FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 3/8 | 6-32 x 3/8 phillips pan int l/w ss black ox 6-32 x 3/8 phillips pan internal lock washer sems stainles steel black oxide | 850 |
|
| Century | FL | Protective Caps & Plugs | Plastic | Plain / Furnace Black | 28 | alliance 28 .910 od tapered plug/cap plastic (blue) q2b | 850 |
|
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | M5-0.80 | t1084-5cw075 ins h-c m5x0.8 f/r tngls cin23 heli-coil t1084-5cw075 | 850 |
| |
| Century | FL | Fully Threaded Stud (All Thread) | Plain / Furnace Black | #10-24 x 3/4 | ohio nut & bolt hw1512 10-24 x 3/4 weld stud | 850 |
| |
| Century | FL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | pem pem# sp-m10-1 m10 insert ss sp-m10-1 | 700 |
|
| Century | FL | 12 Point Flange Screw (CounterBore) | null | Plain / Furnace Black | nas1191-08p10n screw cap | 837 |
| |
| Century | FL | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 hex hd tap bolt steel zinc plt | 800 |
|
| Century | FL | Blind Threaded Stud Insert (Stud Lok, Rivstud etc) | Steel | Zinc/Clear | 1/4-20 x 7/8 | pem 1/4-20x 7/8 self clinch stud zinc c420-14 | 800 |
|
| Century | FL | Blind Threaded Stud Insert (Stud Lok, Rivstud etc) | Steel | Zinc/Clear | 1/4-20 x 1 | pem fh-0420-16 ch420-16 1/4-20 x 1 stud zinc plated fh-0420-16 | 800 |
|
| Century | FL | Step Bolt | Steel | Zinc/Clear | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 step bolt steel zinc plt | 796 |
|
| Century | FL | CD Weld Stud | Copper | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20x1-1/2 flanged cd stud copper | 800 |
|
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 7.0 | m 7.0 steel zinc external tooth lock washers din 6797a | 202 |
|
| Century | FL | Signs & Labels | label connect diagram g20 xe | 150 |
| |||
| Century | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain / Furnace Black | ametek h6650-at-001 rev.cseal screw w/patch lok | 346 |
| |
| Century | FL | 7010516568 1in x 42in belt 3m () | 235 |
| ||||
| Century | FL | 3m463n10a57-6 clip assy | 366 |
| ||||
| Century | FL | ff rubber seal 32 foot section | 160 |
| ||||
| Century | FL | mcmaster carr 92196a204 | 493 |
| ||||
| Century | FL | s359dn12-8 strap retaining | 243 |
| ||||
| Century | FL | ff rubber seal 27 foot section () () | 1250 |
| ||||
| OneMonroe | NC | Machine Screw | Steel | Plain / Furnace Black | #10 x 3/4 | #10 x 3/4 torx pan hd sht met screw-plain | 300 |
|
| OneMonroe | NC | 3/8 x 6 eye ends | 8 |
| ||||
| OneMonroe | NC | 1/2 x 6 right hand eye end | 3 |
| ||||
| OneMonroe | NC | 5/8 x 9 rh eye end | 3 |
| ||||
| OneMonroe | NC | bumbercornergray | 1 |
| ||||
| OneMonroe | NC | bag mil-prf-121 type ii polykraft | 379 |
| ||||
| OneMonroe | NC | seal 90 durometer viton | 6500 |
| ||||
| OneMonroe | NC | Button Head Socket Cap Screw | Grade A | Black Oxide | M4-0.7-0.70 x 6 | m4-0.7 x 6mm hex drive grade a2-70 stainless steel button socket cap screw black oxide iso 7380 | 1000 |
|
| OneMonroe | NC | Machine Dies | Steel | 1/2 x 19 | 2 1/2 x 19 adj round die handle | 2 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | b | #b high speed bit | 2 |
| |
| OneMonroe | NC | rest button | 235 |
| ||||
| OneMonroe | NC | rest button | 4869 |
| ||||
| OneMonroe | NC | D-Rings | Steel | Plain / Furnace Black | 1 | x large 1 back d-ring quick connect legs and chest. | 1 |
|
| OneMonroe | NC | Deformed Bar Anchor Stud, Rebar | Steel | Plain / Furnace Black | #6 | 6 mini srd twin-leg fbh carab + st rebars | 1 |
|
| OneMonroe | NC | st/zc | 4488 |
| ||||
| OneMonroe | NC | 1/8 offset hanger-54-1028 | 8 |
| ||||
| OneMonroe | NC | solid brass lockset for wood doors edp# 11-0584 | 9 |
| ||||
| OneMonroe | NC | 2/pk coat and hat hook | 15 |
| ||||
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 2 | size 2 sp w/1/4-20 stud ss | 124 |
|
| OneMonroe | NC | size 2 modern ss 5/16-18 x1.26 | 226 |
| ||||
| MAINSOURC | NH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | cobham 511231 (8-32x3/4 captive soc sc ss) | 63 |
| |
| TownCountry | AR | Metal Drill Bits | 11/32 | hss stubby drills | 24 |
| ||
| MAINSOURC | NH | Machine Screw | Brass | Plain / Furnace Black | #0-80 x .30 | 0-80x.30 phil flat m/s mod brass silver | 75 |
|
| MAINSOURC | NH | Electrical Lugs & Terminals | concord 707-1604 (#4 solder terminal) | 321 |
| |||
| MAINSOURC | NH | CD Weld Stud | Steel | Plain / Furnace Black | M4 x 12 | cd weld stud flange m4x12 stl | 1200 |
|
| MAINSOURC | NH | CD Weld Stud | Copper | Plain / Furnace Black | weld stud cd no flange m5x10 stl copper | 100 |
| |
| MAINSOURC | NH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M2.5-0.45 | heli-coil 1084-2.5cn038 | 50 |
| ||
| MAINSOURC | NH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | heli-coil 1084-4cn080 | 500 |
| |||
| MAINSOURC | NH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | heli-coil 1185-06cn138 | 20 |
| |||
| MAINSOURC | NH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | heli-coil 1191-3cn285 | 39 |
| |||
| MAINSOURC | NH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | #4-40 | heli-coil 3585-04cn168 | 50 |
| ||
| MAINSOURC | NH | Electrical Lugs & Terminals | hh smith 1416-6 (#6 terminal lug) | 24 |
| |||
| OneMonroe | NC | Wire Lock Pin (Snapper Pin) | Steel | Plain / Furnace Black | 3/8 x 3 | snap pin 3/8 x 3 sq 2 wire | 4 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1-14 | gr 8 fin hex nuts zyd SAE j995 | 160 |
|
| XL Screw | GA | Split Lock Washer | Steel | Zinc/Yellow | 5/8 | alloy med split lock s zyd | 2,000 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 5/16-18 x 4 1/2 | hex c/s SAE j429 asme b18.2.1 (usa) | 300 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/8-16 x 7 1/2 | hex c/s SAE j429 zyd asme b18.2.1 | 200 |
|
| XL Screw | GA | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 8 | hex hd m/b long length undersize body astm a307 hdg | 100 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 1/2-13 x 5 | hex c/s SAE j429 asme b18.2.1 (usa) | 125 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 5/8-11 x 4 1/2 | hex c/s SAE j429 asme b18.2.1 | 100 |
|
| XL Screw | GA | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain / Furnace Black | 1/4 x 2 1/4 | ph flat concrete screws h t diamond point blue rusp 500 hr | 1,500 |
|
| XL Screw | GA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 3/4-10 | gr c prevailing torque lock nuts h t zp waxed | 400 |
|
| XL Screw | GA | Button Head Socket Cap Screw | Steel | Plain / Furnace Black | #6-32 x 3/8 | button hd socket c/s h t astm f835 class 3a thrd | 2,500 |
|
| XL Screw | GA | Square Nut | Steel | Zinc/Clear | 7/16-14 | regular square nuts zp | 1,000 |
|
| OneMonroe | NC | Solid Rivet | Aluminum | Plain / Furnace Black | rivet deckgem jrmagline | 2 |
| |
| OneMonroe | MN | Gloves & Hand Protection | xl | blue extra long latex large work glove | 1 |
| ||
| OneMonroe | NC | Blind Rivet | Aluminum | Plain / Furnace Black | cherry red gls55-3a0 | 1 |
| |
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | specia l order ! gojo white coconut skin cleaner-gallon | 1 |
| |
| OneMonroe | NC | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1 | 12 x 1slottedoval hd sht met screw-s.s. | 50 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | Plain / Furnace Black | axle shaft for steer wheels | 3 |
| ||
| OneMonroe | NC | Shaft Collars, & Adjusting Rings | Plain / Furnace Black | 3/8 | 1 3/8 2pc split sha ft collar | 3 |
| |
| OneMonroe | NC | Service & Repair Kits | gmsbnb1 hardware kit | 34 |
| |||
| OneMonroe | NC | Service & Repair Kits | gmsbnb2 hardware kit | 5 |
| |||
| OneMonroe | NC | Grommets & Eyelets | grommet poly/slotted adheisive-backed panel range .062-.099 natural 100 ft | 1 |
| |||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain / Furnace Black | M130 | 4-bolt special flange for 130mm standoffd brg e= 6 | 52 |
| |
| OneMonroe | NC | Machine Bushings | Plastic | Plain / Furnace Black | designed for 1-7/8 id round or square tube.minimum tube id 1.790 maximum tube id 1.850 comes with base washer plastic bushing rubber bushing and knurled nut. | 4 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain / Furnace Black | cstrswiv4x1-1/4 tpr1/2-13x1 stm del brg | 4 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain / Furnace Black | cstrswiv5in tpr1/2-13x1 stmdel brg | 4 |
| ||
| OneMonroe | NC | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1 1/4 | 12 x 1-1/4 truss phillips sms-s.s. | 200 |
|
| OneMonroe | NC | Pipe Nipple | Steel | Galvanized | 3/4 x 1 1/2 | 3/4 x 1-1/2 galv steel nipple | 5 |
|
| OneMonroe | NC | Wire Lock Pin (Snapper Pin) | Steel | Plain / Furnace Black | coil tension snap pin 1/2 x 4/1/4 | 2 |
| |
| OneMonroe | NC | Wire Lock Pin (Snapper Pin) | Steel | Plain / Furnace Black | 5/8 x 4 1/4 | coil tension snap pin 5/8 x 4-1/4 heavy | 2 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | 3/8-16 x 1 | glide base diameter 1-3/8 polyethlene base 3/8-16 x 1 threaded stem hex nut at stem base. | 1 |
|
| OneMonroe | MN | Gloves & Hand Protection | l | gardware cut-resistant ansi 3 x-large work glove | 3 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
