FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Blind Rivet | Plain / Furnace Black | cherry cr1921m05s04 vechecr1921m05s04 | 14664 |
| ||
| Century | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | .263/.257 x .375/.365 x .017 | shakeproof 1614-05-00-4102 1/4 special ext lock washer 410h s/s(.375/.365x.263/.257x.017 | 14545 |
|
| Century | FL | pem sosg-3.5m3-4 cfsosg-3.5m3-4 sosg-3.5m3-4 | 14300 |
| ||||
| Century | FL | Socket Head Cap Screw | Plain / Furnace Black | #4-40 x 1/2 | nas1352-04-8p | 5592 |
| |
| Century | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 5/8 | 4-40 x 5/8 socket button head cap screw 18-8 s/s dfars | 25000 |
|
| Century | FL | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain / Furnace Black | M6 | m6 thin locknut a4 normal/small pattern din 985 | 14012 |
|
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .281 x .625 x .050 | .281 x .625 x .050 f/w 18-8 1/4 commercial flat washer s/s | 14000 |
|
| Century | FL | Protective Caps & Plugs | Zinc/Green | caplug 341301ek rcl-5 pe-ld01 grn002 capplugs 341301ek capplugs 341301ek | 14000 |
| ||
| Century | FL | Coiled Pin (Spiral Spring Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | .125 x .375 | cldp.125x.375hcp hvy duty coil pin cldp.125x.375hcp hvy duty coil pin .125 x .375 420 s/s | 13725 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | #6-32 x 5/8 | 6-32 x 5/8 slotted fillister hd steel zinc plt | 13445 |
|
| Century | FL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | M8 x 20 | m8 x 20mm grade 8 hx cap screw full thread steel zinc din 933 | 13313 |
|
| Century | FL | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Black Oxide | #8 x 1 | #8 x 1in phillips flat particle board steel black ox | 13300 |
|
| Century | FL | Lock Nut, Nylon Insert | Plain / Furnace Black | #10-32 | ms21083n3 | 27228 |
| |
| Century | FL | m83485/1-020 | 223 |
| ||||
| Century | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | nas662c2llr3 | 220 |
| ||
| Century | FL | Hex Head Cap Screw | nas1611-029 | 100 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms28774-118 | 96 |
| |||
| Century | FL | Hex Head Cap Screw | ms9841-06 | 970 |
| |||
| Century | FL | a-55485/06-0005n mounting pad | 217 |
| ||||
| Century | FL | m55155/12xi11 | 216 |
| ||||
| OneMonroe | NC | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 1 1/4-12 | 1-1/4-12 zinc finish nte grade 2 jam nylon insert lock nut | 2 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1/2 | 8-32 x 1/2 slottedround m/s stainless | 66 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 1 3/8-12 | 1-3/8-12 zinc finish nte grade 2 jam nylon insert lock nut | 3 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 8-32 x 3/8 slotted fill ms stl special plate per cole hersee spec blkni-1. prepare surface for plate 2. copper underplate tkness .00005 min 3. sulfamate nickel underplate qq-n-290 cl 1 rev a tkness .0008-.0011 4. black nickel mil-p-18317 (rohs3/weee compliant) rev 12/22/54 5. insp | 2500 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 8-32 x 3/8 slotted pan hd m/s stl znc | 726 |
|
| OneMonroe | NC | impak swivel lock fits 4 & 6 series standard top plate | 11 |
| ||||
| OneMonroe | NC | 4.2 x 13mm phl.wsh.hddr-b | 1 |
| ||||
| OneMonroe | NC | see new item 5602-1/2-ub-zn | 92 |
| ||||
| OneMonroe | NC | x2 footplate weldment 316ss | 1 |
| ||||
| OneMonroe | NC | ez viscosity 2 cup | 2 |
| ||||
| OneMonroe | NC | Flat Washer | ms27183-2 | 3782 |
| |||
| OneMonroe | NC | ez viscosity 3 cup | 1 |
| ||||
| OneMonroe | NC | 56105 locking patch no pellet | 406 |
| ||||
| OneMonroe | NC | center case | 9 |
| ||||
| OneMonroe | NC | center case | 26 |
| ||||
| OneMonroe | NC | striker-no holes | 473 |
| ||||
| OneMonroe | NC | Round Spacer | Aluminum | Anodized | 3/8 | 3/8 round spacer 7/16 length hole clearance .192 aluminum clear anodize | 10 |
|
| OneMonroe | NC | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .125 x .310 x .010 | seastrom sea 5610-10-10 #4fl nyl washer .125x.310x.010 | 450 |
|
| OneMonroe | NC | fastener pack | 10 |
| ||||
| OneMonroe | NC | 5631-12-25 | 1 |
| ||||
| Endries | WI | prg510-48 pulling head | 1 |
| ||||
| Endries | WI | 230 taped green bin | 5 |
| ||||
| Endries | WI | Steel | f-200 10-32 fingertight ii male fitting red | 2 |
| |||
| Endries | WI | bhkl750-401 .75 bundle diameter blind kurly lock | 2000 |
| ||||
| Endries | WI | Steel | 1513m-13a .020 high arbon spring clip delta silver | 497 |
| |||
| Bossard | AZ | Hex Jam Nut | Steel | Plain / Furnace Black | nut hex jam thin fine thread | 60 |
| |
| Bossard | AZ | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | disc 2 speedlok 60 grit r228 norton abrasives | 6389 |
| ||
| Bossard | AZ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | rev c flatwasher 18-8 stainless | 390 |
| |
| Bossard | AZ | Sems Machine Screw | Steel | Plain / Furnace Black | 6-32 x 5/16 ph pan hd w/ext sems | 3907 |
| |
| Bossard | AZ | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | disc 5 120 grit metalite r228 norton abrasives | 1300 |
| ||
| Endries | WI | Sems Machine Screw | Steel | Zinc/Clear | 1/4-20 x 3/8 | 1/4-20x3/8 phillips pan sems with internal tooth lock washer trivalent clear zinc | 1035 |
|
| Endries | WI | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | nl10spdp m10x.83 nord lock delta protekt zinc flake zinc (pairs) | 100 |
| |
| Endries | WI | Socket Head Cap Screw | Steel | Plain / Furnace Black | 7/16-14 x 1 1/2 | 7/16-14x1-1/2 socket head cap screw plain | 325 |
|
| Endries | WI | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | #10-24 x .475 | 10-24x.475 free run 2. 5d insert nitronic recoil 03605t | 2580 |
|
| Endries | WI | Slotted Spring Pin (Roll Pin) | Steel | Plain / Furnace Black | 1/4 x 1 | 1/4x1 slotted spring pin plain | 140 |
|
| Endries | WI | Linch Pin, Lynch Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | slp1000 1/4x1-1/4 18-8 304 steel lynch pin (wilson) | 78 |
| |
| Endries | WI | Socket Head Cap Screw | Steel | Black Oxide | #8-32 x 3/4 | 8-32x3/4 socket head cap screw chemical black oxide | 1640 |
|
| Endries | WI | Split Cotter Ring, Split Ring, Ring Cotter, Rue Ring | Steel | Nickel Plated | 1 | 1 split key ring nickel plated | 600 |
|
| Endries | WI | Sems Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | 6-32x3/4 phillips pan sems with external tooth lock washer trivalent clear zinc | 4000 |
|
| Endries | WI | Semi-Tubular Rivet | Steel | Nickel Plated | .119 x .278-.218 | .119x.278x.218 steel oval head semi-tubular rivet nickel | 61694 |
|
| Endries | WI | kq2p-07 1/4 plug | 490 |
| ||||
| Endries | WI | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12 x 90 | M12x90 class 8.8 hex head cap screw trivalent clear zinc din 931 | 5879 |
|
| Endries | WI | Pipe Coupling, Pipe Connector | Brass | Plain / Furnace Black | 68-612 3/8 | 68-612 (oe) 3/8 tubex3/4 male npt brass connector non-potable applications only | 219 |
|
| Endries | WI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3 x 16 | M3x16 a2 18-8 304 button socket head cap screw iso 7380-1 | 2161 |
|
| Endries | WI | Self-Clinching Nut | Steel | Zinc/Clear | M6-1-6 | cm6-1 m6 self clinch nut zinc | 900 |
|
| Endries | WI | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | fhs-m4-15 18-8 304 steel self clinch stud | 1000 |
| |
| Endries | WI | Steel | v-120a ring slinger | 80 |
| |||
| Endries | WI | Fuses & Holders | 003.0t x 125 | 0154 003.0t 125v 3 amp fuse block | 364 |
| ||
| Endries | WI | 369639 mqv-2/2 d-14 medium duty base connector galvanized | 30 |
| ||||
| Endries | WI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6-18 x 1 1/4 | 6-18x1-1/4 phillips flat 4 head type-a tapping screw trivalent clear zinc with white head | 85200 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
