FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | IA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/2 x 1 1/2 | 1/2x1-1/2 uss gr8 hhcs y/z | 276 |
|
| RePneu To | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/4-14 x 2 1/2 | 1/4-14x2 1/2 indent hwh med duty #3 point teks self drilling screws (inch) bulk-climaseal | 1178 |
| |
| Jackson | MS | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Plain | t8 x 1 | t8x1 torx tamperproof bit with pin hole | 26 |
|
| Jackson | MS | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/8 x 2 1/2 | extended prong chisel pt. | 9484 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Plain | #6-40 x 1/4 | nf socket set cup point | 1135 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 x 6 | nc hex c/s 18-8 ss | 24 |
|
| RePneu To | MI | Finished Hex Nut | Class 8.8 | Zinc/Clear | M24-3.00 | m24-3.00 hex nuts class 8 zinc cr+3 din 934 | 70 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain | 1/2 x 1 3/4 | nc b-7 hex c/s | 198 |
|
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | auvecopak chrysler trim panel retainers | 2 |
| |
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 | nc socket hd c/s 18-8 s/s | 326 |
|
| Jackson | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 3/8 | truss phillips tapping type-ab | 6854 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Plain | 1/2 x 2 | nc socket set cup point | 225 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain | M8-1.25 x 35 | h/b a-4 stainless f/t | 90 |
|
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | auvecopak honda & acura retaining clips | 1 |
| |
| OneMonroe | NC | Plastic Push-In Rivets (Plasti-Rivet etc.) | auvecopak toyota push-type retainers | 2 |
| |||
| Jackson | MS | Hairpin Cotter Pin (Bridge Pin, R-Clip) | Steel | Zinc/Clear | #207 .093 x 2 5/16 | oal hair pin clip ( hitch) | 228 |
|
| Jackson | MS | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-14 x 3/4 | #12-14x3/4 #3 point. hex washer tek | 21774 |
|
| Jackson | MS | Socket Head Cap Screw | Class 12.9 | Plain | M20-2.50 x 65 | socket hd c/s | 23 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 1/2 | round slotted m/s 18-8 304 | 25 |
|
| OneMonroe | NC | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | auvecopak gm trim panel retainers | 2 |
| |
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/2 x 5 | nc hex c/s | 7 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | Grade 8 | Plain | 3/8-16 x 2 1/4 | nc f/t t/b gr. 8 finish | 11 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain | M16-2.00 x 200 | hex c/s partially threaded | 22 |
|
| Jackson | MS | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 1 | nc flat socket c/s 18-8 304 | 67 |
|
| Jackson | MS | Hex Jam Nut | Steel | Plain | 7/8-14 | nf jam slotted nut | 40 |
|
| Jackson | MS | U-Bolt | Steel | Zinc/Clear | 1/2 x 4 9/16 x 6 3/4 4 | 1/2x4 9/16x6 3/4 u-bolt 4 pipe #lt10 | 5 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | 6-32 x 3/4 slotted ovalal hd-ms steel zinc plt | 17500 |
|
| Century | FL | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | .203 x .555 x .031 | black neoprene washer .203x.555x.031 | 17500 |
|
| Century | FL | Socket Head Cap Screw | Class 12.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M10 x 40 | m10 x 40 socket c/s grd 12.9 dacromet-treated hydro-embrit din 912 | 24 |
|
| TownCountry | AR | Router Bits | 3/4 | router bit c.t. 2 flute straight 2 c.e. 3 oal 1/2 shank | 3 |
| ||
| Century | FL | Flat Washer | Plain | #6 x .312 x .035 | ms15795-805 | 67398 |
| |
| TownCountry | AR | Router Bits | 1 1/2 | router bit carbide tip 2 flute 1 1/4 c.e. 1/2 shank 3 oal | 1 |
| ||
| Century | FL | Split Lock Washer | Steel | Plain | #10 | ms35338-43p lock washer | 19466 |
|
| Century | FL | Machine Screw Nut | Steel | Plain | ms172241 nut spanner bearing reta | 24 |
| |
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 128 | ms24693c128 nasm24693c128 | 24 |
|
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5 x 6 | m2.5 x 6 slottedpan hd m/s 18-8 s/s iso 1580 | 17450 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #2-56 x 3/16 | rev 17 2-56 x 3/16 soc cap ss pass qq-p-35 ty 6 unknurled portion of head must be in tolerance of asme b18.3 spec l3 technologies l3 technologies | 17421 |
|
| Century | FL | Hex Jam Nut | Plain | 5/16-24 | ms35691-15 | 200 |
| |
| TownCountry | AR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 5/8 | flat phillips 18-8 304 304sst | 92 |
|
| Century | FL | Hex Jam Nut | Plain | 7/16-20 | ms35691-31 | 24 |
| |
| Century | FL | Flat Washer | Steel | Plain | ms51496e219 flat washer | 24 |
| |
| Century | FL | Flat Washer | Nylon (Polyamide) | Plain | M10 | 006-8624300 m10 black nylon flat washer 10.5 mm id x 22mm od x 2.36-2.63 thk black nylon 66wf-0866-0413-0098-bk17w0866b ncr 006-8624300 | 15330 |
|
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 4.0 | m 4.0 steel zinc plt external tooth lock washers din 6797a | 17275 |
|
| Century | FL | pem sos-632-18 sos-632-18 | 17272 |
| ||||
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 5/32 (.251-.312) | cherry cr3242-5-06 vechecr3242-5-06 | 17200 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Black Oxide | 5/8-11 x 3 3/4 | 5/8-11 x 3-3/4 o/a a193 b7 all thread stud w/2 a194 2h hvy hex nuts black oxide | 1 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Cadmium | 1-8 x 7 | 1-8 x 7 o/a a193 b7 all thread stud cad domestic | 2 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/8-7 x 5 | 1-1/8-7x5 18-8 ss fin hex bolt domestic | 9 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4-8 x 5 | 1-1/4-8x5 a193 b7 hvy hex tap bolt ptfe blue domestic | 91 |
|
| SunPack | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 1 | m5-0.80 x 1m a2 ss all thread rod | 26 |
|
| SunPack | FL | Heavy Hex Tap Bolt (B7, B8, A307B etc.) | Galvanized | 1/2-13 x 3 1/2 | 1/2-13 x 3-1/2 a325 hvy hex structural tap bolt hdg | 24 |
| |
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 3 1/2 | 3/4-10 x 3-1/2 o/a a193 b7 all thread stud w/2 a194 2h hvy hex nuts plain | 5 |
|
| SunPack | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | 1-8 x 5 | 1-8 x 5 a193 b8 ss hvy hex bolt | 2 |
|
| SunPack | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/8-11 x 2 3/4 | 5/8-11 x 2-3/4 316 ss fin hex bolt domestic | 7 |
|
| SunPack | FL | Hex Head Cap Screw | Grade A | Zinc/Clear | 3/4-10 x 2 3/4 | 3/4-10 x 2-3/4 a307a fin hex bolt zinc full thread | 26 |
|
| SunPack | FL | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 316 ss fin hex tap bolt full thread | 41 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 1-8 x 16 | 1-8 x 16 o/a carbon steel all thread stud zinc | 21 |
|
| Endries | WI | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 3/16 x 1 | 3/16x1 slotted spring pin mechanical zinc | 9500 |
|
| Endries | WI | Button Head Socket Cap Screw | Steel | Zinc/Black | 3/8-16 x 2 1/4 | 3/8-16x2-1/4 button socket head cap screw black zinc patch | 2850 |
|
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Plain | 7 | 4l1ff 1/4 id type 7 nyliner .140 bearing | 1000 |
| |
| Endries | WI | Scissors, Snips, and Shears | 8 | 28n 8in scissors (wiss) | 23 |
| ||
| Endries | WI | Sockets | 5/8 | j7720h 5/8 impact socket 3/8 dr 6pt deep (stanley pro | 7 |
| ||
| Endries | WI | Self-Clinching Nut | Steel | Zinc/Clear | 1/4-20 x .087 | 1/4-20 x .087 min self clinch nut stl znc | 3772 |
|
| Endries | WI | Blind Rivet | Steel | Plain | 3/16 (1/2) | 3/16 x 1/2grip lrg flange blind rivet stl/stl hv2px | 10200 |
|
| Endries | WI | Hammers & Mallets | 1603 .401 shank x1-3/4 overall length smoothing hammer | 4 |
| |||
| Endries | WI | Machine Screw | Steel | Plain | #6 | 6in scrubbrush finger grade ip white synthetic fillister | 150 |
|
| Endries | WI | Pipe Elbow | Brass | 169 | 169pmt-6-4 3/8x1/4 brass male 90 degree swivel elbow | 60 |
| |
| Endries | WI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Yellow | M12 | m12 class 8 hex top locknut yellow zinc din 980v | 1 |
|
| Endries | WI | Flared Fittings | Brass | 3/8 | 3/8fl-nuthvy (oe) 3/8 brass flare nut 5/8-18 thread | 350 |
| |
| Endries | WI | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/4 x 4 | 1/4x4 extended prong cotter pin trivalent clear zinc | 150 |
|
| Endries | WI | Protective Caps & Plugs | Steel | T2 | t2gs toes2go steel thread one end cap white small (impacto) | 3 |
| |
| Endries | WI | Screwdriving Insert Bits & Power Bits | Steel | 3 x 6 | 1150p3a-2 3x6in phillips power bit 1/4 hex bullnose | 46 |
| |
| Endries | WI | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/4-10 x 9 1/4 | 3/4-10x9-1/4 grade 2 hex head cap screw trivalent clear zinc | 10 |
|
| Endries | WI | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | Nylon (Polyamide) | Plain | 20187 black nylon push type retainer | 45 |
| |
| Endries | WI | Knobs & Star Grips | 33851 3/8-16 | 33851 3/8-16 blind hole lobed knob black | 35 |
| ||
| Endries | WI | Drywall Screw | Steel | Phosphate | #8 x 2 | #8 x 2 ph bugle drywall screw stl phos/oil | 772 |
|
| Endries | WI | Wood Screw | Steel | Zinc/Clear | #8 x 2 1/2 | 8x2-1/2 phillips flat head wood screw zinc | 3600 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 6 | m 4 x 6 iso 7380-2 10.9 zn button hd socket w/flange | 54,000 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 8 | m 4 x 8 iso 7380-2 10.9 zn button hd socket w/flange | 74,750 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 12 | m 4 x 12 iso 7380-2 10.9 zn button hd socket w/flange | 44,300 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 16 | m 4 x 16 iso 7380-2 10.9 zn button hd socket w/flange | 88,440 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 20 | m 4 x 20 iso 7380-2 10.9 zn button hd socket w/flange | 42,660 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M4 x 25 | m 4 x 25 iso 7380-2 10.9 zn button hd socket w/flange | 43,300 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 8 | m 5 x 8 iso 7380-2 10.9 zn button hd socket w/flange | 31,030 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 10 | m 5 x 10 iso 7380-2 10.9 zn button hd socket w/flange | 96,795 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 12 | m 5 x 12 iso 7380-2 10.9 zn button hd socket w/flange | 49,883 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6 x 10 | m 6 x 10 iso 7380-2 10.9 zn button hd socket w/flange | 25,352 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6 x 12 | m 6 x 12 iso 7380-2 10.9 zn button hd socket w/flange | 79,125 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 16 | m 5 x 16 iso 7380-2 10.9 zn button hd socket w/flange | 72,574 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 20 | m 5 x 20 iso 7380-2 10.9 zn button hd socket w/flange | 30,160 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M5 x 25 | m 5 x 25 iso 7380-2 10.9 zn button hd socket w/flange | 33,750 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6 x 16 | m 6 x 16 iso 7380-2 10.9 zn button hd socket w/flange | 64,820 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6 x 20 | m 6 x 20 iso 7380-2 10.9 zn button hd socket w/flange | 44,600 |
|
| MetricThrd | CA | Button Head Socket Cap Screw | Class 10.9 | Zinc/Clear | M6 x 25 | m 6 x 25 iso 7380-2 10.9 zn button hd socket w/flange | 68,250 |
|
| SunPack | FL | Gaskets | 1/16 | 4 150# 1/16 garlock ifg-5500 ring gasket | 6 |
| ||
| SunPack | FL | Gaskets | 1/8 | 8 150# 1/8 durlon 9000 blue full face gasket | 1 |
| ||
| Endries | WI | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3 | 1/2x3 18-8 stainless steel hex head lag screw | 200 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | phil flat 100 deg m/s 18-8 ss | 9376 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | phil flat m/s 18-8 ss | 2078 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 7/16 | phil flat m/s 18-8 ss | 362 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | slotted pan m/s 18-8 ss | 1720 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | phil flat 100 deg m/s 18-8 ss | 302 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | phil flat 100 deg m/s 18-8 ss | 400 |
|
| MAINSOURC | NH | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 | #10x1 tri-groove tamperproof type-a 18-8 ss | 1355 |
|
| MAINSOURC | NH | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/2 | slotted pan t/s type-a 18-8 ss | 459 |
|
| MAINSOURC | NH | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/4 | phil pan t/s type-a 18-8 ss | 329 |
|
| MAINSOURC | NH | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 | phil truss t/s type-a 18-8 ss | 109 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 1/2 | slotted pan m/s 18-8 ss | 183 |
|
| MAINSOURC | NH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | #12-24 | ny insert l/n (ne/nm) stl z/clr | 561 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 5/8 | slotted fill m/s 18-8 ss | 122 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 1/2 | slotted fill m/s 18-8 ss | 628 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 1/8 | phil flat m/s 18-8 ss | 80 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 1/2 | phil flat m/s 18-8 ss | 824 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 5/8 | slotted flat m/s 18-8 ss | 400 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 3/8 | phil pan m/s 18-8 ss | 386 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 3/16 | phil pan m/s 18-8 ss blk | 2832 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/4 | phil flat m/s 18-8 ss | 750 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
