FCH Member Advertisement
FCH News
3 inch length Flat Washers (ASME B18. 22.1)
Flat Washers, or just Plain Washers, are a flat annulus or ring, often of metal, used to spread the load from the head of a screwed fastening to the base material. Flat washers are used to increase the bearing surface of a nut or fastener's head thus spreading the clamping force over a larger area.
21 results, (click on any line for more information)
| Buy Flat Washers from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Ababa | CA | Flat Washer | Steel | Galvanized | 3/4 x 3 x 1/4 | 3/4 x 3 f/w .250 thk stl hdg b18.22.1 | 34 |
|
| Exim | S'pore | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1.626 x 3 | washer flat s/s passivated1.626 x 3.302 x 0.254 mm0.064 x 0.130 x 0.010 in b18.22.1 | 1020 |
|
| SII | IN | Flat Washer | Steel | Phosphate | #8 x 3 | #8 x 3 quadrex round washer deep thread c1022 hardened black phosphated 2 000 per box b18.22.1 | 220713 |
|
| QFC | TX | Flat Washer | Steel | Plain | 1 x 3 | -diagram-mercury mk3 fw 1 b18.22.1 | 43 |
|
| QFC | TX | Flat Washer | Steel | Plain | 1 x 3 | scrape-burr kit 3+1 b18.22.1 | 1 |
|
| B & K FAST | PA | Flat Washer | Brass | Plain | 1 1/4 x 3 x 1.315 | 1 1/4 x 3 od brass flat washers 1.315 x 2.993 x .164 b18.22.1 | 5 |
|
| BHAM | AL | Flat Washer | Steel | Galvanized | 7/8 x 3 | 7/8x3 od hdg flat thru-hard b18.22.1 | 19 |
|
| QFC | TX | Flat Washer | Grade A36 | Galvanized | 9/16 x 3 | 9/16 id x 3 od x 3/16 thk f/w a36 hdg b18.22.1 | 34 |
|
| QFC | TX | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3 x 3 | ground plate 304ss 1/2 x 3 x 3 b18.22.1 | 13 |
|
| Ace Bolt | MS | Flat Washer | Brass | Plain | 1.703 x 3 | 1.703 x 3 wash .062 tk {flat w/.006} brass b18.22.1 | 169 |
|
| THRDFAST | FL | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | 1 x 3 | neoprene spec. dim. f/w 1/4 thk b18.22.1 | 95 |
|
| THRDFAST | FL | Flat Washer | Steel | Galvanized | 1 1/4 x 3 | spec. dim. f/w 1/4thk hdg b18.22.1 | 21 |
|
| THRDFAST | FL | Flat Washer | Steel | Plain | 1 1/2 x 3 | spec. dim f/w 1/2 thk b18.22.1 | 16 |
|
| THRDFAST | FL | Flat Washer | Steel | Galvanized | 3/4 x 3 | spec. dim. f/w 3/8thk hdg b18.22.1 | 14 |
|
| THRDFAST | TN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .9 x 3 | 18-8 ss special dim f/w 1/4thk b18.22.1 | 6 |
|
| THRDFAST | MS | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8 x 3 | 18-8 ss spec dim f/w 25thk b18.22.1 | 17 |
|
| KBS | TN | Flat Washer | Steel | Plain | .300 x 3 | .300hd x3 pin w/7/8 or 1 wshr pdpwl-300 #50116 b18.22.1 | 2,000 |
|
| THRDFAST | AL | Flat Washer | Steel | Galvanized | 1/2 x 3 | 1/2x3 round hdg 1.00# b18.22.1 | 10 |
|
| THRDFAST | AL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 3/8 x 3 | 18-8 ss spec. dim. f/w b18.22.1 | 454 |
|
| THRDFAST | MS | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 3 | ss spec dim f/w 3/16thk b18.22.1 | 32 |
|
| WSB | KY | Flat Washer | Steel | Plain | 31/32 x 3 x 3/4 | q/washer ret all (pl) 31/32x3x3/4 b18.22.1 | 50 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
