FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Kanebridge | IL | Machine Screw | 316, 317, A4 Stainless | Plain | #10-32 x 1/2 | #10-32x1/2 6-lobe pan full thread ms 316 ss stainless steel machine screws | 30000 |
|
| NAPPCO | TX | Self-Tapping Thread Rolling Screw | Steel | Plain | #6-19 x 3/4 | phillips pan threadrollingscrsteelzp 6-19x3/4 | 3500 |
|
| CIF | IL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2 1/2 heavy hex bolt a325 plain | 142 |
| |
| CIF | IL | Pipe Cross | Steel | Zinc/Clear | 1/8-27 x 17.81 | 1/8-27 x 17.81 long x 11.10 across flats fitting steel zinc plated | 19 |
|
| CIF | IL | Service & Repair Kits (Bolt & Nut Packs) | Grade 8 | Phosphate | 3/8-16 x 1 1/2 | 3/8-16 x 1 1/2 hex bolt grade 8 rolled after heat treat zinc phos coating | 3361 |
|
| CIF | IL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 | m6 x 1.00 finished hex nut 18-8 stainless steel din 934 | 83366 |
|
| CIF | IL | Hex Head Cap Screw | Grade 8 | Plain | 1 1/2-6 x 8 | 1 1/2-6 x 8 hex cap screw grade 8 plain | 132 |
|
| CIF | IL | Heavy Hex Nut | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 | 3/4-10 heavy hex nut a194 blue teflon | 920 |
| |
| Optimas | IL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | .801 x .070 | .801 id x .070 thk o-ring buna 75 cl 5 per drawing (i) | 4645 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/8-11 x 6 1/4 | 5/8-11 x 6-1/4 hex cap screw gr 5 zinc triv 120/144 hr ss per dwg rohs ppap | 3794 |
|
| Optimas | IL | Expansion Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2.384 | 2.384 od concave expansion plug ss-aisi 304 (p) | 18882.736024022102 |
| |
| Brikksen | Cable Clamps & Ties | 6 | 6-40-uv-1000 6 inch cable tie 40# black | inquire |
| |||
| Brikksen | Hex Head Cap Screw | Steel | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 hex head cap screw asme | 600 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1191-6cn562 heli-coil insert | 615 |
| ||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | t1084-2.5c025 heli-coil insert | 1415 |
| ||
| SWACO | OH | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | gwz-1612 10-32 x 3/4 wld screw ss | 200 |
|
| SWACO | OH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/4 | 3/4 hx keys stl 6150 s. arm | 3 |
| |
| SWACO | OH | Flat Washer | Steel | Plain | .149 x .375 x .016 | washer flat nas1149dn616h | 891 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck hg-bom-08 gage bom swage & grip | 1 |
| ||
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #5-40 x 5/8 | 5-40 x 5/8 socket cap screw s/s | 848 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M12-1.75 x 55 | m12-1.75 x 55mm cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) din 6921 | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 1/4-20 x 3/8 | 1/4-20 x 3/8 gr.8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M8-1.25 x 65 | m8-1.25 x 65mm cl.10.9 frame bolt-non-indented-non-serrated-furnace black iso 4162 | 10000 |
|
| Field Fas | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #6 x 3/8 | #6 x 3/8 phillips pan self-drill screw stl zc | 10000 |
|
| Field Fas | IL | Oil Seals, Shaft Sealing Rings | Plain | 9007.476 | seal shaft 9007.476 | 5 |
| |
| Field Fas | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 | 3/8-16 x 1 soc button 18-8 ss | 400 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 2 | Zinc/Yellow | 5/8 x 4 | 5/8 x 4 gr2 hhc zy | 4 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #8-32 x 7/8 | 8-32 x 7/8 slottedround hd m/s-zp | 66 |
|
| MWRAF | CT | raf electronics part m1155-4007-b 10mm rd x 8mm x m4 thread | 6408 |
| ||||
| OneMonroe | MN | Hinges | 4 1/2 x 4 | 4-1/2 x 4 spring hinge-each | 38 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster/swivel/04x1-1/2 poly-olefin wheel/rb/plate/400# | 16 |
| |||
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 button head socket cap screw-steel/black | 536 |
|
| OneMonroe | MN | Handles | chest handle | 20 |
| |||
| OneMonroe | MN | Finished Hex Nut | Fiber | Plain | 1/4-20 | fiberglass hex nut 1/4-20 thread size 7/16 width 7/32 height | 50 |
|
| OneMonroe | MN | Round Spacer | Plain | spacer square | 53 |
| ||
| OneMonroe | MN | Handwheels | M80 | 80mm handwheelw/rh 12mm bore | 2 |
| ||
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 1/4 x 4 | 1/4 x 4 slotted truss ms zp | 60 |
|
| OneMonroe | MN | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Zinc/Clear | #6-32 x 1/2 | 6-32 x .500 ms torx w/pin/button steel/zinc | 450 |
|
| OneMonroe | MN | Knobs & Star Grips | Plastic | Plain | 2 | 2-arm knob thermoplastic 2 | 10 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 3/8-16 x 7/8 | 3/8-16 x 7/8 hex cap screw gr 5 yellow zn | 50 |
|
| OneMonroe | MN | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1 1/2 | 8-32 x 1 1/2 slotted 316 ss | 75 |
|
| MWRAF | CT | raf electronics part 3109-b-832-b 3/8 rd x 1/4 length | 3776 |
| ||||
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M8 x 30 | m8 x 30 shc 12.9 sc-1 coated | 23 |
|
| OneMonroe | MN | Hinges | 4 1/2 x 6 | 4-1/2 x 6 wide throw hinge prime coat | 6 |
| ||
| OneMonroe | MN | Hex Head Cap Screw | Class 8.8 | Plain | M22-2.50 x 70 | m22 x 2.5 x 70 hhc 8.8 sc-1 coated | 6 |
|
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | M10 x 40 | m10 x 40 alloy dowel pin din 6325 | 260 |
|
| Alma Bolt | MI | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 1 1/2 | 1/8 x 1 1/2 st. st. oversize fender washer | 492 |
|
| Alma Bolt | MI | Shoulder Bolt (Stripper Bolt) | Steel | Zinc/Clear | 5/8 x 3/4 (1/2-13) | 5/8 x 3/4 (1/2-13 thread) zinc socket shoulder screw | 30 |
|
| Alma Bolt | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Plain | #10-32 x 3/4 | #10-32 x 3/4 flat phillips type-f thread cut screw | 6900 |
| |
| Alma Bolt | MI | Solid Rivet | Steel | Plain | 3/8 x 3 1/4 | 3/8 x 3 1/4 round hd steel rivet | 190 |
|
| Alma Bolt | MI | Eye Bolt | Steel | Galvanized | 1-8 | 1-8 plain pattern hot dip galv drop forged machinery eye bolt | 8 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 2 | Plain | 7/8-9 x 1 1/2 | 7/8-9 x 1 1/2 hex hd mach bolt g2 | 166 |
|
| baier & m | SC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Class 8.8 | Plain | M5 x 10 | pan head screw with collar m5 x 10 steel grade 8.8-finish vda 235-104.25 | 22975 |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 2 | 10 x 2 square flat deck screw type-17 305ss with 4 nibs | 200 |
|
| Brikksen | FL | Carriage Bolt | 316, 317, A4 Stainless | Plain | M6-1.00 x 20 | carriage bolt a4 m6-1.0 x 20 din 603 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hex head cs ss 10 per box f593c | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #14 x 3 1/2 | 14 x 3-1/2 phillips flat tek 410ss #3 point | 1000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-9 x 3 1/2 | 7/8-9 x 3-1/2 hex hd cs ss f593d | 50 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 50 | low head (4mm) socket cap screw-10 per bag a2 m6-1.0 x 50 din 7984 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 1/2 | 10-32 x 1-1/2 phillips flat head m/s 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | 1/4-20 x 2 eye bolt ss turned | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 10 | phillips pan head machine screw a2 ph m8-1.25 x 10 din 7985 | inquire |
|
| Brikksen | FL | Slotted Spring Pin (Roll Pin) | Steel | Plain | 3/32 x 1/2 | 3/32 x 1/2 roll pin steel | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M20-2.50 x 180 | hex head cap screw partial thread a2 m20-2.5 x 180 din 931 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 3/4 | 8-32 x 3/4 ph ovalal m/s 316ss | 12000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/16 | 4-40 x 5/16 phillips pan m/s ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 110 | hex head cap screw partial thread a2 m16-2.0 x 110 din 931 | 10 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3 1/4 | 1/4-20 x 3-1/4 ph ovalal m/s ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 3/4 | 3/8-16 x 1 3/4 ph pan m/s ss | 1000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 3 | #12 x 3 phillips flat head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | Grade 5 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/4-20 x 3/4 | 1/4-20 x 3/4 hex head grade 5 steel/zinc magni 560 | inquire |
|
| Brikksen | FL | Toggle Bolt with Wings, Spring Toggle Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 | 1/4-20 snaptoggle heavy duty toggle bolt s/s 24021 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #8 x 1 1/2 | 8 x 1-1/2 phillips flat a ss/black xylan | 3000 |
|
| Bossard | AZ | Gaskets | emi gasket 1.15 | 10800 |
| |||
| Bossard | AZ | Lock Nut, Nylon Insert | Steel | Plain | locknut nylon insert 3/8-16 9/16wid | 1000 |
| |
| Optimas | IL | Springs (Compression) | 400 Stainless (405, 410,416,420,430 etc.) | .420 x 3/4 | .420 od x 3/4 free lgth x .042 wire dia compression spring ss | 171 |
| |
| Optimas | IL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | 10-32 x 1/2 flat head socket cap screw 18-8 ss pellet | 663 |
|
| American | WI | Socket Head Cap Screw | Steel | Plain | 3/4-10 x 3 1/4 | 3/4-10x3-1/4 nc soc hd c/s partial thread must be partial thread | 79 |
|
| American | WI | Pipe Coupling, Pipe Connector | Iron | 1/8 | 1/8 pipe coupling malleable iron 150# | 10 |
| |
| American | WI | Hex Jam Nut | Grade 2 | Galvanized | 1 1/2-6 | 1-1/2-6 nc fin hex jam nut gr 2 hot dip galv (tapped oversize) | 31 |
|
| Empower H | IL | Rigging Links (Master Links, Welded Rings, etc.) | Steel | Nickel Plated | r7non welded round ringnickel plated-die cast rust proof metalinside length-1 weight per 100-15 | 615 |
| |
| Coburn Myers Fastening Systems | PA | Hex Machine Bolt | 316, 317, A4 Stainless | Plain | hex machine bolt a4-70 stainless plain | 28 |
| |
| Coburn Myers Fastening Systems | PA | USS Flat Washer | Grade 8 | Zinc/Yellow | uss flat washer grade 8 zinc/yellow | 11 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex head cap screw class 8.8 plain | 203 |
| |
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/4-20 | 1/4-20 nylon insert ln ss/teflon wax | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 50 | hex head cap screw full thread a2 m8-1.25 x 50 din 933 | 2000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1/2 | 10-24 x 1/2 flat socket cap screw 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | split lock washer a2 (1.4310) m6 din 127b | 210000 |
|
| Brikksen | FL | Service & Repair Kits (Bolt Packs) | Silicon Bronze | Plain | 1/4-20 x 3 1/2 | 1/4-20 x 3-1/2 carriage bolt 655 silicon bronze full bodied partial thread 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #14 x 2 | 14 x 2 phillips flat type-a 18-8ss chrome plated/plastisol- | inquire |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 2 | 5/16 x 2 hex lag bolt ss | 9000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 x 40 | hex head cap screw full thread a2 m12-1.75 x 40 din 933 | 10000 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | Brass | Plain | #10-32 x 1 | 10-32 x 1 flat head socket cap brass | 50 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 1/4 | 10-32 x 1-1/4 flat head socket cap full thread 18-8 stainless | 1123 |
|
| OneMonroe | MA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75-1.75 x 30 | m12x1.75x30mm socket head cap screw s/s | 285 |
|
| OneMonroe | MA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 34 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 6 | 3/8-16 x 6 hex cap screw grade 2 plated | 26 |
|
| Empire | WA | Hex Head Cap Screw | Grade 8 | Plain | 1-8 x 6 1/2 | 1-8 x 6-1/2 nc gr. 8 cap scre | 16 |
|
| Empire | WA | Flat Washer | Steel | Plain | 5/16 (3/4 od) flat washer | 2269 |
| |
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Plain | 1 1/8-7 x 8 1/2 | 1-1/8-7 x 8-1/2 hex cap gr 8 plain | 11 |
|
| Raw Produ | NJ | Flat Washer | Steel | Plain | #12-24 x 1 1/2 | metalgrip sell driller roofing t5 screws w/o washer-slate-#12-24 x 1-1/2 | 500 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #6 x 1 1/2 | torx tp flat head sd 410 ss #6 x 1-1/2 | 1271 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 3/4 | phillips flat head sms 304 ss #6 x 3/4 | 37711 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 3 1/2 | hex cap screws 304 ss 3/8-24 x 3-1/2 | 161 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-9 x 2 1/4 | socket cap screws 304 ss 7/8-9 x 2-1/4 | 500 |
|
| Raw Produ | NJ | Eye Bolt | Steel | Galvanized | 1 1/2-6 x 24 | nut eye bolts pln hdg 1-1/2-6 x 24 n2014-24 | 200 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 1 1/2 | hex cap screws grade 8 3/4-10 x 1-1/2 ft | 78 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 17 | procap ss cap roofing screw 17 point-burgundy-#10 x 1 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 4 3/4 | hex cap screws grade 5 zinc 3/8-16 x 4-3/4 pt | 100 |
|
| Raw Produ | NJ | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 3/4-10 | nylon jam lock nuts 316 ss 3/4-10 | 500 |
|
| Raw Produ | NJ | Coupling Nut | Steel | Galvanized | 1/2-13 x 5/8 | coupling nuts hdg 1/2-13 | 500 |
|
| Fastenerc | OH | Flat Washer | Nylon (Polyamide) | Plain | .128 x .245 x .010 | .128 x .245 x .010 nylon special flat washer natural | 110250 |
|
| AEROSPCE | MN | Blind Rivet | Steel | Plain | sd42bs pop rivet steel/steel sd42bs | 250 |
| |
| AEROSPCE | MN | bso-8632-26zi pem .812long#8diaref#nas1129-86-b-26z | 6000 |
| ||||
| National | Ont | Weld Nut | Steel | Plain | M8-1.25 | weld nut s m8x1.25 type-e projection | 202000 |
|
| National | Ont | Machine Screw | Steel | Plain | 28 x 16 x 5 | 28odx16idx5h oval comp limiter two legs | 29480 |
|
| National | Ont | Socket Head Cap Screw | Steel | Plain | #6-32 x 5/8 | 6-32x5/8 hx skt cs s | 100 |
|
| National | Ont | Countersink Cutters | Steel | t-bolt w/washer steel m6x1.0x20.6 s442 v718 gasket with psa | 105000 |
| ||
| National | Ont | Sems Machine Screw | Steel | Zinc/Clear | #10 x 1/2 | 10x1/2 pan phil ext sem 23 sz | 1565 |
|
| National | Ont | Flat Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #4 | #4 flat washers teflon | 10205 |
|
| Mansco | MI | Pipe Coupling, Pipe Connector | Nylon (Polyamide) | Plain | 5/8 x 5/8 x 3/8 | 5/8 x 5/8 x 3/8 hose connector pipe tee black nylon (gates 28636) | 2 |
|
| Mansco | MI | Flat Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | .500 x .880 x .310 | .880 idx.500 odx.310 thk f/w teflon virgin | 225 |
|
| Mansco | MI | Latches & Catches | 15.3 | mm longx11mm widex7mm thk push latch | 200 |
| ||
| Mansco | MI | Knives, Razors, Multifunction Tools | utility knife blades 50/dispenser 1/box | 2 |
| |||
| Mansco | MI | Turned, Ground & Polished Shafting | 1.247 x 1 | 1.247 odx1 long shaft extension drill 1/4-20 in (2) plac | 3 |
| ||
| AFI | FL | Round Female/Female Standoff | Steel | Plain | snap-top standoff () | 5898 |
| |
| AFI | FL | Flat Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M8 x 25 | m8x25 flat hd soc cs c10.9 st zn rohs din 7991 () | 1078 |
|
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | m5-.8 x 30 ph pan sst rohs | 555 |
| |
| Olander | CA | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 1/2 x 1/4 hex m/f standoff sst rohs | 265 |
| |
| Olander | CA | Round Spacer | Steel | Plain | spacer | 251 |
| |
| Olander | CA | Machine Screw | Steel | Plain | 1/4-20 x 1/2 slot rd nyl | 12 |
| |
| Olander | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 kep nut stl blk rohs () () | 716 |
|
| Olander | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | f/w sst .255-.407-.060 () () | 563 |
| |
| Olander | CA | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 3 | 5/16-24x3in thd rod sst rohs () () | 87 |
|
| Olander | CA | Hex Male/Female Standoff | Steel | Plain | #4-40 x 3/8 x 3/16 1/4 | 4-40x3/8x3/16 hex m/f 1/4 thd lgth () () | 1835 |
|
| IndexFast | CA | Internal Type HO Retaining Ring | Steel | Painted | brass painted 64-3360-4505 gripper 16ln/white bronze prong ring | inquire |
| |
| F. Solutions | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 3/4 | socket head cap screw 5/16-24(nf)x3/4 18.8 ss | 200 |
|
| ASFCORP | MI | USS Flat Washer | Steel | Plain | 7/8 | 7/8 uss flt wshr thru-hardened stl rc 38-45 pkg | 580 |
|
| THRDFAST | OK | Heavy Hex Nut | Grade 2H | Galvanized | 1/2-13 | a194 2h hvy hex nut hdg domestic b18.2.2 b18.2.6 | 14 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Plain | 1/2-13 x 3 3/4 | gr5 hex c/s b18.2.1 | 211 |
|
| THRDFAST | AL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | 5/8-11 x 5 | b8 ss hvy h/b b18.2.1 | 37 |
|
| THRDFAST | MS | Hex Jam Nut | Steel | Plain | 7/8-9 | hex jam nut b18.2.2 | 22 |
|
| THRDFAST | AL | Socket Head Cap Screw | Steel | Zinc/Clear | 3/8-16 x 2 | socket c/s b18.2.1 b18.3 | 42 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 3/4-10 x 8 | a307 gr.b heavy h/b tef blue | 16 |
|
| Lightning | LA | Heavy Hex Nut | Grade 2H | Zinc/Clear | 1 1/8-7 | astm a194 gr. 2h heavy hex nut | 404 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M27-3.00 x 140 | socket c/s | 684 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 5/8 x 1/2 (1/2-13) | soc sh/b | 726 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-8 x 16 3/8 | astm a193 b7 all thread stud teflon blue | 644 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
