Buy from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
OneMonroe | NC | Finished Hex Nut | Steel | Plain | #5-40 | nut 5-40 | 6 |
|
OneMonroe | NC | Finished Hex Nut | Steel | Zinc/Clear | M5-0.8-0.80 | zinc plated steel hex nut low-strength m5x0.8 thread size 8mm wide 4mm ht packs of 100 | 100 |
|
OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | lock nut | 200 |
| |
OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | M10-1.5-1.50 | m10-1.5 zinc acorn nut din 1587 | 100 |
|
OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | M10-1.5-1.50 | m10-1.5 zinc plated cold forged wing nut | 50 |
|
OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M5-0.8-0.80 | m5-0.8 class 10 zinc plated top lock nut din 980 | 250 |
|
OneMonroe | NC | Castle Nut (Hex) | Steel | Zinc/Clear | M8-1.25-1.25 | m8-1.25 zinc castle nut din 935 | 200 |
|
OneMonroe | NC | Finished Hex Nut | Steel | Plain | M12-1.75-1.75 | non serrated fl nut m12-1.75 plain | 334 |
|
OneMonroe | NC | Finished Hex Nut | Class 10.9 | Zinc/Clear | M22-2.5-2.50 | m22-2.5 zinc plated steel class 10 hex nut din 934 | 15 |
|
OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 4 x 3 wheel mat steel finish zinc top plate sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 5 x 3 wheel mat steel finish zinc top plate sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 6 |
|
OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers swivel lock accepts wheel sz 5 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers swivel lock accepts wheel sz 6 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers and swivel lock accepts wheel sz 10 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 2 |
|
OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | 18-8 stainless steel hex nut m6 size 1mm pitch 10mm width 5mm height coo | 500 |
|
OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75-1.75 | 18-8 stainless steel hex nut m12 x 1.75 mm thread (pack of 25) | 50 |
|
OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 | 18-8 stainless steel hex nut 4-40 thread size (pack of 100) | 400 |
|
OneMonroe | NC | High Hex Nut | 316, 317, A4 Stainless | Plain | M12-1.75-1.75 | super-corrosion-resistant 316 stainless steel thin hex nut m12 x 1.75 mm thread 6 mm high (pack of 10) | 350 |
|
OneMonroe | NC | Flange Nut, Non-locking | Steel | Plain | M6-1.0-1.00 | m6-1.0 non serrated flange nut plain | 275 |
|
OneMonroe | NC | Weld Nut | Steel | Plain | M6-1.0-1.00 | m6-1.0 flanged weld nut plain | 26738 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.