FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Double End Stud | Steel | Zinc/Yellow | 1/4-20 x 17 | 1/4-20 x 17 1/4 double end stud q2b stressproof zinc yel (see print) rev n | 170 |
|
| Century | FL | parker/nichols d1-41-7 rev.p spring compession | 107 |
| ||||
| NutsBolts | NE | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 x 3 1/2 | 3/8 x 3 1/2 ss spring pin |
| |
| NutsBolts | NE | Carriage Bolt | Grade 5 | Black Oxide | 1/2-13 x 1 | 1/2-13 x 1 carriage bolt gr5 black oxide | 560 |
|
| NutsBolts | NE | Strut Systems (Channels, Clamps, Hangers, etc.) | 1/2-13 | 1/2-13 cone strut nut |
| |||
| NutsBolts | NE | Tie Rod (Brace Rod, Double End Rod) | Plain / Furnace Black | 183m2 sag rod |
| |||
| NutsBolts | NE | Nails | .113 x 2 3/8 | .113 x 2 3/8 30 taped brite ring shank nail |
| |||
| NutsBolts | NE | Heavy Hex Jam Nut | Grade 2H | Plain / Furnace Black | 1 1/4-8 | 1 1/4-8 a194-2h hvy hex jam nut |
| |
| Komar | MO | Hex Jam Nut | Steel | Zinc/Clear | 3/4-10 | 3/4-10 hex fin jam nut(11/16x1/4) zinc trivalent |
| |
| Centennia | CO | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3 soc flat c/s 18.8ss | 50 |
|
| Centennia | CO | Hex Machine Bolt | Grade A | Zinc/Clear | 1/4-20 x 4 | 1/4-20 x 4 nc a307a hex mach bolt zinc | 266 |
|
| CIF | IL | Fender Washer | Galvanized | 1/4 x 1 1/4 | 1/4 x 1 1/4 fender washer hot dip galvanize | 709 |
| |
| Optimas | IL | Weld Nut | Steel | Zinc/Clear | M12-1.75 | m12x1.75 short pilot 6proj hex weld nut steel 21mm af x 9.7mm thk per dwg rohs (p) | 681.41495132446289 |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12-1.75 | m12-1.75 hex nut a2 stainless din 934 | 28700 |
|
| Brikksen | FL | Machine Screw | Plain / Furnace Black | #14 x 1 1/2 | #14 x 1-1/2 phillips ovalal 82 degree | 2500 |
| |
| Brikksen | FL | Machine Screw | Plain / Furnace Black | 5/16-18 x 1 3/4 | 5/16-18 x 1-3/4 phillips flat 82 degree | 626 |
| |
| Brikksen | FL | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | #6 x 3/4 | #6 x 3/4 square socket flat 82 degree | 1000 |
|
| SWACO | OH | Socket Head Cap Screw | ASTM A574 | Plain / Furnace Black | 3/8-16 x 7/8 | 3/8-16x7/8 (ft) lhcs alloy steel blk | 44 |
|
| SWACO | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 2 1/2 | #8x2-1/2 phillips flt82 type-a sts stl zp | 800 |
|
| SWACO | OH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x 3/4 x .020 | 5/16x3/4x.020 nylon flatwasher black | 1000 |
|
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2-0.40 x 4 | m2-0.40x4 ph pan ms a2ss pln | 1124 |
|
| SWACO | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/8 x 1 3/4 x 0.134 | 7/8x1 3/4x0.134 flt wash a2 (18-8) | 37 |
|
| SWACO | OH | Weld Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00-6 | M6-1.00-6h 1-proj w/pil sngl tab weld nut ss pln | 448 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | #16 | 16 pitch spiralock (spl) carbide insert 16 w/tin coating | 1 |
| |
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #8 | #8 ext tth l/w stl zi | 55550 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 3/8-24 x 2 1/2 | 3/8-24x2-1/2 hhcs gr8 zpy pt | 100 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | tnc-6c-0562 kato ss tanged insert | 175 |
| |
| Accutite | CA | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | xmas tree clip or item 120217b | 7720 |
| |||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain / Furnace Black | huck 500059 screw (8c100kcs) | 4 |
| ||
| NBS | CA | Dowel Pin | Steel | Plain / Furnace Black | 1/8 x 1/2 | 1/8x1/2 dowel pin 0.0008 over size alloy bright finish (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain / Furnace Black | 1 x 2 | 1x2 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Field Fas | IL | Collets | Steel | collet (no-replacement) | 1 |
| ||
| Field Fas | IL | Rivet Installation Tools & Accessories | Plain / Furnace Black | ebbert pulling head | 4 |
| ||
| OneMonroe | MN | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | 2 x 1/4 | 2x1/4 round hd u-drive st z rohs | 9000 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 5/8 x 3 1/2 | 5/8 x 3 1/2 gr5 hhc | 32 |
|
| OneMonroe | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain / Furnace Black | M5-0.10 | 5mm x .130-225 klik rivet nut-ribbed | 25 |
| |
| OneMonroe | MN | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain / Furnace Black | yokerigid6x2kanigen | 180 |
| ||
| OneMonroe | MN | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 4 x 4 | 4 x 4 butt hinge with removable pin stainless | 13 |
| |
| OneMonroe | MN | F436 Round Structural Washer | Steel | Plain / Furnace Black | 1 | 1 f436 structural flat washers-plain | 245 |
|
| OneMonroe | MN | Plow Bolt, Scraper Blade Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 gr 5 flat hd plow bolt-zp | 25 |
|
| OneMonroe | MN | Socket Head Flange Screw w/ ribs | Steel | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20 x 1/2 flanged button head socket cap screw steel zinc | 100 |
|
| OneMonroe | MN | Heavy Hex Jam Nut | Plain / Furnace Black | 5/16 | 5/16 hvy hex jam nut | 100 |
| |
| OneMonroe | MN | Machine Screw | Brass | Plain / Furnace Black | #10-24 x 3/8 | 10-24 x 3/8 slottedflat m/s brass | 47 |
|
| OneMonroe | MN | Screwdriving Insert Bits & Power Bits | Steel | 7/32 | 7/32 tamperproof pin bit 1/4in hex | 100 |
| |
| OneMonroe | MN | Machine Screw | Nylon (Polyamide) | Plain / Furnace Black | M5-0.80 x 20 | m5-.8 x 20 sl pan hd m/s nyl nat din 85a-10621062 | 600 |
|
| OneMonroe | MN | Metal Drill Bits | Steel | #6 | hss job 118deg #6 | 1 |
| |
| OneMonroe | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain / Furnace Black | M3 | m3 nutsert expendable tool | 1 |
| |
| OneMonroe | MN | Metal Drill Bits | Steel | hss job 118deg29/64 | 26 |
| ||
| OneMonroe | MN | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M6-1.00 x 45 | m6-1.0 x 45mm hex cap screw cl8.8 zinc | 500 |
|
| OneMonroe | MN | Finished Hex Nut | Steel | Zinc/Clear | M8 | nut hex m8 thread steel zinc plated din 934 | 648 |
|
| Alma Bolt | MI | Self-Tapping Thread Rolling Screw | Plain / Furnace Black | #10-24 | #10-24 thread forming tap | 6 |
| |
| Alma Bolt | MI | Threaded Rod | Grade A36 | Zinc/Clear | 1/2-20 | 1/2-20 sae zinc plated left hd low carbon thread. rod | 78 |
|
| Alma Bolt | MI | Fully Threaded Stud (All Thread) | Class 10.9 | Zinc/Clear | M10 x 1.25 x 25 | m10 x 1.25 x 25 alloy stud 10.9 zinc din 976 | 50 |
|
| Alma Bolt | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Plain / Furnace Black | #12-24 x 2 | #12-24 x 2 (#3 point) flat phillips self-drill w/wings | 1040 |
| |
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 hex head cs f.t. 316ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M4-0.70 x 35 | socket head cap screw partial thread a4 m4-.70 x 35 din 912 | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 30 | socket set screw flat point-25 per bag a2 m5-.80 x 30 din 913 | 70 |
|
| Brikksen | FL | Barrel Nut (Dowel Nut, Cross Dowel) | 316, 317, A4 Stainless | Plain / Furnace Black | #8-32 x 1/4 | #8-32 x 1/4 barrel nut slotted 316 ss | inquire |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 | 3/8-24 hex cap nut ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/2-13 x 1 1/4 | 1/2-13 x 1 1/4 soc head cs 316ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 1 | 10 x 1 1/2 phillips pan type-a steel/zinc/painted red | inquire |
|
| Brikksen | FL | Finished Hex Nut | Brass | Plain / Furnace Black | M5-0.80 | hex nut brass m5-.80 brass din 934 | 600 |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 x 1 1/2 | 1/2 x 1-1/2 hex lag screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | Aluminum | #12 | #12 cushion clamp aluminum | inquire |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 1/2 | 6-32 x 1-1/2 phillips ovalal m/s ss/chrome plate- | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 89 | fully threaded stud a2 m8-1.25 x 89 din 976 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 3/8-16 x 7 | 3/8-16 x 7 hex head cs 316ss | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 2 | 3/8-16 x 2 skt set cup pt ss | inquire |
|
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M22-2.50 | hex jam nut (type-b thin) a2 m22-2.5 din 439 | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-28 x 5/8 | 1/4-28 x 5/8 socket set cup point ss | inquire |
|
| Brikksen | FL | Machine Screw | Silicon Bronze | Plain / Furnace Black | 3/8-16 x 3 | 3/8-16 x 3 slotted flat head m/s silicon bronze 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #10-24 x 1/2 | 10-24 x 1/2 phillips ovalal m/s 316ss | 2000 |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 x 2 | 1/2 x 2 hex lag screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 5/8-11 x 12 | 5/8-11 x 12 hex head cs 316ss w/6 thread | inquire |
|
| EASTERN SCREW | RI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 2 1/8 | 10-32 x 2-1/8 phillips flat 18-8 | 1375 |
|
| Bossard | AZ | Self-Clinching Stud | Steel | ASTM F1941-10 Fe/Zn-Ni | rev c stud steel zinc nickel penn engineering | 380 |
| |
| Optimas | IL | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 95 | m8-1.25 x 95mm hex cap screw cl 10.9 zinc nylon patch per drawing ppap | 1091 |
|
| HYBROCO | MI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 hhcs gr5 zn | 200 |
|
| Empower H | IL | Latches & Catches | Steel | Zinc/Clear | 2990dslfast eye snap w/double safety latchplated drop forged alloy steeloverall length-5-1/4 snap opening-5/8 eye size-1 proof load-5 000 lbs | 470 |
| |
| Delta | TX | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | nylon insert flange nut 18-8 sst 1/4-20 | 213 |
|
| Delta | TX | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 3/8 | low hd soc c/s 18-8 sst 5/16-18 x 3/8 | 93 |
|
| Coburn Myers Fastening Systems | PA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | fail | tooth lock washer (int. & ext.) carbon steel zinc/clear | inquire |
|
| Coburn Myers Fastening Systems | PA | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | fully threaded stud (all thread) a194 grade b7 plain | 92 |
| |
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | 316, 317, A4 Stainless | Plain / Furnace Black | finished hex nut 316 stainless plain | 21 |
| |
| AIH | AZ | 12 Point Flange Screw (CounterBore) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 1/4-28 x 3/4 | 1/4-28x.750 l bolt 12 point a286 | 1 |
|
| AIH | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 2.114 x .070 | o-ring id2.114xw.070in buna-n | 16 |
|
| AIH | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Plain / Furnace Black | #10-32 x 1.5 | insert s/s MS124695 | 736 |
|
| Brikksen | FL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 316, 317, A4 Stainless | Plain / Furnace Black | M6-1.00 | hex flange nut serrated a4 m6-1.0 serrated din 6923 | inquire |
|
| Brikksen | FL | Countersunk Finishing Washer | Brass | Plain / Furnace Black | #10 | #10 finish washer brass 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 | 10-24 x 1 slottedround m/s ss | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 3/4 | 10-24 x 1-3/4 flat soc cs ss | 4000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 7/8 | 5/16-18 x 7/8 socket set cup point ss | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M8-1.25 x 20 | flat socket head cap screw full thread-10 per bag a4 m8-1.25 x 20 din 7991 | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 flat socket cs 316ss | inquire |
|
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/8-24 x 1/2 | 3/8-24 x 1/2 socket set cup point 18-8 stainless | 38 |
| |
| OneMonroe | MA | Machine Screw | Steel | Zinc/Yellow | #4-40 x 1/2 | 4-40 x 1/2 phillips pan m/s yellow zn | 8632 |
|
| Empire | WA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain / Furnace Black | #12-14 x 3/4 | 12-14x 3/4 hwh self drill scr | 50 |
|
| Empire | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6-20 x 3/4 | #6-20 x 3/4 flat sqdr t/s zp | 400 |
|
| Empire | WA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/2 | 1/2 internal tooth l/w zp | 1600 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-28 x 1 1/2 | 1/4-28 x 1-1/2 hex cap gr 5 zinc | 320 |
|
| Longhorn | TX | Finished Hex Nut | Grade 5 | Plain / Furnace Black | 1-8 | 1-8 hex nut left-hand gr 5 plain | 3 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 5/8-11 x 4 | 5/8-11 x 4 hex cap screw gr 8 zinc | 60 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 3 1/4 | hex cap screws grade 2 zinc 3/8-16 x 3-1/4 | 1565 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 5/16 | hex trim head ms 304 ss #4-40 x 5/16 | 2153 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 300 | regrip 300 ss roofing screws-black-#12 x 2 | 1000 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/8-11 x 4 | hex cap screw 5/8-11 x 4-yellow zinc-grade 8-usa | 500 |
|
| Raw Produ | NJ | Lock Nut, Nylon Insert | Grade 8 | Plain / Furnace Black | 7/16-14 | nylon lock nuts grade 8 7/16-14 | 925 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | phillips pan head self drilling screws cr+3 zinc #10-16 x 3/4-#3 point | 500 |
| |
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1 | socket cap screws 304 ss #8-32 x 1 | 2582 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Galvanized | #10 x 3 | fastgrip mini driller self drilling screws mechanical galvanized #10 x 3 burgundy | 50 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 6 | hex cap screws grade 2 zinc 3/8-16 x 6 | 96 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 17 | procap ss cap roofing screw 17 point-burgundy-#10 x 2-1/2 | 500 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10-16 x 3/8 | phillips flat head self drilling screws cr+3 zinc #10-16 x 3/8 | 500 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | Steel | Chrome Plated | 1/4-28 x 1/2 | button head socket cap screws chrome 1/4-28 x 1/2 mpb419 | 68 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-24 x 2 | flat head socket cap screws 304 ss 5/16-24 x 2 | 301 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1/2 | torx pan head ms 304 ss #6-32 x 1/2 | 768 |
|
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | insert hcoil# t3585-2c246 | 4000 |
| ||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | wn-440-0cu pem self-locating projection weld nut | 4 |
| ||
| AEROSPCE | MN | Structural Blind Rivet | 02221-00815 avdel hemlok str 1/4 pr st | 3000 |
| |||
| AEROSPCE | MN | Thumb Screw (Plain) | Steel | Plain / Furnace Black | 12-13-304-11 southco knurled head screws | 69 |
| |
| AEROSPCE | MN | so-032-16zi pem .500longref#nas1129-3-16z thru-hole | 1494 |
| ||||
| AEROSPCE | MN | Latches & Catches | ac-cab0-3-0782-076 southco cable assembly int latch brp next | 900 |
| |||
| AEROSPCE | MN | Solid Rivet | Aluminum | Plain / Furnace Black | ms20426ad5-12 rivet | 500 |
| |
| National | Ont | welded retainer 9 x 5.02 oblong hole steel geomet | 945 |
| ||||
| National | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5-8.00 x 912 | m2.5x8 hex skt cs ft ss din 912 | 400 |
|
| National | Ont | Wedge Stud Anchor | Steel | Zinc/Clear | 1/2 x 2 3/4 | 1/2x2-3/4 redhead wedge anch sz | 100 |
|
| National | Ont | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | 5/16-18 | 5/16-18 hex serrated flange nut st sz | 1850 |
|
| National | Ont | Finished Hex Nut | Steel | Plain / Furnace Black | M6-1.60 | m6x1.0 hex nut w/plt for aa184 | 3304 |
|
| Mansco | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 6-32 x 2-1/4 button hd t10 6-lobe extra soc cap scr 18-8 s.s. w/al-2000 black | 7750 |
| |
| Mansco | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | M4-0.70 x 30 | M4-0.7x30 button hd 6-lobe t15 soc cap scr 18-8 s/s chrome | 2500 |
|
| AFI | FL | Machine Screw | Brass | Plain / Furnace Black | #10-32 x 5/8 | 10-32x5/8 phil pan ms brass () | 11799 |
|
| AFI | FL | Quick Access Panel Fasteners (1/4 Turn etc.) | quick-opening captive screw southco 12-13-304-12 | 22 |
| |||
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Zinc/Clear | 1-12 f/r heli-coil ins rohs | 3 |
| |
| Olander | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 8-16 x 3/8 phil pan t-f 48-2 stl znc | 5329 |
| |
| Olander | CA | Finished Hex Nut | Steel | Zinc/Clear | 1/2-13 hx nut stl blk rohs | 42 |
| |
| Olander | CA | Flat Washer | Steel | Plain / Furnace Black | #6 flat washer al(156 x 375 x 016) | 919 |
| |
| Olander | CA | Round Female/Female Standoff | Aluminum | Zinc/Clear | m3-.5 x 8l x 6mm rnd fem standoff alum rohs | 150 |
| |
| Olander | CA | Flat Head Socket Cap Screw | Class 10.9 | Plain / Furnace Black | m4-.7 x 35 flat soc 10.9 | 204 |
| |
| Olander | CA | Solid Rivet | Aluminum | Plain / Furnace Black | 5/32 x 3/8 100 deg countersink rivet | 682 |
| |
| Olander | CA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 1 1/4 hex hd gr 2 zn cr3 | 16 |
| |
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 2 |
| |||
| Olander | CA | Flat Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | f/w teflon .090-.250-.010 () () | 3700 |
| |
| Olander | CA | Machine Screw | 316, 317, A4 Stainless | Zinc/Clear | M2.5-0.45 x 6 | m2.5-.45 x 6 pozi pan 316 sst rohs () () | 1700 |
|
| Olander | CA | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Clear | 5/64 x 5/16 | 5/64x5/16 dowel pin 416 sst rohs () | 1402 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | 1/2-13 | 1/2-13 light hex full height flexslot steel plain 20faf-813 | 116600 |
|
| Komar | IL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1/2 | 3/8-16x1/2 socket set-cup pt 18-8 ss | 1070 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 heavy hex thin height flexslot steel zinc | 3978 |
|
| Stelfast | OH | Wedge Stud Anchor | Steel | Galvanized | 5/8 x 7 | 5/8x7 wedge anchor w/fhn&sae washer assem hdg | inquire |
|
| Stelfast | OH | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 1/4 x 1 | 1/4x1 phil pan hd self drill scr #3 point bsd zp | inquire |
|
| Parker | AZ | Socket Head Cap Screw | Steel | Plain / Furnace Black | #10-32 x 3/4 | 10-32 x 3/4 socket head cap screw-asme b18.3 3/4 thread ff-s-86e w/am #4 302hq s/s per nas1351c3-12 dual cert ms16996-12 made in u.s.a. | 20360 |
|
| THRDFAST | AL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain / Furnace Black | #6 x 1/2 | t-316 ss phil flat t/s b18.6.4 | 100 |
|
| THRDFAST | MS | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Steel | Zinc/Clear | 5/16-18 x 1/2 | hex fl/b locking serr. | 360 |
|
| THRDFAST | OK | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 1 1/2 | 18-8 ss fender | 410 |
|
| THRDFAST | OK | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain / Furnace Black | 1 1/4-7 x 3 1/4 | a325 type-1 str/b domestic b18.2.1 b18.2.6 | 2 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-8 x 4 1/4 | astm a193 b7 all thread stud teflon blue | 509 |
|
| Lightning | LA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-2.00 x 70 | socket capscrew a-2 ss | 452 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M14-2.00 x 50 | socket c/s | 142 |
|
| Lightning | LA | Hex Head Cap Screw | Nylon (Polyamide) | Plain / Furnace Black | 1/4-20 x 1 | hex c/s | 367 |
|
| Lightning | LA | Socket Head Cap Screw | Class 8.8 | Plain / Furnace Black | M6-1.00 x 10 | low soc capscrew gr. | 400 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
