FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | Square Nut | Steel | Zinc/Clear | 5/16-18 | 5/16-18 square nut trivalent clear zinc | 1050 |
|
| Endries | WI | Weld Nut | Steel | Plain | #10-24 | 10-24 projtn weld nut #bt1503 | 208 |
|
| Endries | WI | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12 | m12 a2 stainless nylon insert locknut din 985 | 409 |
|
| Endries | WI | Lock Nut, Nylon Insert | Grade 8 | Plain | 1/2-13 | 1/2-13 grade 8 ne series nylon insert locknut plain | 800 |
|
| Endries | WI | Flange Nut, Non-locking | Steel | Plain | M6-1.00 | 6mmx1.0 hex flange nut | 50 |
|
| Endries | WI | Hex Jam Nut | Grade 5 | Plain | 1 3/4-12 | 1-3/4-12 grade 5 finished hex jam nut plain | 2 |
|
| Endries | WI | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | 1/4-20 | c8738-1420-4 tinnerman 1/4-20 j-type speed nut phos & oil | 900 |
|
| Endries | WI | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Yellow | 1/4-20 | 1/4-20 center locknut yellow zinc and wax | 2020 |
|
| Endries | WI | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | csm3-2 m3 stainless steel self clinching nut | 7200 |
|
| Endries | WI | Weld Nut | Steel | Plain | 1/4-20 | 1/4-20 3 projection short pilot hex weld nut plain | 234608 |
|
| Endries | WI | Heavy Hex Nut | Grade 5 | Zinc/Clear | 1/2-13 | 1/2-13 grade 5 heavy hex nut zinc | 150 |
|
| Endries | WI | Slotted Round Nut (Shaft Nut) | Steel | Plain | an-28 bearing locknut | 1 |
| |
| Endries | WI | Lock Nut, Center Locking, All Metal (2-Way Reversible) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-20 | 1/2-20 18-8 stainless steel center locknut | 700 |
|
| Endries | WI | Lock Nut, Flange, w/o serrations | Grade F | Zinc/Clear | 5/8-11 | 5/8-11 grade f oval top flange locknut trivalent clear zinc and wax | 400 |
|
| Endries | WI | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 316, 317, A4 Stainless | Plain | M8 | m8 a4 stainless hex serrated flange nut din 6923 | 836 |
|
| Endries | WI | Finished Hex Nut | Steel | Phosphate | 10073 7/32 | 10073 7/32 tubular nut phosphate | 200 |
|
| Endries | WI | Coupling Nut | Steel | Plain | 5/16-18 x 1/2 x 7/8 | 5/16-18 x 7/8 coupling nut stl | 830 |
|
| Endries | WI | Cap Nut (Acorn Nut) | Grade 2 | Plain | 3/8-16 | 3/8-16 acorn cap nut-high crown gr 2 | 1000 |
|
| Endries | WI | Lock Nut, Flange, Nylon Insert | Grade F | Zinc/Clear | 5/16-18 | 5/16-18 nylon insert flange nut gr f stl znc | 24000 |
|
| Endries | WI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade 2 | Zinc/Clear | #6-32 | 6-32 grade 2 top locknut distorted thread trivalent clear zinc | 363 |
|
| MESAFAST | CA | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 | regular acorn nut 18-8 s/s 18-8 s/s | 100.0 |
|
| MESAFAST | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 | hex nut a2 18-8 304 a2 18-8 304 din 934 | 4.0 |
|
| MESAFAST | CA | Finished Hex Nut | Steel | Galvanized | 1 1/8-7 | hex nut hot dip hot dip | 14.0 |
|
| MESAFAST | CA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/4-28 | hex nut gr8 steel | 100.0 |
|
| Endries | WI | Self-Clinching Nut | Aluminum | Plain | cla-832-2 8-32x0.054 shank size aluminum self clinching nut (pem) | 30000 |
| |
| Endries | WI | Finished Hex Nut | Grade 8 | Zinc/Yellow | 3/8-24 | 3/8-24 hex finish nut gr 8 zn/ye | 1200 |
|
| Endries | WI | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | 3/8-16 18-8 stainless steel low crown acorn 5/8waf x 5/8height | 166 |
|
| Endries | WI | Weld Nut | Class 9.8 | Plain | M12 | 097-4486-00 m12 cls9 hex long pilot weld nut plain | 5100 |
|
| MESAFAST | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 | hex nut a2 18-8 304 a2 18-8 304 din 934 | 234.0 |
|
| Endries | WI | Lock Nut, Flange, w/o serrations | Grade F | Zinc/Clear | 3/8-16 | 3/8-16 hex flange nut gr f top lock stl znc | 11711 |
|
| Endries | WI | Finished Hex Nut | Nylon (Polyamide) | Plain | M5 | 11562b (oe) m5 nylon quick nut black | 2000 |
|
| Endries | WI | Finished Hex Nut | Class 8.8 | Zinc/Clear | M20-2.50 | m20-2.5 hex finish nut class 8 znc | 150 |
|
| Endries | WI | Weld Nut | Steel | Plain | 1/4-20 | 1/4-20 double tab weld nut | 32460 |
|
| Endries | WI | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | #10 | 10ab type-u speed nut .64 lg .44 wd .070-.140 grp | 6000 |
|
| Endries | WI | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 832-3 | cls-832-3 8-32x0.087 shank size 18-8 stainless steel self clinching nut (pem) | 30000 |
|
| Endries | WI | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Class 8.8 | Zinc/Clear | M16 | m16 class 8 hex serrated flange nut trivalent clear zinc din 6923 | 700 |
|
| Endries | WI | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32x3/8 width across flats 18-8 stainless steel keps nut | 1166 |
|
| Endries | WI | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 1/4-20 | 1/4-20 nylon insert l/n 316/a4 | 400 |
|
| Endries | WI | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 1/4 | 1/4 push-on retainer mech zn | 21625 |
|
| Endries | WI | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #8-32 | c814-832-4 (oe) 8-32 u-nut phosphate and oil | 3327 |
|
| Endries | WI | Hex Jam Nut | 316, 317, A4 Stainless | Plain | M30-2.00 | m30x2.0 a4 stainless thin nut 46mm width across flats x12 thick din 936 | 52 |
|
| Endries | WI | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Plain | 5/16-18 | 5/16-18 serrated flange locknut plain case hardened | 698600 |
|
| Endries | WI | Weld Nut | Steel | Plain | #10-24 | sn1510 10-24 single tab weld nut (ohio only) | 3278 |
|
| Endries | WI | Heavy Hex Jam Nut | Steel | Zinc/Yellow | 3/8-16 | 3/8-16 heavy hex jam nut tri ylw 96hr wh f1941 .0002 | 100 |
|
| Endries | WI | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | #8-32 | 8-32 serrated hex flange nut trivalent clear zinc | 9000 |
|
| Endries | WI | Castle Nut (Hex) | Grade 2 | Zinc/Clear | 5/8-18 | 5/8-18 castle nut gr 2 znc | 170 |
|
| Endries | WI | Finished Hex Nut | Steel | Zinc/Yellow | #10-32 | 10-32 hex nut w/neo washer trivalent yellow zinc | 16000 |
|
| Endries | WI | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.15 | cls-m6-0 m6x1.15 shank size 18-8 stainless steel self clinching nut (pem) | 24810 |
|
| Endries | WI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | 5/16-18 | 5/16-18 #21faf518 flexloc locknut cadmium | 200 |
|
| Wurth Ind | D.F. | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 | m12-1.75 acorn cap nut 18-8 | 162 |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 | m12-1.75 nylon insert l/nut a2ss | - |
|
| Wurth Ind | D.F. | Finished Hex Nut | Class 10.9 | Zinc/Yellow | M12-1.75 | m12-1.75 fin hex nut class 10 iso 4032 yellow zinc | - |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | Class 10.9 | Zinc/Yellow | M12-1.75 | m12-1.75 nylon insert l/nut class 10 yellow zinc | 1,100 |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | Steel | Plain | #4-40 | 4-40 nylon insert l/nut | - |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | Steel | Zinc/Clear | #4-40 | 4-40 nylon insert l/nut zn | 186 |
|
| Wurth Ind | D.F. | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M12-1.25 | m12-1.25 lock nut class 8 per din 980v zinc | - |
|
| Wurth Ind | D.F. | Finished Hex Nut | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M12-1.50 | m12-1.50 fin hex nut geomet finish | 144 |
|
| Wurth Ind | D.F. | Finished Hex Nut | Class 8.8 | Zinc/Yellow | M12-1.25 | m12-1.25 fin hex nut yz cl 8 | - |
|
| Wurth Ind | D.F. | Weld Nut | Steel | Plain | M12-1.25 | m12-1.25 hex weld nut din 929 | - |
|
| Wurth Ind | D.F. | Lock Nut, Flange, w/o serrations | Class 10.9 | Phosphate | M12-1.25 | m12-1.25 hex toplock flangenut cl10 din 6927 phos & oil | - |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M12-1.50 | m12-1.50 nylon insert l/nut zn cl 8 | - |
|
| Wurth Ind | D.F. | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Yellow | M14-2.0-10 | m14-2.0 lock nut cl 10 din 980-v yellow zinc | - |
|
| Wurth Ind | D.F. | Lock Nut, Flange, w/o serrations | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M14-1.50 | m14-1.5 hex flange nut class 10 din 6927 geomet finish | - |
|
| Wurth Ind | D.F. | Finished Hex Nut | Class 8.8 | Zinc/Yellow | M14-1.50 | m14-1.5 fin hex nut class 8 yellow zinc | - |
|
| Wurth Ind | D.F. | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Yellow | M14-2.00 | m14-2.0 lock nut class 8 din 980v yellow zinc | 1,770 |
|
| Wurth Ind | D.F. | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Class 10.9 | Plain | M14-1.5-10 | m14-1.5 hex flange nut cl 10 serrated | - |
|
| Wurth Ind | D.F. | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M14-1.5-10 | m14-1.5 lock nut zn cl 10 din 980-v | - |
|
| Wurth Ind | D.F. | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M14-2.0-10 | m14-2.0 lock nut zn cl 10 din 980-v | - |
|
| Wurth Ind | D.F. | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M16-2.00 | m16-2.0 nylon insert l/nut zinc | 1,200 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
