FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 ss binding head | 434 |
|
| Century | FL | Finished Hex Nut | Cadmium/Yellow | 1/4-20 | ms51967-3 | 134 |
| |
| Century | FL | Button Head Socket Cap Screw | Class 4.8 | Black Oxide | 1-72 x 3/16 | mhw001-012ab rev8 1-72 x 3/16 but soc ss pass qq-p-35 tyii bl ox m13924 cl4 l3 technologies mhw001-012ab | 2623 |
|
| Century | FL | Service & Repair Kits | parker hannifin 2t133-1 installation kit cartridge pump | 163 |
| |||
| NutsBolts | NE | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 ss phillips w/patch |
| |
| NutsBolts | NE | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3.5 | 3.5m-.6 x 6 ss phillips pan m/s |
| |
| NutsBolts | NE | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | rubber grommet 1/2 x 1 1/2 od 1/4w groove 1 1/4 id |
| ||
| NutsBolts | NE | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 ss set screw |
| |
| NutsBolts | NE | Hex Jam Nut | Steel | Zinc/Clear | M12 | 12m-1.25 hex jam nut zp |
| |
| NutsBolts | NE | Finished Hex Nut | Steel | Zinc/Yellow | 5/8-11 | 5/8-11 hex nut zyl9 |
| |
| NutsBolts | NE | Step Drill Bits (Unibit etc.) | Steel | 9/16-1 | 9/16-1 step drill bit |
| ||
| NutsBolts | NE | Tie Rod (Brace Rod, Double End Rod) | Plain / Furnace Black | 189m2 sag rod |
| |||
| NutsBolts | NE | Hex Machine Bolt | Nylon (Polyamide) | Plain / Furnace Black | 5/8-11 x 3 | 5/8-11 x 3 nylon hex bolt |
| |
| Centennia | CO | Heavy Hex Nut | ASTM A563 Grade DH | Plain / Furnace Black | 1-8 | 1-8 a563 gr dh hvy nut | 4 |
|
| Centennia | CO | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 3/4-10 x 4 | 3/4-10 x 4 tap bolt gr5 zinc | 146 |
|
| Kanebridge | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10-32 x 3/8 | #10-32x3/8 square pan full thread type-f zinc and bake thread cutting screws | 100000 |
|
| NAPPCO | TX | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-20 x 1 1/4 | philpanthdrolscr 48-2 18-8 #4-20x1-1/4 | 7000 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | M8-1.25 x 25 | m8 x 1.25 x 25 hex flange bolt a2-70 stainless steel iso 4162 | 1700 |
|
| CIF | IL | Collar Stud | Class 10.9 | Phosphate | M72 | m6 x 1.0 x 47.5/46.5 collar stud 10.9 phos coated for 72 hours to red rust | 86 |
|
| CIF | IL | Hex Head Cap Screw | Class 10.9 | Phosphate | M20-2.50 x 70 | m20 x 2.5 x 70 hex cap screw 4014 10.9 phos coated for 72 hours to red rust din 931/isoiso | 1670 |
|
| Optimas | IL | Flange Nut, Non-locking | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2-0.40 | m2x0.4 hex flange nut a2 stainless steel 4mm af x 5mm oah x 6.5mm flange diameter | 1194.63037109375 |
|
| Brikksen | FL | Fender Washer | Plain / Furnace Black | 1/2 x 2 | 1/2 x 2 fender washer asme b18.21.1 | 28500 |
| |
| Brikksen | FL | Lag Screw | Plain / Furnace Black | 5/16 x 2 1/2 | 5/16 x 2-1/2 hex lag screw asme b18.2.1 | 1300 |
| |
| SWACO | OH | Machine Screw | Steel | Zinc/Clear | #4-40 x 5/8 | #4-40x5/8 slotted pan ms stl zp | 200 |
|
| Irwin Ind | Ont | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 x 25 | M8x25 button soc cap a2 18-8 304 steel | 100 |
|
| SWACO | OH | Dowel Pin | Passivated | ms16555-617 | 100 |
| ||
| SWACO | OH | External Thread Insert, Self-Tapping Insert | Steel | Zinc/Yellow | 4.2-6.6 (4.2-6.6) | m6-1.0grip 4.2-6.6 large flange insert steel zinc yellow | 1900 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 1191-8cn500 heli-coil insert | 985 |
| ||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 1185-05cn125 heli-coil insert | 3175 |
| ||
| SWACO | OH | Machine Screw | Plain / Furnace Black | screw machine pan head cross recess | 50240 |
| ||
| SWACO | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 3/4 | 1/4-20x1-3/4 hhcs 18-8ss ft | 295 |
|
| Accutite | CA | Machine Screw | Steel | Zinc/Clear | #2-56 x 3/16 | 2-56 x 3/16 slottedfillister ms steel zinc rohs compliant no slottedburrs | 6500 |
|
| Accutite | CA | Finished Hex Nut | Brass | Plain / Furnace Black | 1 1/8-12 | 1 1/8-12 unf2b brass nipple nut per print rev l | 130 |
|
| UNEEDA | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #10 x 2 | #10x2 unslotted hex w/h tek 410 | 300 |
|
| UNEEDA | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain / Furnace Black | #6 x 1 | #6x1 phil flat tek steel | 27800 |
|
| AIH | AZ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2 x 14 | M2x14 dowel pin s/s | 317 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 3/8-16 x 5 1/2 | 3/8-16 x 5-1/2 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/16 x 1 1/4 | 7/16x1-1/4 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| Field Fas | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 2 | 10-24 x 2 phillips pan m/s 18-8 ss | 1000 |
|
| Field Fas | IL | Set Screw (Socket Head) | ASTM A574 | Plain / Furnace Black | 5/16-18 x 2 | 5/16-18 x 2 socket flat point set screw alloy stl thermal black ox w/full length nylon strip on one side manufactured to asme b18.3 and astm f912_x000d_ | 555 |
|
| OneMonroe | MN | Straight Anchor Bolt | Steel | Plain / Furnace Black | 1-8 x 6 | 1-8 x 6 anchor bolt (no nut) | 6 |
|
| OneMonroe | MN | Sprockets | Plain / Furnace Black | 1/2 | 35b sprocket 1/2 finished bore 11 hardened teeth | 8 |
| |
| OneMonroe | MN | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 3/4 | 1/2-13 x 3/4 but soc c/s efi 18-8ss | 25 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/8-14 x 4 | 7/8-14 x 4 yellow zinc finish sae j429 grade 8 hex cap screw | 1 |
|
| OneMonroe | MN | Hole Saws | Steel | 3/8 x 12 | hole saw accessories (for use with blu-mol and blu-mol xtreme hole saws) 3/8inch x 12inch extension | 1 |
| |
| OneMonroe | MN | carr-lane cl-6-blpt-1.50 | 3 |
| ||||
| OneMonroe | MN | Electrical Lugs & Terminals | Tin Plated | 1 3/4 | copper compression lug conductor size 350 kcmil 1 hole 1/2in bolt size 1-3/4in hole spacing. long barrel. no sight window tin plated. ul. csa. color red brand oec | 200 |
| |
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 3/8-16 x 4 1/4 | 3/8-16 x 4 1/4 ft studs zp | 215 |
|
| OneMonroe | MN | Staples | Galvanized | 1 1/2 | 4812pg 1/4 crown 1-1/2 l 18ga galv soffit staple 5000/bx | 59 |
| |
| OneMonroe | MN | Machine Screw | Nylon (Polyamide) | Plain / Furnace Black | #10-24 x 3/4 | 10-24 x 3/4 slottedbinder m/s nylon | 650 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 4 1/2 x 6 1/4 | rig swivel plate less axle w/swivel lock accepts wheel sz 5 x 2 rig mat steel finish zinc top plate sz 4-1/2 x 6-1/4 bolt hole ptrn 2-7/16 x 4-15/16 slotted to 3-3/8 x 5-1/4 | 2 |
|
| OneMonroe | MN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 5 | 5 hook&loop stearated disc a80b aluminum oxide gold paper 50 discs/box | 1 |
| |
| OneMonroe | MN | Gloves & Hand Protection | vinyl coated seams out glove right hand only | 24 |
| |||
| OneMonroe | MN | Epoxy Adhesives | fast hardener-250ml | 30 |
| |||
| OneMonroe | MN | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | yokerigid5x15/16in zinc(41008) |
| ||
| OneMonroe | MN | Heat Shrink Tubing | tube shrink p/n marker 430004995 | 500 |
| |||
| Alma Bolt | MI | Machine Screw | Plain / Furnace Black | 5/16-18 x 1/2 | 5/16-18 x 1/2 round slotted machine screw | 2646 |
| |
| Alma Bolt | MI | Socket Head Cap Screw | null | Plain / Furnace Black | 7/16-20 x 1 | 7/16-20 x 1 sae alloy socket hd cap screw | 208 |
|
| Alma Bolt | MI | Flat Head Socket Cap Screw | ASTM A574 | Plain / Furnace Black | 3/8-24 x 1 1/4 | 3/8-24 x 1 1/4 sae flat hd socket cap screw alloy | 1569 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 65 | carriage bolt full thread a2 m8-1.25 x 65 din 603 | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 3/8 | 8-32 x 3/8 phillips pan type-f 18-8 ss | 4000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 1/2 | 10-24 x 1-1/2 ph pan m/s ss/bo | inquire |
|
| Brikksen | FL | Internal Type HO Retaining Ring | Steel | Phosphate | 1.464 x 1.526 x .050 | 1.464x1.526x.050 int ret ring steel/black phosphorus | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #18 x 3 | 18 x 3 phillips flat t-a ss bright chrome/plastisol- | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 x 1/2 | 6 x 1/2 phillips ovalal type-a ss 100 per box f-72box | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 10 | slotted pan head machine screw-100 per bag a2 m3-.50 x 10 din 85 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M3-0.50 x 30 | slotted pan head machine screw a4 m3-.50 x 30 din 85 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12-24 x 1 1/2 | 12-24 x 1-1/2 phillips pan head m/s 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | 1000 |
|
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/16-20 | 7/16-20 hex jam nut ss | 10000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 4 x 1/4 | 4 x 1/4 ph pan t-a stl/zinc ab is ok | inquire |
|
| Brikksen | FL | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 25 | hex flange bolt non-serrated a2 m8-1.25 x 25 din 6921 | 33000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 8 | flat socket head cap screw full thread a2 m4-.70 x 8 din 7991 | 147000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1/2 | 10-32 x 1/2 flat socket cap screw 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 1/4-20 x 5/8 | 1/4-20 x 5/8 hex wash f 410 | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5 | flat washer-100 per bag a2 m2.5 din 125a | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 3/4 | 10-24 x 1-3/4 phillips ovalal m/s ss heavy wax- | inquire |
|
| Brikksen | FL | Service & Repair Kits (Bolt Packs) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 4 1/2 | 3/8-16 x 4-1/2 carriage bolt 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Jam Nut | Brass | Plain / Furnace Black | 7/16-14 | 7/16-14 hex jam nut brass | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Yellow | #6 x 1 | 6 x 1 phillips flat type-a ss/zinc yellow/antique white | inquire |
|
| EASTERN SCREW | RI | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1 | 5/16-18 x 1 hex washer 18-8 | 8800 |
|
| Bossard | AZ | fhs-250-10 w/taper penn engineering | 2186 |
| ||||
| Optimas | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 x 16 x 3.4 | 8mm x 16mm x 3.4mm flat washer a2 ss tmpi quick clean | 30 |
|
| HYBROCO | MI | Flat Head Socket Cap Screw | Steel | Black Oxide | 3/8-16 x 5/8 | 3/8-16 x 5/8 fhscs blk ox | 750 |
|
| HYBROCO | MI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 5 1/2 | 3/8-16 x 5-1/2 hhcs gr5 zn | 25 |
|
| Delta | TX | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 3/32 x 1/4 | roll pin 420 sst | 10334 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Galvanized | hex machine bolt class 8.8 galvanized | 133 |
| |
| Coburn Myers Fastening Systems | PA | Flat Washer | Steel | Zinc/Yellow | flat washer carbon steel zinc/yellow | 48 |
| |
| Coburn Myers Fastening Systems | PA | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | hex tap bolt (fully threaded) grade 5 zinc/clear | 25 |
| |
| AIH | AZ | O-Rings & Quad Ring Seals (X-Rings) | o-ring | 2 |
| |||
| AIH | AZ | Socket Head Cap Screw | Steel | Black Oxide | shcs alloy steel blk ox. | 144 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 | 10-24 x 1 phillips ovalal m/s ss/bo | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 8 | socket head cap screw full thread a2 m4-.70 x 8 din 912 | 1000 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M24-3.00 x 130 | hex head cap screw partial thread a4 m24-3.0 x 130 din 931 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 6 1/2 | 1/4-20 x 6-1/2 hex cap 18-8 f593c | 100 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 70 | socket head cap screw partial thread a2 m5-.80 x 70 din 912 | inquire |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | #32 | #32 cushion clamp alunimum | inquire |
| ||
| Brikksen | FL | Metal Drill Bits | Steel | 1/4 | 1/4 black & gold hss jobber drill bit 206us1664 | 60 |
| |
| Hewes | NY | Socket Head Cap Screw | Steel | Zinc/Black | 3/8-16 x 1 1/4 | 3/8-16x1-1/4 socket hd cap screw zinc black chromate | 361 |
|
| Hewes | NY | Button Head Socket Cap Screw | Steel | Plain / Furnace Black | 5/16-24 x 3/4 | 5/16-24x 3/4 but hd soc | 64730 |
|
| OneMonroe | MA | Machine Screw | Brass | Plain / Furnace Black | #4-40 x 1/2 | 4-40 x 1/2 slottedround m/s brass | 400 |
|
| OneMonroe | MA | Flat Washer | Steel | Black Oxide | M12 | m13id x m3 x m22 od (m12) nominal size black oxide flat washer | 200 |
|
| OneMonroe | MA | Swage Sleeves, Crimp Sleeves | Aluminum | Plain / Furnace Black | 5/16 | 5/16 aluminum hour glass sleeves | 100 |
|
| OneMonroe | MA | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/8-24 x 2 1/4 | 3/8-24 x 2 1/4 socket cap screw | 159 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 1 3/4 | 3/8-16 x 1 3/4 hex cap screw grade 2 plated | 2907 |
|
| OneMonroe | MA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 1/4-14 x 3/4 | 1/4-14 x 3/4 unslotted serrated hex washer head 7/16 drive self drilling screw #1 point zinc | 1300 |
|
| Empire | WA | Metal Drill Bits | # x 5 25/64 | #xl5-25/64 brute splt pt drill | 12 |
| ||
| Empire | WA | Hex Tap Bolt (Fully Threaded) | Grade A | Plain / Furnace Black | 3/8 x 1 3/4 | 3/8 x 1-3/4 a307 hex tap bolt | 92 |
|
| Empire | WA | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/8 | 6-32 x 1-1/8 pan phil m/s zp | 5000 |
|
| Empire | WA | Machine Screw | Steel | Plain / Furnace Black | #4-40 x 3/8 | 4-40 x 3/8 pan phil m/s | 4215 |
|
| Empire | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain / Furnace Black | #6 x 1 | #6 x 1 pan phil t/s | 583 |
|
| Irwin Ind | Ont | Socket Head Cap Screw | Steel | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20x1 unc f/hd soc. capscrew b18.2.1 b18.3 | 2000 |
|
| Longhorn | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain / Furnace Black | 3/4-10 x 2 | 3/4-10 x 2 a325 structural bolt plain | 588 |
| |
| Raw Produ | NJ | Machine Screw | Brass | Plain / Furnace Black | #10-24 x 3 1/2 | brass slotted flat head ms #10-24 x 3-1/2 | 25 |
|
| Raw Produ | NJ | Hex Jam Nut | Steel | Zinc/Clear | 1 1/2-6 | hex jam nuts zinc 1-1/2-6 | 74 |
|
| Raw Produ | NJ | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/4 | carriage bolts 304 ss 1/4-20 x 1-1/4 | 427 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain / Furnace Black | #6-32 x 2 | brass slotted round head ms #6-32 x 2 | 358 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 1 3/4 | square drive pan head sms 304 ss #14 x 1-3/4 | 1913 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 20 | metric flat head socket cap screws a2 ss m4 x 20m | 1322 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1 | button head socket cap screws 304 ss #10-32 x 1 | 3320 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain / Furnace Black | #4-40 x 3/16 | socket set screw 316 ss #4-40 x 3/16 | 942 |
|
| Fastenerc | OH | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 stain 18-8 carriage bolt plain | 26980 |
|
| Fastenerc | OH | c1128-017-3b steel tinnerman sheet sprn zinc | 4360 |
| ||||
| AEROSPCE | MN | Latches & Catches | r4-05-21-405-10 southco push to close latch rotary bumper | 274 |
| |||
| AEROSPCE | MN | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | d9-47-3304-k dzus tech stud assy | 40 |
| |
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | wn-032-0cu pem self-locating projection weld nut | 2272 |
| ||
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 1/4-20 | 1/4-20 1dia free-run nitronic 60 heli-coil | 100 |
|
| F. Solutions | OH | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain / Furnace Black | 7/8-9 x 3 1/2 | heavy hex structural bolt 7/8-9x3 1/2 a325 domestic plain | 7 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1/2 | phil/slotted pan head combo machine screw 8-32x1/2 304 18-8 304 | 400 |
|
| F. Solutions | OH | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 3/4-10 x 1 1/4 | hex head cap screw 3/4-10 x 1-1/4 316 ss | | 30 |
|
| National | Ont | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #4 | #4 int tooth lockwasher sz | 33250 |
|
| National | Ont | Self-Sealing Screw | Brass | ASTM F1941-10 Fe/Zn-Ni | M4.2-1.41 x 20 | m4.2x1.41x20 screw lrg round t15 br pt steel znni black cr3+ w/sealer | 1158400 |
|
| National | Ont | Resistance/Projection Weld Stud | Steel | Zinc/Clear | 5/16 x 5/8 | mn weld screw 5/16 x 5/8 zinc | 9912 |
|
| Mansco | MI | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Painted | 8 x 1-3/4 flat sq/phil part brd type-17 w/yellow painted hds | 115000 |
| |
| Mansco | MI | Socket Head Cap Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 soc cap scr triv znc | 464 |
|
| AFI | FL | Self-Clinching Stud | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | flush head stud 410 stainless steel () | 1000 |
| |
| AFI | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M4 x 10 | m4x10 torx flat cs ss black ox iso 14581 () | 1500 |
|
| AFI | FL | Button Head Socket Cap Screw | Class 12.9 | Plain / Furnace Black | M4-0.70 x 8 | m4x0.7x8 button hd cs 12.9 st iso 7380 () | 2000 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Black | #10-32 x 1/2 | 10-32x1/2 torx pan st blk zn () () | 1027 |
|
| AFI | FL | Sockets | Zinc/Black | 10-32 x 1/2 | 10-32x1/2 sochdcs stblkzn w/patch () | 7500 |
| |
| Olander | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-24 x 7/8 but soc sst rohs | 51 |
| |
| Olander | CA | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/32 x 1/4 100 deg countersink rivet sst | 216 |
| |
| Olander | CA | Round Spacer | Nylon (Polyamide) | Zinc/Clear | #8 x 3/16 x 1/2 rd spacer nyl rohs | 73 |
| |
| Olander | CA | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | m3-.5 x 16 slot flat 316 sst | 117 |
| |
| Olander | CA | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 2-56 x 3/8 x 3/16 hex fem standoff sst rohs | 353 |
| |
| Olander | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | 6-32 self-locking nut plate steel | 67 |
| |
| Olander | CA | Set Screw (Socket Head) | Steel | Plain / Furnace Black | 10-24 x 5/8 soc set cup pt alloy | 18417 |
| |
| Olander | CA | Cable Clamps & Ties | Nylon (Polyamide) | Plain / Furnace Black | cable clamp nyl molded () () | 594 |
| |
| Olander | CA | Round Spacer | Aluminum | Zinc/Clear | 1/4 x 7/16 x 5/8 | 1/4x7/16x5/8 rd spacer alum non-rohs () | 122 |
|
| Mansco | MI | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1 soc cap scr 18-8 s.s. | 7130 |
| |
| F. Solutions | OH | Button Head Socket Cap Screw | Steel | Plain / Furnace Black | #8-32 x 1 1/4 | button socket head cap screw 8-32x1-1/4 alloy | 50 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | #6-40 | 6-40 light hex thin height flexslot steel cad 21fk-640 | 800 |
|
| F. Solutions | OH | Pipe Cap | Iron | Black Oxide | pipe cap 2-1/2 npt black malleable | 8 |
| |
| Parker | AZ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #1-64 x 1/8 | 1-64x1/8 pan head cap screw fully threaded 302 s/s plain w/cross recess made in u.s.a. | 660 |
|
| Pac Bolt | BC | Hex Machine Bolt | Grade A | Galvanized | 3/4 x 18 | 3/4 x 18 a307 hex hd bolt 6 nc galv b18.2.1 | 200 |
|
| Arden | WI | Machine Screw | Steel | Zinc/Clear | #8-32 x 3 1/4 | 832x3 1/4 slotted round ms zc | inquire |
|
| Arden | WI | Split Lock Washer | Steel | Zinc/Yellow | 7/16 | 7/16 split lock washer med zy | inquire |
|
| Arden | WI | Machine Screw | Steel | Plain / Furnace Black | #14 x 2 | 14x2 slotted hwh tyb 10 | inquire |
|
| Arden | WI | c-203 waldom | inquire |
| ||||
| THRDFAST | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M30-3.50 x 120 | hex c/s | 33 |
|
| THRDFAST | AL | Knives, Razors, Multifunction Tools | hinge-loc folding utility knife w/storage | 2 |
| |||
| THRDFAST | AL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #6-32 x 1 | t-316 ss slotted flat m/s b18.6.3 | 50 |
|
| Lightning | LA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 3/8 | fillister slotted m/s 18-8-ss | 900 |
|
| Lightning | LA | Hex Machine Bolt | Grade 2 | Plain / Furnace Black | 1 1/8-7 x 4 1/2 | 1-1/8-7x4-1/2 h/b gr.2 | 29 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M12-1.75 x 140 | socket c/s | 30 |
|
| Lightning | LA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-15 x 1 1/2 | oval phillip tapping 18-8 ss type-a sheet metal point 18-8 ss | 200 |
|
| Lightning | LA | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4-10 x 6 1/4 | wedge anchor 304-ss | 200 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
