FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Solid Rivet | Plain / Furnace Black | 1/8 x 5/8 | ms20426e4-10a | 425 |
| |
| Century | FL | Springs (Compression) | parker hannifin 4-2672-1 compression spring music wire | 2000 |
| |||
| Century | FL | Pipe Plugs (Socket) | m25988/1-161 bulk packaged | 57 |
| |||
| NutsBolts | NE | External Thread Insert, Self-Tapping Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 2d | 1/2-20 x 2d ss thread insert |
| |
| NutsBolts | NE | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Galvanized | 5/8 x 8 | 5/8 x 8 bent anchor bolt hdg w/nut |
| |
| NutsBolts | NE | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16 | 16m-2.0 x 65 ss shcs fully threaded |
| |
| NutsBolts | NE | #2 usa stubby (not nitro) |
| |||||
| NutsBolts | NE | Tension Control Bolt (F3125 Gr. F1852, F2280) | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 7/8-9 x 3 | 7/8-9 x 3 a490 tc bolt dacromet |
| ||
| NutsBolts | NE | Socket Head Cap Screw | null | Plain / Furnace Black | 7/8-9 x 3 1/4 | 7/8-9 x 3 1/4 shcs |
| |
| NutsBolts | NE | Sockets | 9/32 x 6 | 9/32 x 6 hex bit socket 3/8 drive |
| |||
| NutsBolts | NE | Lag Screw | Galvanized | 1/2 x 1 1/2 | 1/2 x 1 1/2 lag screw hdg |
| ||
| NutsBolts | NE | Ball Bearings, Balls, Bearing Mounts | Plain / Furnace Black | 1/2 x 3/4 x 1/2 | 1/2 x 3/4 x 1/2 flange bearing |
| ||
| NutsBolts | NE | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 1 | 5/16-18x1 hcs z5 | 81551 |
|
| Centennia | CO | Cable Clamps & Ties | holder tie cable press fit.312di hole.250 tk panel | 1 |
| |||
| NAPPCO | TX | Hex Female/Female Standoff | Nylon (Polyamide) | Plain / Furnace Black | 3/16 x 5/8 | 3/16x5/8 (4-40) hexfemale standoff-nylon | 10 |
|
| CIF | IL | Liner Bolt | ASTM A574 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-16 x 6 1/2 | 3/4-16 x 6 1/2 liner bolt alloy with 0.250 long dog point 36/43 magni 575 (black) | 985 |
|
| Optimas | IL | Socket Head Cap Screw | Class 10.9 | Plain / Furnace Black | M6-1.00 x 45 | m6-1.0 x 45mm socket head cap screw cl 10.9 black polyseal iii (i) din 912 | 441.96078491210903 |
|
| Optimas | IL | PC Board Supports & Spacers | 3/16 | reverse locking circuit board support 3/16 hole 3/8 l ppap | 7836 |
| ||
| Optimas | IL | Wing Nut | Brass | Plain / Furnace Black | 13/16-18 | 13/16-18 tube nut brass per drawing (p) | 850 |
|
| Optimas | IL | Double End Stud | Class 10.9 | Phosphate | M8 x 1.25 x 8 x 1.25 x 49.9 | m8x1.25 x m8x1.25 x 49.9mm oal hex flange double end stud class 10.9 zinc phos & oil per drawing (p) | 300 |
|
| Brikksen | FL | Socket Head Cap Screw | null | Plain / Furnace Black | M4-0.70 x 20 | m4-.7 x 20 hex socket head cap screw din | 15950 |
|
| Brikksen | FL | Machine Screw | Plain / Furnace Black | #10 x 1 1/4 | #10 x 1-1/4 phillips ovalal 82 degree | 198000 |
| |
| Brikksen | FL | Cotter Pin (Split Pin) | Plain / Furnace Black | 5/32 x 2 | 5/32 x 2 cotter pin asme b18.8.1 18.8 | 1000 |
| |
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | 1/2 commercial flat washer 18.8 | 893520 |
|
| Irwin Ind | Ont | Machine Screw | Steel | Black Oxide | #6-32 x 1 3/8 | 6-32 x 1-3/8 pan hd phillips m/s steel black oxide | 1000 |
|
| SWACO | OH | Machine Screw | Steel | Zinc/Clear | #10-24 x 3/4 | #10-24x3/4 ph pan ms stl zp | 370 |
|
| SWACO | OH | Handles | 7 | 7193 keystone handle ferrule | 38 |
| ||
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 5 | M3-.5x5 socket cap screw s/s | 8092 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 1/2-13 x 3 | 1/2-13x3 grade 8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| Field Fas | IL | Double End Stud | Plain / Furnace Black | 3/4-10 x 3 1/2 | 3/4-10 x 3 1/2 double end stud full bod | 2 |
| |
| Field Fas | IL | Electrical Switches | trigger switch asm | 6 |
| |||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain / Furnace Black | .875 | huck lockbolt pin (hlpp-r12-13pl) ( .750 / .875 | 3560 |
| |
| Field Fas | IL | Double End Stud | Steel | Plain / Furnace Black | 5/16-18 x 1.75 | 5/16-18 x 1.75 double end stud 3/4 thread one end and 1/2 thread other end 1045 stl pln rc 28-40 | 47 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-8 x 6 1/2 | 1-8 x 6 1/2 l-7 stud blue teflon coated | 4 |
|
| OneMonroe | MN | External Type SH Retaining Ring | Plain / Furnace Black | button/snap ring/for load bars | 25 |
| ||
| OneMonroe | MN | Knobs & Star Grips | Aluminum | 1/4-20 | alum domed knurld knobs 1/4-20 | 23 |
| |
| OneMonroe | MN | Thrust Washer | Plain / Furnace Black | 3.658 x 4.812 x .055 | 3.658 x 4.812 x .055 thrust lockwasher spec 46a | 2 |
| |
| OneMonroe | MN | Self-Tapping Thread Rolling Screw | Steel | Zinc/Yellow | #8-32 x 5/8 | 8-32 x 5/8 phillips pan head thread rolling screw zinc & yellow | 692 |
|
| OneMonroe | MN | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #12-24 x 1/2 | screw 12-24x1/2 phillips pan thread cutting screw type-23 fully threaded zinc 5000/ctn | 2099 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain / Furnace Black | 5/16-18 x 1 | 5/16-18 x 1 shc drilled .046 x .094 ctr to top | 4 |
|
| OneMonroe | MN | USS Flat Washer | Grade 8 | Zinc/Yellow | 1 | 1 gr8 uss fw zy | 8 |
|
| OneMonroe | MN | Cushioned Pipe & Tube Loop Clamp | desk clamps | 100 |
| |||
| OneMonroe | MN | Hinges | 2 x 96 | 901 crs 2 x 96 hinge | 15 |
| ||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2-0.40 x 4 | m2-.4 x 4 sl cheese m/s w/patch a2ss din 84a-650650 | 100 |
|
| OneMonroe | MN | Split Lock Washer | Plain / Furnace Black | lockwasher | 18 |
| ||
| OneMonroe | MN | Hairpin Cotter Pin (Bridge Pin, R-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-5/16 | stainless steel hitch pin clip (for shaft 1/4-5/16 ) | 60 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2-56 x 1 1/4 | 2-56 x 1 1/4 phillips pan m/s stainless | 100 |
|
| OneMonroe | MN | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Plain / Furnace Black | 3/4 | 3/4 ball bearing wide inner ring set screw locking l2 seals | 320 |
| |
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 x 3/4 | 3/8-24 x 3/4 nf shc 594-b yellow-dykem | 90 |
|
| OneMonroe | MN | Pipe Tee | 3/8 x 1/4 | 3/8 tube x 1/4 npt composite male branch pipe tee dot push-in | 30 |
| ||
| OneMonroe | MN | Carriage Bolt | Grade 2 | Plain / Furnace Black | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 cge bolt gr 2 z/cl | 23 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M5-0.80 x 110 | m5-0.8 x 110mm cl 12.9 plain socket head cap screw din 912 | 175 |
|
| OneMonroe | MN | Machine Bushings | Plastic | Plain / Furnace Black | designed for 1-1/8 id round or square tube.minimum tube id 1.030 maximum tube id 1.140 comes with base washer plastic bushing rubber bushing and knurled nut. | 28 |
| |
| Alma Bolt | MI | Threaded Rod | Steel | Zinc/Clear | 1 3/4-12 | 1 3/4-12 sae l.c. full thread rod zinc | 6 |
|
| Alma Bolt | MI | Flat Head Socket Cap Screw | ASTM A574 | Plain / Furnace Black | #6-32 x 3/4 | #6-32 x 3/4 flat hd socket cap screw alloy | 7294 |
|
| Alma Bolt | MI | SAE Flat Washer | Grade 9 | Zinc/Yellow | 5/8 | 5/8 sae zinc yellow flat washer grade 9 | 442 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 1/4-28 x 3 1/2 | 1/4-28 x 3 1/2 grade 8 ally hcs sae | 1293 |
|
| Alma Bolt | MI | Hex Machine Bolt | Grade 2 | Zinc/Clear | 3/8-16 x 5 1/2 | 3/8-16 x 5 1/2 hex hd bolt gr2 zp | 1523 |
|
| Alma Bolt | MI | Hitch Pin | Plain / Furnace Black | 1/2 x 2 | 1/2 x 2 (1 1/2 effective) cotterless hitch pin | 92 |
| |
| Brikksen | FL | Threaded Rod | Grade B8 | Plain / Furnace Black | 3/4-10 x 12 | 3/4-10 x 12 full thread rod a193 b8 | inquire |
|
| Brikksen | FL | Carriage Bolt | Steel | Galvanized | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 carr bolt hdg | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 10 | phillips pan head machine screw with level 4 ppap a2 ph m5-.80 x 10 nytemp patch din 7985 | inquire |
|
| Brikksen | FL | Clevis Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 1/2 | 1/4 x 1/2 clevis pin stainless steel | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 | flat washer-100 per bag a2 m8 din 125a | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 140 | socket head cap screw partial thread a2 m6-1.0 x 140 din 912 | 500 |
|
| Brikksen | FL | Finished Hex Nut | 316, 317, A4 Stainless | Plain / Furnace Black | M16-2.00 | hex nut-5 per bag a4 m16-2.0 din 934 | inquire |
|
| Brikksen | FL | External Type E Retaining Ring (E-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16 | e-clip for 5/16 shaft s/s (rotor clip part se-31ss) | inquire |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | 1/4-20 hex finish nut ss/chrome- | inquire |
|
| Brikksen | FL | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 | 6-32 x 1 flush head self clinching stud ss | 4000 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 x 10 | 5/8-11 x 10 carriage bolt 18-8ss w/6 thread | inquire |
|
| Brikksen | FL | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 | wing nut american form-10 per bag a2 m6-1.0 din 315 | inquire |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 | 6-32 nylon insert locknut ss 100 per box f-72box | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 ph pan tyf 18-8ss | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 5/16 | 6-32 x 5/16 button soc cs s/s | 1000 |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 2 1/2 | 10 x 2-1/2 6-lobe flat deck screw type-17 305ss w/nibs t25 | inquire |
|
| Brikksen | FL | Hex Jam Nut | Brass | Plain / Furnace Black | 3/8-24 | 3/8-24 hex jam nut brass | 6000 |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 | 5/8-11 hex finish nut ss/irr red wax | inquire |
|
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.25 | hex jam nut 1.25 pitch (type-b thin) a2 m10-1.25 din 439 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 3/8 | 8-32 x 3/8 phillips ovalal m/s ss | 18000 |
|
| Bossard | AZ | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | standoff keyhole stainless penn engineering | 17006 |
| |
| Bossard | AZ | Painter's Tape (Masking Tape) | tape hi-temp masking 18mm x 60 yds | 147 |
| |||
| Bossard | AZ | Electrical Lugs & Terminals | fork terminal nylon ins 18-14 awg panduit | 700 |
| |||
| Bossard | AZ | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | standoff blind stainless penn engineering | 24228 |
| |
| Bossard | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | insert 10-32x2 dia non locking heli-coil heli-coil | 17937 |
| ||
| Optimas | IL | Socket Head Cap Screw | ASTM A574 | Zinc/Black | #10-24 x 1.00 | 10-24x1.00 asme b18.3 low hd skt cap screw alloy zinc black scotchgrip 2353 | 5985 |
|
| HYBROCO | MI | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 3/8 x 5/8 (5/16-18) | 3/8 x 5/8 sock shld bolt | 450 |
|
| Delta | TX | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1 1/4 | c/s 18-8 sst | 836 |
|
| IndexFast | CA | Castle Nut (Hex) | Grade 5 | Zinc/Clear | castle nut (hex) grade 5 plain cn100f5sz 1-14 castle nut grade 5 zinc 027009k | inquire |
| |
| AIH | AZ | Grommets & Eyelets | grommet | 50 |
| |||
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 1 1/4 | 10 x 1-1/4 phillips flat a ss/epoxy lock | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 1 1/8 | 4-40 x 1-1/8 socket head cs 18-8ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 socket head cap screw 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hex head cs ss coated with fct-360 | inquire |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | #10-32 x 3 | 10-32 x 3 socket cap hastelloy c 276 full thread | 4 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain / Furnace Black | 3/8-16 x 5/8 | 3/8-16 x 5/8 socket set flat point ni-cu 405 | 20 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 1/4 | 6-32 x 1-1/4 socket cap 18-8 stainless full thread | 4 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 3/4 | 3/8-16 x 3/4 socket cap 310 stainless | 33 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 socket cap duplex 2205 | 5 |
|
| FasSpcMfg | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 5/8-11 x 1 1/8 | 5/8-11 x 1-1/8 special socket cap 17-4 ph condition h1100 dwg sk-188151 special head diam .863/.875 special head ht .580/.590 no markings on parts machined parts cut-threads drilled & broached | 8 |
|
| OneMonroe | MA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 | 1 split lockwasher stainless | 120 |
|
| OneMonroe | MA | Hex Head Cap Screw | Steel | Zinc/Clear | M6-1.0-1.00 x 25 | screw hex head cap m6-1 x25mm steel znc full thread din 933/bn56bn56 | 200 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 x 5/8 | #6 x 5/8 phillips pan t/s stainless pkg | 500 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #4-40 x 3/4 | 4-40 x 3/4 phillips flat m/s plated | 14428 |
|
| OneMonroe | MA | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #4-40 x 1/2 | #4-40 x 1/2 phillips pan head machine screw 316 stainless steel | 275 |
|
| Empire | WA | Hole Saws | 1 1/4 | 1-1/4 real mccoy hole saw | 3 |
| ||
| Empire | WA | Hole Saws | 1 1/4 | 1-1/4 fastcut hole saw | 4 |
| ||
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 9/16 | socket cap screws 304 ss #10-32 x 9/16 | 1099 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2 x 1/2 | phillips pan head sms 304 ss #2 x 1/2 | 361 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 3/4 | phillips pan head self driller ultra stainless #12 x 3/4 | 134 |
|
| Raw Produ | NJ | Machine Dies | Steel | 9/16-18 | hex dies hss 33e136f-9/16-18 unf | 500 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 7/8-9 x 2 1/2 | hex cap screws grade 2 zinc 7/8-9 x 2-1/2 | 64 |
|
| Raw Produ | NJ | Machine Dies | Steel | #8-32 | hex dies hss 33e008c-#8-32 unc | 9 |
| |
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 3/4 | phillips truss head ms 304 ss #8-32 x 3/4 | 8657 |
|
| AEROSPCE | MN | Round Female/Female Standoff | Steel | Plain / Furnace Black | 1 | sss-156-24zi pem .750 long snap-top standoff .156 top | 669 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | 632-1 | s-632-1zi pem self-clinching nut heat treated | 28432 |
| |
| AEROSPCE | MN | fh-0518-20zi pem 1.25long(flush-head)self-clinching | 104 |
| ||||
| F. Solutions | OH | Hex Head Cap Screw | Steel | Galvanized | 3/4-10 x 2 | hex head cap screw 3/4-10x2 a325 hot dipped galvanized | 10 |
|
| National | Ont | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | o-ring seal | 2 |
| ||
| National | Ont | Flat Washer | Steel | Plain / Furnace Black | #6 | #6 flat washer nyl | 1100 |
|
| National | Ont | Solid Rivet | Aluminum | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 12.0 x 6.0 x 13.85 | 12.0 odx6.0 idx13.85 shoulder rivet1010 st magni 568-25 microns | 2000 |
|
| National | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 8 | m5x.80x8 hx skt cs ft ss din 912 | 2000 |
|
| Mansco | MI | Button Head Socket Cap Screw | Steel | Zinc/Clear | 3/8-16 x 2 1/4 | 3/8-16x2-1/4 button hd soc cap scr triv f/t znc | 131 |
|
| Mansco | MI | 12 Point Flange Screw (CounterBore) | Steel | Plain / Furnace Black | 3/8-16 x 1.781 butt soc cap scr w/serr blk organic w/header point-per print | 1168 |
| |
| AFI | FL | Hex Head Cap Screw | Steel | Zinc/Yellow | 1/4-20 x 3/4 | 1/4-20x3/4 hex hd cs g8 st zd () () | 2350 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20x1-1/4 phil flat ms st zn () () | 594 |
|
| AFI | FL | Shoulder Washer (Screw Insulator) | Nylon (Polyamide) | Plain / Furnace Black | nylon shoulder washer () | 1000 |
| |
| AFI | FL | External Thread Insert, Self-Tapping Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | press in threaded insert stainless steel () | 1400 |
| |
| AFI | FL | Round Spacer | Nylon (Polyamide) | Plain / Furnace Black | 3/8 | 3/8 rd spacer nylon (RAF) () | 1000 |
|
| AFI | FL | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 tee nut 4 prong st zn 7/16 () () | 628 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #2-56 x 1/2 | 2-56x1/2 slotted pan ms st zn () () | 10000 |
|
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 2-56 x 5/16 phil flat ms sst | 798 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Zinc/Clear | m6-1.0 x 20 but soc alloy zinc | 163 |
| |
| Olander | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 x 3/4 dowel pin type-303sst | 25 |
| |
| Olander | CA | Machine Mounts, Casters, Leg Levelers | Steel | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 lvlr stl/stl pad () () | 34 |
| |
| Olander | CA | Cable Clamps & Ties | panduit adh backed flat cable mounts () () | 2984 |
| |||
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #0-80 x 5/16 | 0-80x5/16 phil flat 100 deg sst () | 77317 |
|
| Olander | CA | Machine Screw | Nylon (Polyamide) | Plain / Furnace Black | 2-56 x 1 slot pan hd nyl | () | 1843 |
| |
| Mansco | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Black | 10-24 x 5/8 flat phil ty-f metal tc scr triv blk znc | 3848 |
| |
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #8-15 x 1 1/2 | #8-15 x 1-1/2 self-piercing screws, 1/4 indented hex washer head slotted, twin lead, full thread, sharp point, steel zinc pltd, head painted royal brown | 7,170 |
|
| BFFast | MN | Rivet Installation Tools & Accessories | Aluminum | Plain / Furnace Black | huck 2480 tool hyd | 1 |
| |
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | M4-0.70 | M4x0.7 light hex full height flexslot steel zinc 23mfa-m407 | 80 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | 1-8 | 1-8 heavy hex full height flexslot steel plain | 840 |
|
| Parker | AZ | Socket Head Cap Screw | ASTM A574 | Plain / Furnace Black | 5/8-18 x 1 3/4 | 5/8-18 x 1-3/4 socket head cap screw fully threaded 4037 aly stl cad plated w/nylon patch per nas1351-10le28p made in u.s.a. | 101 |
|
| Arden | WI | Machine Screw | Steel | Zinc/Clear | #8-32 x 5/8 | 832x5/8 hex ms zc | inquire |
|
| BHAM | AL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 1 1/4 | 1/2-20x1-1/4 socket cs 300 ser ss b18.2.1 b18.3 | 34 |
|
| THRDFAST | FL | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 6 x .045 x 7/8 | ultra thin cutting disc-18-8 304 & acid-resisting | 7 |
| |
| THRDFAST | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M14-2.00 x 55 | a2 ss hex c/s | 48 |
|
| THRDFAST | FL | Socket Head Cap Screw | Steel | Plain / Furnace Black | #8-32 x 1 1/2 | socket c/s b18.2.1 b18.3 | 13 |
|
| THRDFAST | FL | Sockets | 1 | 1 drivex2-1/8 std socket-12 point | 1 |
| ||
| THRDFAST | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 5/8-11 x 4 3/4 | a193 b7 a/t stud b18.2.1 b18.31.2 | 5 |
|
| THRDFAST | OK | Socket Head Cap Screw | Steel | Plain / Furnace Black | 7/16 | nf-20x1 1/4 socket c/s b18.2.1 b18.3 | 75 |
|
| BRIGHBEST | IL | Wheel Nut | Steel | Zinc/Black | 1 1/8-16 | 1 1/8-16 rh lug nut zb | 44 |
|
| Eurolink | SC | Cap Nut (Acorn Nut) | Brass | Nickel Plated | M3 | m3 din 1587 brass nickel plated acorn nut high type | 100 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Plain / Furnace Black | 5/8-11 x 9 | astm a193 gr. b8 class 2 all thread stud ss | 722 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 4 3/4 | astm a193 b8m class 2 all thread stud teflon orange | 9 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 11 1/2 | 3/4-10x11-1/2 astm a320 l7 all thread stud tfe black | 565 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain / Furnace Black | 1 1/8-8 x 6 | astm a193 b7 heavy h/b | 458 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
