FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Electrical Lugs & Terminals | 22-18 | etc molex# aa-838-06t 22-18 ga terminal spade/red q2a | 1500 |
| ||
| Century | FL | Cushioned Pipe & Tube Loop Clamp | Plain | 21 | ms21919wdg21 | 60 |
| |
| Century | FL | Flat Washer | Steel | Zinc/Yellow | M5.0 | m5.0 steel zinc yellow flat washers din 125 | 476 |
|
| Century | FL | Flat Head Socket Cap Screw | Plain | #10-24 x 3/8 | ms24671-19s316 | 4522 |
| |
| Century | FL | Blind Rivet | Plain | 5/32 (.251-.312) | cherry cr2539p-5-08 vechecr2539p-5-08 | 593 |
| |
| Century | FL | Hex Head Cap Screw | Steel | Plain | M4 x 16 | bae ip1077p407016bd rev. a sems hhcs+rlw+nfw cres m4x16 bae systems ip1077p407016bd | 1176 |
|
| Century | FL | Beveled Washer (Round & Square) | Steel | Zinc/Clear | M12 | m12 square bevel washer steel zinc plated din 434 | 200 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/4 | 1/4-20 x 2 1/4 socket cap 1/4-20 x 2 1/4 socket cap fully threaded stainless | 225 |
|
| Century | FL | Machine Screw | Steel | Cadmium/Yellow | #4-40 x 5/16 | nas514p440-5p screw | 1275 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | Ka30 x 10 | bn13578 ka30 x 10 phillips pan/washer pt screw steel zinc rohs clear | 1000 |
|
| Century | FL | 10-5200 screw fil sltd #8-32unc-2a .75 lng 316 cres parker 10-5200 | 435 |
| ||||
| Century | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 35 | m 4.0 x 35.0mm 18-8 flat hd soc hd cap screws din 7991 | 270 |
|
| Century | FL | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 06 | nas1829c3a06 post elmch eqpt | 9 |
|
| Century | FL | Machine Screw | Plain | #4-48 x 3/16 | ms51958-12 | 195 |
| |
| Century | FL | nas1122e46 | 471 |
| ||||
| Century | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 3/8 | 3/8-16 x 1 3/8 hex hd.cap screw 18-8 | 575 |
|
| Century | FL | Internal Type HO Retaining Ring | Steel | Zinc/Yellow | M88 | m88 steel zinc yellow din 472 | 58 |
|
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .125 x .312 x .032 | #4 flat washer .125 x .312 x .032 18-8 15795-804 | 289 |
|
| Century | FL | Machine Screw | Aluminum | Anodized | #10-32 x .906 | ms27039dd1-14 screw | 3548 |
|
| SWACO | OH | Hex Machine Bolt | Titanium | Plain | bolt titanium hex drive | 89 |
| |
| SJS Prod | CA | 6 x 6 ziplock bag 2mil | 590 |
| ||||
| SWACO | OH | Machine Screw | Brass | Plain | M6-1.00 x 35 | m6-1.00x35 slotted pan machine screw brass din 85a | 696 |
|
| SWACO | OH | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3/4 | #10-24x3/4 carriage bolt 18-8 | 46 |
|
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #4 | #4 internal tooth lockwasher steel zinc w/trivalent chromate rohs compliant | 43900 |
|
| SWACO | OH | Solid Rivet | Aluminum | Plain | 100 | solid rivet 100 precision head | 4610 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 8 | Plain | 7/16-20 x 5 1/2 | 7/16-20 x 5-1/2 gr.8 hx hd c/s-yz | 10 |
|
| GLF | OH | Pipe Plugs (Hex Head) | plug an806-16j | 42 |
| |||
| GLF | OH | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 1 1/4 | #10 x 1-1/4 torx pan hd security tek screw 410 s/s | 25 |
|
| GLF | OH | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M4-0.70 x 6 | m4-0.7 x 6 pozi pan hd trilobe screw stl zc din 7500 | 617 |
|
| GLF | OH | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32 x 1/2 hwh slotted tcs type-f zinc cr3 | 1000 |
|
| GLF | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/2 | #8-32 x 1/2 phillips truss hd m/s 18-8 s/s | 500 |
|
| GLF | OH | Hex Head Cap Screw | Grade 5 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hhcs gr 5 stl geomet | 12 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M6-1.00 x 16 | m6-1.0 x 16mm cl.10.9 type-b frame bolt-non-indented-non-serrated-trivalent rohs jis 1189 | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 7/16-14 x 2 | 7/16-14 x 2 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M5-0.80 x 16 | M5-0.8x16 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) din 6921 | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M16-2.00 x 55 | M16-2.0x55 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| NBS | CA | Dowel Pin | Steel | Plain | 3/16 x 3/16 | 3/16x3/16 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 5/64 x 7/8 | 5/64x7/8 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M14-1.50 x 40 | m14-1.5 x 40mm cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 3/4-16 x 3 | 3/4-16 x 3 gr.8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| Field Fas | IL | Rivet Installation Tools & Accessories | Plain | huck nose (10-floor) 256 | 6 |
| ||
| CIF | IL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M12-1.75 | m12 x 1.75 hex flange nut class 10 magni black iso 4161 | 8992 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M8-1.25 x 60 | m8 x 1.25 x 60 hex flange bolt 10.9 phos coated per emd 1262 ( ) iso 4162 | 43 |
|
| CIF | IL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | 1 1/4-7 x 3 1/4 | 1 1/4-7 x 3 1/4 heavy hex bolt a325 hot dipped galvanized | 69 |
| |
| OneMonroe | MN | Lock Nut, Nylon Insert | Steel | Plain | 3/4-16 | 3/4-16 unf-3b ne series nylon insert locknuts steel plain finish | 20 |
|
| OneMonroe | MN | Knobs & Star Grips | simsbury dummy knob lockset | 2 |
| |||
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-16 x 2 1/2 | 3/4 x 2 1/2 nf gr5 hhc zp | 40 |
|
| OneMonroe | MN | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32 x 1/2 phillips pan thread rolling screw zp | 8359 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 40 | m4-.7 x 40m phillips pan m/s stainless | 50 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 5 1/4 | 3/4-10 x 5 1/4 a193 b7 studs w/2 hvy 2h nuts assemble sc-1 | 6 |
|
| OneMonroe | MN | Sprockets | Plain | 3/4 | 60b sprocket 3/4 stock bore 14 hardened teeth | 129 |
| |
| OneMonroe | MN | Pipe Coupling, Pipe Connector | Brass | 3/8 x 3/4 | 3/8 x 3/4 compression female connector brass | 5 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M8 x 80 | m8 x 80 shc 12.9 | 48 |
|
| OneMonroe | MN | Solid Rivet | Plain | 4-5 | ac 4-5 rivet | 15 |
| |
| OneMonroe | MN | Machine Screw | Plain | #45 x 5/16 | torx #45 x 5/16 hex shank x 1-1/4 | 125 |
| |
| OneMonroe | MN | Square Nut | Steel | Plain | #8-32 | 8-32 nut retainer-sq hole dia. .281 panel range .025/.063 steel black | 2500 |
|
| OneMonroe | MN | Self-Tapping Self-Drilling Screw (Tek etc.) | Plain | #8 x 3/4 | #8 x 3/4 phillips modified truss tek-gray head | 6000 |
| |
| OneMonroe | MN | Screwdrivers | 9/64 | 9/64 screw driver ballldriver tip | 1 |
| ||
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slottedround m/s plated | 7 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | M12-1.25 x 30 | m12 x 1.25 x 30m socket cap screw | 13 |
|
| OneMonroe | MN | L-Wrenches, Allen Wrenches & Torx Wrenches | 7/64 | 7/64 short hex key | 223 |
| ||
| OneMonroe | MN | Latches & Catches | latch bar | 10 |
| |||
| Alma Bolt | MI | Tooth Lock Washer (Int. & Ext.) | Plain | 7/16 | 7/16 internal/external star washer | 825 |
| |
| Alma Bolt | MI | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5 5/8 x 7 1/4 x 2 | 1/2-13 5 pipe #029ss stainless steel u-bolt | 18 |
|
| Alma Bolt | MI | Set Screw (Socket Head) | Plain | 5/16-24 x 1 1/4 | 5/16-24 x 1 1/4 sae socket set screw cup point | 710 |
| |
| Alma Bolt | MI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 1/2 | #10-24 x 2 1/2 st st ovalal phillips m/s | 983 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #10-32 x 1 1/4 | 10-32 x 1-1/4 phillips pan m/s ss blk ox | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M12-1.75 x 120 | hex head cap screw partial thread a4 m12-1.75 x 120 din 931 | 1000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 3/4 | 1/2-13 x 3/4 soc set cup pt ss | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | M5-0.80 x 8 | socket set screw cup point a4 m5-.80 x 8 din 916 | inquire |
|
| Brikksen | FL | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 | 10-32 hex ms nut ss 100 per box f-72box | inquire |
|
| Brikksen | FL | Lag Screw | 316, 317, A4 Stainless | Plain | 1/2 x 2 1/2 | 1/2 x 2-1/2 hex lag bolt 316ss | inquire |
|
| Brikksen | FL | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/2 | 8-32 x 1/2 phillips pan ms ss w/ext sems washer | 20000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/4 | 14 x 1-1/4 square truss type-a ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #6 x 1/2 | #6 x 1/2 phillips flat head sms type-a 316 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 60 | socket head cap screw partial thread a4 m4-.70 x 60 din 912 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 4 | 3/8-16 x 4 phillips flat m/s ss f/t | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | .535 x 1.062 x .095 | 1/2 flat washer 15795-818 316 ss .535 id x 1.062 od x .095 thk 100 per small bag 5 small bags per master pack-generic brand | 16000 |
|
| Brikksen | FL | Lag Screw | Steel | Zinc/Clear | 3/8 x 1 1/2 | 3/8 x 1-1/2 hex lag bolt st/zc | inquire |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 | split lock washer-100 per bag a2 (1.4310) m4 din 127b | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 30 | socket set screw flat point-25 per bag a2 m5-.80 x 30 din 913 | inquire |
|
| Brikksen | FL | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | .218 x .500 x .050 | #10 sae flat washer 1/2 od .050 thick 18-8ss/black xylan .218 id x .500 od x .050 thick | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #14 x 5 | 14 x 5 hex washer tek 410ss #3 point | inquire |
|
| Brikksen | FL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8-24 flange nut 18-8 ss with serrations | 2000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 5/8 | 8-32 x 5/8 phillips ovalal m/s 316ss | 22000 |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 2 | 5/16 x 2 hex lag bolt ss | 11000 |
|
| Bossard | AZ | Hex Head Cap Screw | Steel | Zinc/Clear | m5 x 16 screw hex head steel zinc | 39 |
| |
| Bossard | AZ | stud flush aluminum penn engineering | 73 |
| ||||
| Bossard | AZ | Finished Hex Nut | Plain | hex nut per bn117 | 2368 |
| ||
| Bossard | AZ | nut locking dry film lube penn engineering | 10366 |
| ||||
| FSP | IL | Carriage Bolt | Grade 5 | Zinc/Clear | 5/16-18 x 1 1/2 | carriage bolt 5/16-18 x 1-1/2 gr.5 zinc | 2812 |
|
| Optimas | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/4 | 4-40 x 1/4 phillips flat 100 deg machine screw 18-8 ss | 4124 |
|
| Optimas | IL | Pipe Cross | Aluminum | Painted | 12.6 x 2.0 x 1.5 | 12.6x2.0x1.5 support cross tie bar w/holes aluminum primr painted per dwg (i) | 55 |
|
| American | WI | Protective Caps & Plugs | 1/2 | heyco kos 1/2 (7/8 hole) grey knock-out plug | 525 |
| ||
| Empower H | IL | Eye Bolt | Steel | Galvanized | eb58x8hdgregular nut eyebolthank diameter 5/8 length 8 drop forged steelhot dipped galvanizedworking load limit (lbs) 5 200 | 250 |
| |
| Delta | TX | Hex Head Cap Screw | Silicon Bronze | Plain | 1/4-20 x 2 | hx hd c/s silicon bronze 1/4-20x2 | 1300 |
|
| AFT Faste | TX | Ear Plugs & Hearing Protection | howard leight thunder1/2 earmuffs t3h cap mount nrr 27 black | 8 |
| |||
| Coburn Myers Fastening Systems | PA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | heavy hex bolt (b7 b8 a307b etc.) a307 grade b8 plain | 11 |
| |
| Coburn Myers Fastening Systems | PA | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | threaded rod 18-8 stainless plain | 3 |
| |
| Siena | IA | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | M10 x 2 | 10x2 hex washer head self drilling screw 410 s/s steel plain finish # 3 point ifi 113 | 736 |
|
| Surpless, | IL | Metal Drill Bits | skt trx bit int 3/8 dr t (1 pc per box) | 4 |
| |||
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 1/4 | 10-32 x 1-1/4 flat soc cs ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 3/4 | 3/8-16 x 1-3/4 soc hd c/s 316s | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 hex washer tek 410ss #2 point | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/2 | 14 x 1-1/2 phillips flat type-a ss 100 per box f-24box | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 6 | slotted cheese head machine screw-50 per bag a2 m5-.80 x 6 din 84 | inquire |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #48 | #48 (3 ) cushion clamp 18-8 ss | 800 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/2 | 8-32 x 1/2 torx pan m/s ss | inquire |
|
| Brikksen | FL | Clevis Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 clevis pin (el=2/oal=2.25) 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Hewes | NY | Solid Rivet | Brass | Plain | #rvt-001-16 rivet per print brass | 7100 |
| |
| Hewes | NY | Snap Bushings, Strain Relief Bushings | Nylon (Polyamide) | Plain | black nylon bushing per print | 3100 |
| |
| Komar | IL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | 10-32 x 1/2 flat soc cap screw 18-8 ss |
| |
| FasSpcMfg | FL | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3/8 (3/8-16) | 1/2 x 3/8 socket shoulder bolt 18-8 stainless 3/8-16 x 5/8 thread | 400 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 3/8-24 x 1 1/4 | 3/8-24 x 1 1/4 low head soc cap alloy | 4 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #10-32 x 7/8 | 10-32 x 7/8 hex cap hastelloy c 276 | 25 |
|
| OneMonroe | MA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1-8 x 5 1/2 | 1-8 x 5 1/2 (pt) a325 type-1 heavy hex structural bolt plain | 349 |
| |
| Empire | WA | Safety Glasses & Eye Protection | safety glasses smoke lens w/ black temple tips | 24 |
| |||
| Empire | WA | Machine Screw | Nylon (Polyamide) | Plain | #6-32 x 3/8 | 6-32 x 3/8 pan slot m/s nylon | 44886 |
|
| Longhorn | TX | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 18 | m5-.8 x 18mm hex cap screw s/s | 268 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hex cap gr 5 zinc | 245 |
|
| Raw Produ | NJ | Split Lock Washer | Steel | Zinc/Clear | 7/16 | split ring lock washers zinc 7/16 | 2222 |
|
| Raw Produ | NJ | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | fastgrip 300 ss sp with 1/2 od bonded washer-crimson red-#9 x 3 | 1000 |
|
| Raw Produ | NJ | Turned, Ground & Polished Shafting | Plain | 39 | external shaft rings sh-39ss | 1152 |
| |
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-48 x 7/8 | socket cap screws 304 ss #4-48 x 7/8 | 2221 |
|
| Raw Produ | NJ | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | metric keps k lock nuts a2 ss m3 | 4355 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | s-m6-1zi pem self-clinching nut heat treated | 4959 |
| ||
| AEROSPCE | MN | Installation & Setting Tools | Steel | 632 | 7571-06b 632 helicoil hand installation tool | 1 |
| |
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain | 01821-00505 avdel briv speed fastener riv 01821-00505 | 18200 |
| |
| AEROSPCE | MN | bso-440-14zi pem .437longref#nas1129-04-b-14z blind | 6535 |
| ||||
| National | Ont | u-shaped extruded channel 50ft | 5000 |
| ||||
| National | Ont | Flat Head Socket Cap Screw | Class 10.9 | Plain | M6 x 8 | m6x8 flat skt cap 10.9 din 7991 | 200 |
|
| National | Ont | Machine Screw | Steel | Zinc/Clear | #10-32 x 1 1/2 | 10-32x1-1/2 hex slotted ms sz rohs | 30418 |
|
| National | Ont | Hex Head Cap Screw | Steel | Plain | 5/8-11 x 1 | 5/8-11x1 hex cap g5z | 250 |
|
| AFI | FL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Class 8.8 | Zinc/Clear | M3-8.00 | M3 serrated hex flange nut c8 st zn din 6923s () | 11099 |
|
| AFI | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M2.5 x 5 | m2.5x5 soc hd cs 316 ss din 912 () | 1126 |
|
| AFI | FL | Blind Rivet | Steel | Plain | 1006-1010 | c1006-c1010 steel body/steel mandrel () | 17399 |
|
| AFI | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M6 x 18 | m6x18 hex hd cs ft c8.8 st zn din 933 () | 680 |
|
| Global Fa | TX | Round Spacer | Aluminum | Chromate Conversion (Iridite, Alodine) | #6 | #6 (.140x1/4x1-1/2) aluminumround/spacer iridite keystone electronics 3469 | 15 |
|
| Olander | CA | Set Screw (Socket Head) | Steel | Plain | m4-.7 x 16 soc set cup pt lt patch alloy | 514 |
| |
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | m4-.7 x 6 pozi pan patch sst rohs | 1 |
| |
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | associated spring comp spring sst | 3 |
| ||
| Olander | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2-56 x 1 1/2 flat soc sst rohs | 236 |
| |
| Olander | CA | Flat Head Socket Cap Screw | Steel | Plain | 10-32 x 5/8 flat soc alloy black | 576 |
| |
| Olander | CA | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2-56 x 5/16 phil pan int sems sst rohs | 20 |
| |
| Olander | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 4-24 x 3/4 phil pan t-b stl zn cr3 rohs | 1725 |
| |
| Olander | CA | Flat Head Socket Cap Screw | Class 10.9 | Plain | m6-1.0 x 35 flat soc 10.9 | 100 |
| |
| Olander | CA | Self-Clinching Stud | Steel | Zinc/Clear | thin hd self clinch stud stl zn () () | 12992 |
| |
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | associated spring comp spring sst () () | 17 |
| ||
| Olander | CA | Sems Machine Screw | Steel | Black Oxide | #8-32 x 1/2 | 8-32 x 1/2 phil pan ext sems stl blk () () | 2088 |
|
| Olander | CA | High Collar Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6 high collar l/w sst rohs | | 2279 |
| |
| F. Solutions | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 16 | lo socket head cap screw 7984 m6-1.0x16 a2 | 150 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 3/16 x 13/16 | universal head 2024-t4 aluminum i/a/w rev 2 3/16 x 13/16 clear anodize mil-a-8625 MS20470DD6-13A | 15.0555 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/8 x 5/16 | universal head 5056-h32 aluminum i/a/w rev 2 1/8 x 5/16 gold chem film-mil-dtl-5541 MS20470B4-5 | 120.657511665765 |
|
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | x .010 | flat hd steel rivet-nut open end rev 12 10-24 thread x .010-.080 grip cadmium NAS1329S3E-80 | 15221 |
|
| Rapid | NY | Service & Repair Kits | Steel | M#10-24 | PLIER STYLE INSTALLATION HAND TOOL AA170 | 1 |
| |
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | 12 5/16-18 x .200 | flat hd steel rivet-nut closed end rev 12 5/16-18 thread x .200-.275 grip cadmium NAS1329S5EB275 | 300 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 3/32 x 3/16 | mod.brazier hd.2017-t4 aluminum 3/32 x 3/16 AN456D3-3 | 6.1 |
|
| Rapid | NY | Semi-Tubular Rivet | Steel | Zinc/Clear | .123 x 13/32 | oval head steel semi-tubular .123x13/32 zinc & clear chromate | 94741 |
|
| Rapid | NY | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 100deg.countersink 305 stain.steel solid-drill 3/16x3/16x9/32 hd.dia.x.050/.060 head height borg warner | 0.2569 |
| |
| Rapid | NY | Solid Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 281 | 100deg.countersink.flush shear hd.monel i/a/w rev 12 5/32 x 9/32 per qq-n-281 NAS1200M5-4-5 | 115.1698 |
|
| Arden | WI | Machine Screw | Steel | Zinc/Yellow | #6-32 x 1/2 | 632x1/2 slotted pn ms zy | inquire |
|
| Arden | WI | Lag Screw | Steel | Plain | 1/4 x 1 3/4 | 1/4x1 3/4 hex lag pln | inquire |
|
| IRF | NC | Flat Washer | Steel | Zinc/Clear | .125 x .437 x .062 | f/w | 14970 |
|
| ASFCORP | MI | F436 Round Structural Washer | Steel | Zinc/Clear | 3/8 | 3/8 f436 ty 1 flt wshr tri zn dich fe/zn 5cn pkg | 20 |
|
| ASFCORP | MI | Flat Head Socket Cap Screw | Steel | Black Oxide | 5/16-18 x 3/8 | 5/16-18 x 3/8 flt hd soc cap blk ox pkg | 95 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 3/8-6 x 9 | gr5 hex c/s b18.2.1 | 1 |
|
| THRDFAST | AL | Button Head Socket Cap Screw | Steel | Plain | 1/2-13 x 1 3/4 | button soc c/s b18.3 | 50 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 5/16-18 x 13 1/2 | 5/16-18x13-1/2 astm a193 b8 1 all thread stud | 30 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 7/8-8 x 6 | ft astm a193 b7 all thread rod teflon blue | 60 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 3/4-10 x 10 | 3/4-10x10 astm a193 b8m 1 all thread stud | 690 |
|
| Lightning | LA | Flat Washer | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 7/8 | flat hast c276 | 791 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 1 1/8-8 x 7 1/2 | 1-1/8-8x7-1/2 astm a193 b8 1 all thread stud | 694 |
|
| Lightning | LA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M14-2.00 x 50 | hex c/s a-2 ss | 45 |
|
| Lightning | LA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50 x 100 | hex c/s wrench size=16 | 231 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
