3 x 12 | m3 x 12 std/med duty spiral pin hard stl r c 41-49 iso 8750 pkg | 276 |
|
| Bossard | AZ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | flatwasher stainless steel | 7900 |
| |
| Bossard | AZ | snap-top stainless penn engineering | 4570 |
| ||||
| Bossard | AZ | pfc2-832-50 w/phillips drive penn engineering | 3794 |
| ||||
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Black Oxide | #10-16 x 1 1/2 | #10-16x1 1/2 phillips pan full thread self drill bl black ox & oil self-drilling screws | 30000 |
| |
| Kanebridge | IL | Drywall Screw | Steel | Zinc/Clear | #8-15 x 2 1/2 | #8-15x2 1/2 ph bugle hi-low drywall zinc drywall screws | 25000 |
|
| CIF | IL | Hex Head Cap Screw | Grade 8 | Plain | 3/8-16 x 5 | 3/8-16 x 5 hex cap screw grade 8 plain | 3500 |
|
| CIF | IL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1-8 x 3 | 1-8 x 3 heavy hex bolt a325 plain | 136 |
| |
| CIF | IL | Hex Machine Bolt | Steel | Plain | 5/8-11 x 3.6675 | 5/8-11 x 3.6675 hex machine bolt 4140 cold drawn annealed 4 1/16 oal 1/8 hole drilled thru burr free | 81 |
|
| Optimas | IL | Hex Head Cap Screw | Class 10.9 | Phosphate | M20-2.50 x 65 | m20x2.5 x 65mm hex cap screw class 10.9 zinc phos/oil (i) iso 4014 | 4554 |
|
| SWACO | OH | Plow Bolt, Scraper Blade Bolt | Grade 5 | Zinc/Clear | 3/4-10 x 3 | 3/4-10x3 bolt plow bolt grade 5 #3 head plow bolt zinc (inch) | 15 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | ctm-3x.5srp-5h kato | 100 |
| ||
| SWACO | OH | Machine Screw | Steel | Plain | screw machine pan head phillips alloy cad ii nas623-3-7 | 950 |
| |
| SWACO | OH | Machine Screw | Steel | Cadmium/Yellow | #4-40 x .31 | screw pan head cruciform recess nas600-5p | 988 |
|
| SWACO | OH | Split Lock Washer | Steel | Zinc/Clear | M8 | m8 split l/w stl zinc din 127b | 6367 |
|
| SWACO | OH | External Type SH Retaining Ring | Steel | Plain | 5100-75stpa rotorclip waldes | 223 |
| |
| SWACO | OH | f12ncfma2-82 | 10 |
| ||||
| SWACO | OH | ae803 atlas power tool | 1 |
| ||||
| SWACO | OH | Set Screw (Socket Head) | Steel | Plain | #10-32 x 3/4 | #10-32x3/4 sock set sc cup stl mech | 590 |
|
| SWACO | OH | Finished Hex Nut | Class 8.8 | Zinc/Clear | M12-1.75 | m12-1.75 hx nut cl8 zp din 934 | 13548 |
|
| SWACO | OH | Hex Machine Bolt | Grade A | Zinc/Clear | 1/2-13 x 1 1/4 | 1/2-13x1 1/4 hx bolt a307 gr a zn | 103 |
|
| Accutite | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #10 x 1 1/2 | #10 x 1 1/2 phillips flat sms a 316 ss | 1350 |
|
| Accutite | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | 6-32 x 3/8 phillips flat type-23 tcs stl znc | 9120 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 116272 spring | 52 |
| ||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 124198 locator | 16 |
| ||
| AIH | AZ | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 5/8 (#6-32) | 5/32 x 5/8 shoulder bolt 18-8 ss | 200 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/32 x 9/16 | 3/32x9/16 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 7/16-14 x 2 3/4 | 7/16-14 x 2-3/4 gr.8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| Field Fas | IL | Flat Washer | Nylon (Polyamide) | Plain | .383 x .506 | .383 x .506 flat washer .031thk nylon | 5000 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck lockbolt collar (3lc-2r28g) | 242 |
| ||
| OneMonroe | MN | Weld Nut | Plain | #10-32 | round weld nut 10-32 | 1807 |
| |
| OneMonroe | MN | Self-Clinching Pin | Plain | captive part #-ch116-5x self-clinching pin crs plain pin dia-.116/length-.3125 | 90 |
| ||
| OneMonroe | MN | Machine Screw | Cadmium | #8-32 x .31 | nas602-5 | 400 |
| |
| OneMonroe | MN | Set Screw (Socket Head) | Plain | 3/8 x 5/8 | 3/8 x 5/8 sss cp ss | 6 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 2 | Tin Plated | 1/4 x 1 1/4 | 1/4 x 1 1/4 gr2 hhc tin | 1000 |
|
| OneMonroe | MN | Set Screw (Socket Head) | ASTM A574 | Plain | 1/4-20 x 3/16 | 1/4-20 x 3/16 socket set screws cup point alloy steel asme b18.3 | 35 |
|
| OneMonroe | MN | Service & Repair Kits | M6 | conversion kit metric m6 | 3 |
| ||
| MWRAF | CT | raf electronics part 8110-632-s-12 1/4 od x 3.00 lg x 1.00 ht | 2057 |
| ||||
| OneMonroe | MN | Set Screw (Socket Head) | Plain | M12-1.75 x 80 | m12-1.75 x 80 soc set-cup pt | 50 |
| |
| OneMonroe | MN | SAE Flat Washer | Grade 8 | Plain | #10 | #10 gr.8 sae flat washer-yz | 991 |
|
| OneMonroe | MN | Panel & Trim Clips (J-Clips, U-Clips) | Plain | auvecopak ford trim panel retainers | 2 |
| ||
| OneMonroe | MN | Flat Washer | Cadmium/Yellow | 0.219 x .438 x .049 | ms15795-708 | 108 |
| |
| OneMonroe | MN | Slotted Hex Nut | Steel | Zinc/Clear | 1 1/2-12 | 1 1/2-12 nf slotted hex nut zp | 13 |
|
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | Steel | Plain | 3/32 x 1 1/2 | 3/32 x 1-1/2 plain finish steel slotted spring pin | 760 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | o-ring epdm fda 70 durometer | 90 |
| |
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 3/4 | 10 x 3/4 sl hwh sts ab zp | 100 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Nickel Plated | M90 | pillow block for 90mm spherical od bearing tapped base nickel plated with grease groove | 55 |
| |
| OneMonroe | MN | Safety Glasses & Eye Protection | 5 | akita black frame indoor/outdoor lens 5 position ratchet extendable temple | 30 |
| ||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #4-40 x 1/2 | screw 4-40x1/2 phillips flat machine screw fully threaded 18 8 stainless steel black oxide 7000/ctn | 731 |
|
| OneMonroe | MN | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 14 x 3/32 x 1 | 14 x 3/32 x 1 arbor metal cut off wheel | 17 |
| |
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #4-40 x 3/4 | 4-40 x 3/4 phillips flat m/s plated | 14428 |
|
| OneMonroe | MN | Finished Hex Nut | Class 8.8 | Zinc/Clear | M8 | m8 hex nut cl 8 steel zinc din 934 | 73 |
|
| OneMonroe | MN | Set Screw (Socket Head) | Steel | Zinc/Clear | 3/8-16 x 3/8 | 3/8-16 x 3/8 skt set screw-zinc | 400 |
|
| OneMonroe | MN | Pipe Elbow | Brass | 1/2 | 1/2 45 deg. street elbow brass | 4 |
| |
| OneMonroe | MN | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 3/4 | 5/8-11 x3/4 hex cap screw stainless | 25 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 gr.8 hx hd c/s-yz | 150 |
|
| OneMonroe | MN | Electrical Wires & Cables | 22 | security & audio cable 22 awg 8c (str) 300v n/s jacket cmp cl3p color white brand belden 5506ue | 3000 |
| ||
| OneMonroe | MN | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Plain | 3/8 | 3/8 square drive pin-lock hex socket extension 3 oal 1/4 hex shank | 10 |
| |
| Alma Bolt | MI | Socket Head Cap Screw | Class 12.9 | Plain | M18-2.50 x 40 | m18 x 2.5 x 40 socket head cap screw 12.9 din 912 | 158 |
|
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 1 x 6 | 1 x 6 alloy dowel pin | 10 |
|
| Alma Bolt | MI | Eye Bolt | Steel | Plain | 5/8 x 3 5/8 | 5/8 x 3 5/8 (f/thd)(11/16ch) swing bolt (rod ends) | 213 |
|
| Alma Bolt | MI | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Plain | #4-40 x 1/4 | 4-40 x 1/4 pan head machine snake eye spanner security | 400 |
| |
| Alma Bolt | MI | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 3 | 5/16 x 3 st. st. spring roll pin | 85 |
|
| Alma Bolt | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Plain | #10-24 x 1 1/4 | #10-24 x 1 1/4 pan phillips type-f thread cutting | 3396 |
| |
| Alma Bolt | MI | Snap Fasteners (Snap Studs, Snap Caps, etc.) | Brass | Black Oxide | brass/black oxide socket snap fastener | 1000 |
| |
| Alma Bolt | MI | Sleeve Anchor | Plain | 5/16 x 2 1/2 | 5/16 x 2 1/2 #5010 lok-bolt | 706 |
| |
| Alma Bolt | MI | Pipe Plugs (Square Head) | Galvanized | 2 | 2 square head pipe plug galvanized | 11 |
| |
| Alma Bolt | MI | Lock Nut, Nylon Insert | Plain | 1 3/4-5 | 1 3/4-5 uss heavy (49ntu-285) nylon insert jam nut | 282 |
| |
| Bossard | AZ | bag anti-static 1 pocket 6 x 2 | 5 |
| ||||
| Optimas | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 unslotted hex head tapping screw 410 ss type f | 876 |
|
| Hybroco S | MI | Button Head Socket Cap Screw | Steel | Black Oxide | 5/16-18 x 7/8 | 5/16-18 x 7/8 bhscs blk ox | 1250 |
|
| AFT Faste | TX | Gloves & Hand Protection | l | the boss quality split cowhide leather palm glove size large (12 pairs) | 2 |
| ||
| AFT Faste | TX | Socket Head Cap Screw | Steel | Plain | M4-0.70 x 14 | M4-0.70x14 fully threaded socket head cap screw 12.9 coarse alloy iso 4762 / thermal bl (100/pkg.) din 912 | 21 |
|
| AFT Faste | TX | Dust, Respiratory, Surgical Masks & Breathing Protection | kn95 protective mask (50/box) | 1 |
| |||
| AFT Faste | TX | Flat Washer | Steel | Zinc/Clear | M16 | M16 flat washer zp din 125a | 815 |
|
| Coburn Myers Fastening Systems | PA | Fully Threaded Stud (All Thread) | Grade 2 | Galvanized | fully threaded stud (all thread) grade 2 galvanized | 702 |
| |
| Siena | IA | Hex Head Cap Screw | Class 8.8 | Black Oxide | M6-1.00 x 20 | M6x1.0x20 hex head cap screw steel 8.8black oxide full thread | 231 |
|
| AIH | AZ | Hitch Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | hitch lock pin s/s | 21 |
| |
| AIH | AZ | Split Lock Washer | Steel | Plain | lock washer | 736 |
| |
| AIH | AZ | Flat Washer | Steel | Plain | #0 | #0 narrow fw s/s MS51496P61 | 202 |
|
| FasSpcMfg | FL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 3/4-10 x 2 | 3/4-10 x 2 socket set cup point ni-cu 405 | 2 |
| |
| Eurolink | SC | Cap Nut (Acorn Nut) | 316, 317, A4 Stainless | Plain | M14 | m14 din 1587 a4 stainless steel acorn nut high type | inquire |
|
| OneMonroe | MA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 hex washer head slotted thread rolling screw zinc | 200 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | M3-.5-0.50 x 30 | m3-.5 x 30 phillips flat m/s pkg plated | 600 |
|
| Komar | IL | Sleeve Anchor | Steel | Zinc/Clear | 1/2 x 2 1/4 | 1/2 x 2 1/4 hex nut sleeve anchor zinc |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 5/8-18 x 6 1/2 | hex cap screws grade 8 5/8-18 x 6-1/2 pt | 42 |
|
| Raw Produ | NJ | Machine Screw | Silicon Bronze | Plain | #10-32 x 5/8 | slotted round head ms silicon bronze #10-32 x 5/8 | 1178 |
|
| Raw Produ | NJ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 3 1/2 | dowel pins 304 ss 3/16 x 3-1/2 | 100 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 | phillips ovalal head ms 304 ss #10-24 x 2 | 39 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 1/2-13 x 4 | hex cap screws hdg 1/2-13 x 4 pt | 307 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 35 | metric hex cap screws zinc 10.9 m8 x 1.25 x 35m ft | 320 |
|
| Raw Produ | NJ | Sems Machine Screw | Steel | Zinc/Clear | #10-24 x 3/4 | phillips pan head sems screw with internal tooth lock washer zinc #10-24 x 3/4 | 3608 |
|
| Raw Produ | NJ | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 | metric keps k lock nuts a2 ss m5 | 4389 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #4-40 x 5/16 | brass slotted round head ms #4-40 x 5/16 | 500 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | button head socket cap screws 304 ss #8-32 x 3/8 | 1493 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 3/8 | phillips truss head sms 304 ss #8 x 3/8 | 2841 |
|
| Raw Produ | NJ | Eye Bolt | Steel | Plain | M16-2.00 x 32 | metric shoulder pattern eye bolts carbon steel m16 x 2.0 x 32mm | 200 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | Steel | Plain | #10-32 x 3/16 | socket set screw cone point therm black alloy #10-32 x 3/16 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/8-18 x 5 1/2 | hex cap screws 316 ss 5/8-18 x 5-1/2 pt | 94 |
|
| AEROSPCE | MN | Self-Clinching Standoff | Steel | Plain | M6 | sos-m3-6 pem 6mm long thru-hole threaded standoff | 1090 |
|
| AEROSPCE | MN | dsos-440-275-07 pem d-sub mounting self-clinching | 295 |
| ||||
| AEROSPCE | MN | Hinges | hinge surface mount | 17 |
| |||
| F. Solutions | OH | Round Bar | 1 x 6 | round bar 1 x 6 17-4 h900 | 3 |
| ||
| F. Solutions | OH | Machine Taps | #8-32 | tap taper 8-32 | 8 |
| ||
| F. Solutions | OH | Socket Head Cap Screw | Steel | Cadmium | socket head cap screw 1/4-20 x 1/2 cadmium plated | 100 |
| |
| F. Solutions | OH | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 4 1/2 | full thread stud 5/8-11 x 4-1/2 304 ss | | 12 |
|
| F. Solutions | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M30-3.50 x 90 | hex head cap screw full thread ( ) m30-3.5 x 90mm 8.8 zinc plated | din 933 | 10 |
|
| National | Ont | Machine Screw | Steel | Zinc/Clear | 1/4 | lockwasher 1/4 cntsk ext tooth 1w 82 deg s-zp | 939 |
|
| National | Ont | Self-Tapping Thread Rolling Screw | Steel | Plain | M5-2.24 x 12 | m5x2.24x12 pan washer hd remform/pt ts st s451 | 1242681 |
|
| National | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 x 4 | m2x4 hex skt cs ft ss din 912 | 14 |
|
| AFI | FL | Flat Washer | Steel | Zinc/Clear | M8 | m8 flat washer st zn 8.4x20x2 () | 998 |
|
| AFI | FL | Round Spacer | Nylon (Polyamide) | Plain | nylon retaining spacer () | 2225 |
| |
| AFI | FL | Cable Clamps & Ties | Steel | Black Oxide | 14.8-120 | 14.8 -120 lb uv black cable tie () | 1600 |
|
| AFI | FL | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 | 1-72 hex ms nut ss () () | 1564 |
|
| Global Fa | TX | Self-Clinching Standoff | Brass | Nickel Plated | 1609-2 | 6-32x1/4x1in brassround/swage standoff nickelshank/length= .109 keystone electronics 1609-2 | 16 |
|
| Global Fa | TX | dzus spring fastener dzus ps35-zbb | 22 |
| ||||
| AFI | FL | pin/knuckle metric southco 96-51-420-11 | 404 |
| ||||
| IRF | NC | Split Lock Washer | Steel | Zinc/Clear | #6 | split lock stl | 59,600 |
|
| General F | MI | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 5/8-11 x 1 3/4 | 5/8-11x1.75 hhcs 8 zn nylon patchch b18.2.1 | 567 |
|
| Arden | WI | Sems Machine Screw | Steel | Plain | #8-32 x 5/16 | 832x5/16 phillips pn ext sems ms | inquire |
|
| Arden | WI | Flat Washer | Steel | Zinc/Yellow | .81 x 1.25 x .343 | .81x1.25 x.343 fw stl zy | inquire |
|
| Arden | WI | 329-720 | 329-720 ez-lok | inquire |
| |||
| Arden | WI | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1420 x 1 1/4 | 1420x1 1/4 hcs gr2 zc/patch | inquire |
|
| THRDFAST | AL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 18-8 ss hose clamp #62604 old #62602 | 32 |
| |
| THRDFAST | OK | Finished Hex Nut | Steel | Galvanized | 1 1/4-7 | hex nut hdg b18.2.2 | 15 |
|
| THRDFAST | OK | Hex Machine Bolt | Grade A | Galvanized | 3/8-16 x 2 1/2 | a307a h/b hdg domestic b18.2.1 | 1 |
|
| THRDFAST | MS | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 5/16 x 4 | b18.8.1 | 25 |
|
| THRDFAST | OK | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/2-6 | a194 2h hvy hex nut hdg b18.2.2 b18.2.6 | 24 |
|
| THRDFAST | AL | Coupling Nut | Steel | Zinc/Clear | 3/4-10 | reducing coupling nut 5/8-11 | 2 |
|
| Lightning | LA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1 1/4 | slotted hwh t/s zp | 1500 |
|
| Lightning | LA | Finished Hex Nut | Brass | Plain | #12-24 | hex nut | 400 |
|
| Lightning | LA | Hex Head Cap Screw | Grade B7M | Black Oxide | 3/8-16 x 1 3/4 | b7m c/s blk | 233 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 7/8-8 x 13 | astm a193 b7 all thread stud | 484 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | M8 x 158 (M6-1.00) | m8x15m8 soc sh/b blk | 50 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
