FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Quick Release Pin, Spring-Loaded Pin | Plain | ms17984c661 pin | 14 |
| ||
| Century | FL | Key Locking Insert (Keensert, Keysert etc.) | Plain | 102 | ms51830ca102 | 98 |
| |
| Century | FL | Hex Head Cap Screw | Plain | 1/2-20 x 3 1/4 | ms35308-420 | 376 |
| |
| Century | FL | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 | 4-40 sm pa hx ms nut 18-8 | 4472 |
|
| Century | FL | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/2 | 4-40 x 1/2 phillips pan hd int l/w 18-8 | 476 |
|
| Century | FL | airbus 22251bc050038l screw | 294 |
| ||||
| Century | FL | Machine Screw Nut | Steel | Plain | #8-32 | 8-32 hex m/s nut steel hex. chrom. free | 30000 |
|
| Century | FL | Finished Hex Nut | Class 9.8 | Plain | M10-1.50 | m10 hex nut nylon m10 x 1.5 14.8 x 9.8 micro plastics | 965 |
|
| Century | FL | Sems Machine Screw | Steel | Zinc/Clear | M3 x 6 | m3 x 6 pozi pan ext tooth l/w sems stl rohs zi clr (washer 5.85 od) part to ifi | 476 |
|
| Century | FL | Finished Hex Nut | Grade 5 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/8-16 | 3/8-16 hex nut g-5 zinc flake duplex e2a | 170 |
|
| Century | FL | Flat Washer | Black Oxide | Ma3 | a3013129-6 metric flat washer with black oxide per print rev k itar controlled | 404 |
| |
| Century | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | M6 x 12 | screw hex hd m6x12 8.8 zinc yellow din 933 | 4930 |
|
| Century | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | M3 x 12 | m3 x 12 hex hd c/s 8.8 stl zinc yellow din 933 | 9400 |
|
| Century | FL | Machine Screw | ms24693c279 | 220 |
| |||
| Century | FL | Flat Washer | Steel | Plain | .187 x .625 x .125 | parker 756333 retaining washer steel plain (.187 x .625 x .125) q2b | 159 |
|
| Century | FL | Dowel Pin | Plain | nas1712d12-24n clamp loop cushioned | 100 |
| ||
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 7/8 | 1/4-20 x 7/8 soc set flat pt sst rohs () () | 66 |
|
| Olander | CA | southco m3 phil-s pcb n () () | 138 |
| ||||
| Olander | CA | Machine Screw | Plastic | Plain | #10-32 x 1/2 | 10-32 x 1/2 slot flat delrin () () | 99 |
|
| Olander | CA | m2.2 & m2.5 heli-coil twins tbo tool | 11 |
| ||||
| Olander | CA | Round Female/Female Standoff | Aluminum | Plain | #8-32 x 1 1/8 x 3/8 | 8-32 x1 1/8x3/8 rd fem standofff alum nonroh () | 1134 |
|
| Olander | CA | Set Screw (Slotted Head) | Steel | Plain | #4-40 x 1/2 | 4-40 x 1/2 slot set scr flat pt nyl () () | 1219 |
|
| Olander | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | m3.12-1.27 x 14 torx pan type pt rohs st | 200 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M12-1.25 | 5149-12cn180 m12-1.25 f/r ovsz heli-coil ins () () | 526 |
| ||
| Olander | CA | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | miniature self clinch nut sst rohs | 340 |
| |
| Olander | CA | Set Screw (Socket Head) | Steel | Plain | m5-.8 x 5 soc set cup pt alloy | 103 |
| |
| GLF | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Plain | #8-32 | 8-32 self locking nutplate w/dry film lube. | 105 |
| |
| GLF | OH | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50 x 40 | m10-1.5 x 40 hhcs cl 10.9 stl zc din 933 | 149 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 2 3/4 | 5/8-11 x 2-3/4 f/t stud b-7 stl pln | 84 |
|
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3 | 1/4-20 x 3 shcs 18-8 s/s | 791 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | Grade 8 | Plain | 1-1/8-12 x 5 5/16 | 1-1/8-12 x 5-5/16 d/p stud 1.010/1.000 x 1/2 gr 8 stl pln | 81 |
|
| GLF | OH | 12 Point Flange Screw (CounterBore) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 12-pt flange bolt 17-4 ph s/s | 306 |
|
| NAPPCO | TX | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 1/4 | soc set sc s/s 18-8 5/16-18x1-1/4 cup pt | 900 |
|
| NAPPCO | TX | Drop-In Style Anchor | Plain | 5/8-11 | 5/8-11 drop in anchor | 23 |
| |
| Brikksen | FL | Machine Screw | Plain | #10-32 x 2 1/2 | 10-32 x 2-1/2 phillips pan head machine | 4800 |
| |
| Brikksen | FL | Coupling Nut | Plain | #8-32 x 3/8 x 1/2 | 8-32 x 1/2 hex coupling nut asme | 2500 |
| |
| Brikksen | FL | Button Head Socket Cap Screw | Steel | Plain | M8-1.25 x 40 | m8-1.25 x 40 button head hex socket cap | 3270 |
|
| Hayes | CA | Set Screw (Socket Head) | Steel | Plain | 1/4-28 x 1/4 | 1/4-28 x 1/4 soc set oval pt patch alloy | 1074 |
|
| UNEEDA | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Plain | 1/4 | 1/4 ips internal l/w steel | 19100 |
|
| NutsBolts | NE | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 7/8-9 x 5 1/2 | 7/8-9x5 1/2 a325 hvy hex bolt hdg | 9 |
|
| NutsBolts | NE | Hex Machine Bolt | Grade A | Galvanized | 5/8-11 x 7 1/2 | 5/8-11x7 1/2 a307 hex bolt hdg | 17 |
|
| NutsBolts | NE | Straight Anchor Bolt | Steel | Galvanized | ab350 absorb anchor bolt hdg | 800 |
| |
| NutsBolts | NE | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10 x 2 | 10x2 6-lobe pan thread rolling screw equal zp | 22914 |
|
| Bossard | AZ | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | standoff stainless penn engineering | 76277 |
| |
| Bossard | AZ | Button Head Socket Cap Screw | Steel | Plain | screw button head cap | 120 |
| |
| Bossard | AZ | blind insert stainless penn engineering | 3 |
| ||||
| Bossard | AZ | Dowel Pin | Steel | Plain | dowel pin m6 tolerance iso 2338a | 190 |
| |
| Centennia | CO | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 hex c/s gr8 nc dom zn&y | 10 |
|
| Centennia | CO | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-16 x 1 | 3/4-16 x 1 hex c/s gr8 nf dom zn&y | 29 |
|
| CIF | IL | Direct Tension Indicating (DTI) Washer | Steel | Zinc/Clear | 5/8 x 4.000 | 5/8 x 4.000 upin 1045 steel 77 min yield 91 min tensile zinc plate astm b633 type iii class 1 | 2550 |
|
| Hodell | OH | Track Bolt | 316, 317, A4 Stainless | Plain | 1 1/8-7 x 6 | 1 1/8-7x6 oval neck track bolt 316 ssstainless | 13 |
|
| SWACO | OH | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/4 | 3/8-16x3/4 cd stud w/flg 18-8 st-st | 5 |
|
| SWACO | OH | Lock Bolt with Collar (HuckBolt etc.) | Titanium | Plain | hi-lok bolt titanium hex drive bacb30nx8k6 | 50 |
| |
| SWACO | OH | Thread Repair Kit | Plain | 10193-20 heli-coil tap | 4 |
| ||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1191-9cn844 heli-coil insert | 1830 |
| ||
| SWACO | OH | Flat Head Socket Cap Screw | Steel | Plain | #10-32 x 1 3/4 | #10-32x1 3/4 non-standard flt sock | 200 |
|
| SWACO | OH | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | M4-0.70 | m4-0.70 serr hx flange l/n stl zi | 7612 |
|
| SWACO | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/2 | 3/4-10x2-1/2 hhcs 18-8ss | 40 |
|
| SWACO | OH | U-Bolt | Steel | Zinc/Clear | 3/8-16 x 2 x 2 5/8 | 3/8-16x2 x 2 5/8 u-bolt 1 1/2 pipe zinc | 121 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | tlc-04c-0112 kato ss tanged insert locking | 3100 |
| |
| SWACO | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M18 | m18 stover l/n cl-10 zinc | 55 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 13 | 3/4-10x13 hhcs gr8 pln | 20 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | r1084-9 heli-coil pkg insert (12 pk) | 3 |
| ||
| Accutite | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Nickel Plated | 8 x 5/8 | 8 x 5/8 phillips truss ab sms steel nickel note pltng critical no yellow/flaking | 25000 |
|
| Accutite | CA | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Grade 5 | Black Oxide | 1/4-20 x 1 | 1/4-20x1 hex serrated flange bolt gr 5 blk ox w/nylon patch and light wax 11-014 | 164121 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 125154 anvil 06-nail | 7 |
| ||
| BoltCraft | NE | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 | 3/8-16 x 2 iw x 4 il x 2 thread square bend u-bolt 304 stainless | 113 |
|
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 30 | M10-1.5x30 socket cap screw s/s | 503 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 3/4-10 x 3 | 3/4-10 x 3 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| NBS | CA | Dowel Pin | Steel | Plain | M3 x 26 | M3x26 dowel pin-alloy-bright finish (taiwan) [m6 spec] din 6325 | 25000 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | Class 12.9 | Plain | M8-1.25 x 70 | m8-1.25 x 70mm cl.12.9 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Field Fas | IL | Slotted Spring Pin (Roll Pin) | Plain | spring-spin | 23 |
| ||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | .875 | huck lockbolt pin (mgpb-e12-14) ( .188 / .875 ) | 1800 |
| |
| Field Fas | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 1/4 x 7/8 | hex wash teks/3 zp 1/4x7/8 | 20 |
|
| Field Fas | IL | Eye Bolt | Steel | Plain | 7/8-9 x 6 1/2 | 7/8-9 x 6-1/2 oal eyebolt/w 15/16 dia | 150 |
|
| Field Fas | IL | External Type C Retaining Ring (C-Clip) | Steel | Plain | 3/4 x 3 | 1 3/4 x 3 grip ring 1/4 dia stl pln | 750 |
|
| OneMonroe | MN | Tubing | 4 x 4 | end pad 4x4 for large tube | 2 |
| ||
| OneMonroe | MN | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 7 1/4 | 5/8-11 x 7.25 stud 18-8 ss per print | 2 |
|
| OneMonroe | MN | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Black Oxide | 1/4-20 | 1/4-20 kep nut stl blk ox | 343 |
|
| OneMonroe | MN | Carriage Bolt | Grade 2 | Zinc/Clear | 5/16-18 x 4 1/2 | 5/16-18 x 4-1/2 gr.2 carr bolt-zp | 39 |
|
| OneMonroe | MN | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-1.50 x 80 | m14 x 1.50 x 80 8.8 hhc/s-zp | 25 |
|
| OneMonroe | MN | Fender Washer | 316, 317, A4 Stainless | Plain | 1/4 x 1 | 1/4 x 1 fender washers 316 ss | 4 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 5/16-24 x 1 | 5/16-24 x 1 low head socket cap screw | 13 |
|
| OneMonroe | MN | Coiled Pin (Spiral Spring Pin) | ms16562-224 | 12 |
| |||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/2 | 2-56 x 1/2 slottedbinder m/s 18-8ss | 3362 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 1-1/4 | 1-1/4s gl wir b/brg kbz-s | 36 |
| |
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 7/16-14 x 3 1/2 | 7/16-14 x 3 1/2 socket cap screw | 200 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 9/16-12 x 4 1/2 | 9/16-12 x 4 1/2 sae j429 gr 8 hx c/s pkg zinc-yell pkg qty 25 carton 97 | 64 |
|
| OneMonroe | MN | Flat Washer | Steel | Zinc/Clear | 3/8 | 3/8 dome tooth periphery washer stl & zinc | 16200 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/8 | 6-32 x 3/8 torx but soc c/s efi 18-8ss bkps | 2000 |
|
| OneMonroe | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | M8 | riv-nut 90 degree csk m8 thread | 1025 |
| |
| OneMonroe | MN | Lock Nut, Nylon Insert | Steel | Zinc/Yellow | 3/4 | 3/4 nyl ins ln zy | 100 |
|
| OneMonroe | MN | Beveled Washer (Round & Square) | Steel | Zinc/Clear | 3/4 | 3/4 mi bevel washer zp | 4 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 7/8 x 2 3/4 | 7/8 x 2 3/4 gr8 hhc | 28 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 1 3/4-5 x 4 | 1 3/4-5 x 4 sae j429 gr.8 hhc plain | 3 |
|
| OneMonroe | MN | Self-Clinching Standoff | Plain | #10-32 x .625 | bso-032-20zi standoff blind st #10-32 x .625 | 5141 |
| |
| Alma Bolt | MI | Clevis Pin | Plain | 1/4 x 3 | 1/4 x 3 clevis pin | 972 |
| |
| Alma Bolt | MI | Pipe Nipple | 1 x 4 | 1 x 4 nipple s80 pipe products | 18 |
| ||
| Alma Bolt | MI | Hex Head Cap Screw | Class 10.9 | Phosphate | M12-1.25 x 60 | m12 x 1.25 x 60 phos & oil xf hex cap screw 10.9 | 7509 |
|
| Alma Bolt | MI | Pipes | Teflon (PTFE) | Plain | 8 | #76003 8 oz w/brush top ptfe blue monster pipe thread sealt | 21 |
|
| Alma Bolt | MI | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Rubber, Buna-N, Neoprene etc. | Plain | #10-32 | #17586 10-32 well nut au-ve-co part | 142 |
|
| Alma Bolt | MI | Threaded Rod (Acme Thread) | Plain | 3/8-12 | 3/8-12 left hand acme full thread rod | 60 |
| |
| Alma Bolt | MI | Heavy Hex Nut | Grade 2H | Galvanized | 2 1/4-4 1/2 | 2 1/4-4 1/2 uss hdg 2h heavy hex nut | 9 |
|
| Optimas | IL | SAE Flat Washer | Steel | Plain | 3/8 | 3/8 sae washer thru-hard steel plain pack of 50 | 4324 |
|
| Optimas | IL | magid import 100% polyester mesh safety vest with silver reflective tape meets ansi 107-2015 class 3 inside pockets zipper front yellow sz l/xl | 2 |
| ||||
| Optimas | IL | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5 | m2.5 screw size round spacer a2 ss 2.7mm x 4.5mm x 5mm rohs | 303 |
|
| Hybroco S | MI | Arc Weld Stud | Plain | 5/8-11 x 2 1/8 | 5/8-11 x 2-1/8 ms pd arc stud | 550 |
| |
| Delta | TX | 12 Point Flange Screw (CounterBore) | Steel | Plain | 3/4-10 x 2 1/4 | 12 pt countr-bor 3/4-10x2 1/4 | 196 |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | sheet metal speed nut tinnerman nut (f/j/u) steel phosphate .593 knob-to-shaft fastener | inquire |
| |
| IndexFast | CA | Fully Threaded Stud (All Thread) | Steel | Black Oxide | snap fasteners (snap studs snap caps etc.) steel black oxide k55-0000-cu4 _x000d_sp 30 polyacetal/glossy black socket | 6980 |
| |
| AFT Faste | TX | Metal Drill Bits | 11/32 | 11/32 pilot point drill bit | 48 |
| ||
| AFT Faste | TX | Machine Taps | Steel | #3 x 56 | #3x56 hi acrbon steel tap type 761-bottoming | 14 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | hex head cap screw grade 5 zinc/yellow | 159 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex machine bolt class 8.8 plain | 1 |
| |
| Coburn Myers Fastening Systems | PA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | flat washer 18-8 stainless plain | 284 |
| |
| AIH | AZ | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 | 5/16-24 bolt dbl hex head ext washer hd s/s | 51 |
|
| AIH | AZ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 5/8 | 3/8-16x5/8 hex cap screw s/s | 7 |
|
| AIH | AZ | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/8 x 1/2 | 1/8x1/2 dowel pin 416ss | 1301 |
|
| AIH | AZ | Ball Bearings, Balls, Bearing Mounts | washer key retaining ball roller bearing | 1 |
| |||
| AIH | AZ | External Type SH Retaining Ring | Steel | Phosphate | external retaining ring carbon steel phosphate | 61 |
| |
| AIH | AZ | O-Rings & Quad Ring Seals (X-Rings) | O-Ring NAS1611-276A | 42 |
| |||
| AIH | AZ | Slotted Spring Pin (Roll Pin) | Steel | Plain | 1/16 x 3/8 | pin MS171434 | 3652 |
|
| Hewes | NY | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M6-1.00 x 60 | M6x1.0 x60 hex hd cap screw a4 s/s din 933 | 146 |
|
| Hewes | NY | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/4 | 6-32x 1-1/4 slot flat m/s | 3157 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #0-80 x 1/4 | 0-80 x 1/4 socket set flat point 18-8 stainless | 100 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 5 1/4 | 10-32 x 5-1/4 socket cap 18-8 stainless | 3 |
|
| FasSpcMfg | FL | Sockets | #5-40 x 1/2 | 5-40 x 1/2 socket set knurled point alloy | 363 |
| ||
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 3/8-24 x 3/4 | 3/8-24 x 3/4 socket cap 2a fit alloy | 17 |
|
| OneMonroe | MA | Cap Nut (Acorn Nut) | Steel | Black Oxide | 3/8-16 x 1 1/2 | non-swivel 3/8-16 x 1-1/2 w/hex nut at stem base w/black finish 2-1/8 dia black base cap and black poly base | 72 |
|
| OneMonroe | MA | High Collar Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 | m5 high collar lock washer a-2 stainless steel din 7980 | 2200 |
|
| OneMonroe | MA | Lag Screw | Steel | Galvanized | 5/8 x 4 1/2 | 5/8 x 4-1/2 hex head lag screw galvanized | 200 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #4-40 | nut hex machine screw 4-40 steel/zinc | 8986 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | M4-.7-0.70 x 25 | m4-.7 x 25 phillips truss m/s zinc | 2500 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 8 | 3/8-16 x 8 hex cap screw gr 2 zinc | 51 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #8-32 x 3/8 | brass slotted flat head ms #8-32 x 3/8 | 460 |
|
| Raw Produ | NJ | Flat Washer | Silicon Bronze | Plain | 3/8 | flat washers silicon bronze 3/8 l | 147 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16 x 80 | metric hex tap bolts a2 ss m16 x 80m | 16 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 45 | metric phillips flat head ms a2 ss m6 x 45m | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 1/2-13 x 8 1/2 | hex cap screws hdg 1/2-13 x 8-1/2 pt | 93 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/8 | slotted pan head ms 304 ss #4-40 x 3/8 | 500 |
|
| Raw Produ | NJ | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 5/8-11 x 5 | wedge anchor 316 ss 5/8-11 x 5 | 56 |
|
| Raw Produ | NJ | Metal Drill Bits | Steel | Zinc/Clear | #10 x 1 | pro-z zp cap mini-driller point-brown-#10 x 1 | 500 |
|
| Raw Produ | NJ | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1 1/4 | hex lag screws 304 ss 1/4 x 1-1/4 | 2881 |
|
| Raw Produ | NJ | Flat Washer | Silicon Bronze | Plain | 3/4 | flat washers silicon bronze 3/4 | 90 |
|
| Fastenerc | OH | Machine Screw | Steel | Zinc/Clear | #4-40 x 1/8 | 4-40 x 1/8 steel flat phill mach screw zinc | 3950 |
|
| Mil-Spec | MD | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1/2 | 8-32 x 1/2 socket cap screw 316 stainless steel | 45 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #0-0 | cls-0420-0 pem self-clinching nut #302/303 sst | 5000 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | fex-0420 ref-m45938/7-10ppem miniature nut | 287 |
| ||
| AEROSPCE | MN | Semi-Tubular Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 35 | ms16535-447 rivet | 1000 |
|
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain | tp144-088 pop rivet washer tp144-088 | 1 |
| |
| F. Solutions | OH | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | heavy hex structural bolt 1-1/4-7 x 5-1/2 a325 hdg | 3 |
| ||
| F. Solutions | OH | Ear Plugs & Hearing Protection | uncorded nr33 foam bell-style earplugs 200/box | 1 |
| |||
| F. Solutions | OH | Machine Screw | Steel | Zinc/Clear | indented hex head machine screw unslotted 10-32 x 1/4 steel zinc | 100 |
| |
| F. Solutions | OH | Tapered Pin | Steel | Plain | #9 x 4 | taper pin #9x4 carbon steel | 12 |
|
| National | Ont | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-19 x 3/8 | 6-19x3/8 hex washer hi-lo sz | 1710 |
|
| National | Ont | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 5/16-24 | 5/16-24 nyl ins locknut sz | 15528 |
|
| Mansco | MI | Electrical Lugs & Terminals | Plastic | Plain | 16 | 16 ga 1/4 blue vinyl ring terminal 100/box | 175 |
|
| Mansco | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-24 x 3/8 | 4-24 x 3/8 pan phil ty-ab 18-8 s.s. | 2011 |
|
| AFI | FL | Round Spacer | Nylon (Polyamide) | Plain | #4 | nylon spacer #4 screw () | 619 |
|
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 5 | m3x5 phil flat ms ss din 965a () | 585 |
|
| AFI | FL | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 | m2 int tooth lock washer ss din 6797j () | 600 |
|
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 15305 |
| |
| AFI | FL | Cable Clamps & Ties | cable tie mnt adh 1.1 x1.1 wht () | 16000 |
| |||
| AFI | FL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 7/16 x 1/16 x 9/16 | 7/16x1/16x9/16 o-ring buna-n-70 () | 1000 |
|
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 8412 |
| |
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | 10-32x3/4 phil truss ms ss () () | 986 |
|
| AFI | FL | Push-on Nut (Pushnut, Starlock Washer, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | retainer push-on ss southco 85-34-201-20 | 10 |
| |
| Mansco | MI | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | m4-0.7 hex nylon insert locknut cl8 triv znc 20/bag | 72 |
| |
| Buckeye | OH | Flat Washer | Steel | Zinc/Clear | 5/16 x 7/8 flat washer zinc plated | 2800 |
| |
| F. Solutions | OH | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 1/2 | phillips pan machine screw 6-32x1-1/2 zinc plated | 12722 |
|
| F. Solutions | OH | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/2-13 x 1 1/4 | hex flange bolt non-serrated 1/2-13x1-1/4 grade 8 magni 575 black usa | 6740 |
|
| IRF | NC | Semi-Tubular Rivet | Aluminum | Plain | 1/4 x 2 | 1/4x2 ohtr (.437 hd) alu/pln | 2,903 |
|
| Accurate | IN | Fender Washer | Steel | Zinc/Clear | 1/2 | 1/2 fender steel zinc usa .531x1.25x.047-.080 | 3000 |
|
| General F | MI | Self-Tapping Thread Rolling Screw | Steel | Plain | M12-1.75 x 40 | M12-1.75x40 hex flange thread rolling screw 2000 | 10750 |
|
| Arden | WI | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Yellow | #4 | #4 internal lock washer zy | inquire |
|
| Arden | WI | Socket Head Cap Screw | Steel | Zinc/Clear | #4-40 x 1/2 | 440x1/2 hxsoc cs w/pat zc | inquire |
|
| THRDFAST | AL | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 1 3/8-8 x 10 1/2 | a193 b7 a/t stud b18.2.1 b18.31.2 | 11 |
|
| THRDFAST | AL | Hex Head Cap Screw | Grade 8 | Plain | 5/16-18 x 2 1/2 | gr8 hex c/s b18.2.1 | 2 |
|
| THRDFAST | MS | Set Screw (Square Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 4 | 18-8 ss square set cup pt b18.6.2 | 11 |
|
| THRDFAST | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 5/8-11 x 2 | a325 type-1 str/b w/nut b18.2.1 b18.2.6 | 4 |
|
| THRDFAST | AL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #8 x 1/2 | t-316 ss phil pan t/s b18.6.4 | 150 |
|
| BRIGHBEST | IL | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 1/4-20 x 2 1/4 | 1/4-20x2 1/4 pfc9 hex cap screw - usa zinc yellow | 27300 |
|
| Lightning | LA | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.50 x 20 | hex c/s fine thread wrench size=19 fine thread | 25 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/4-7 x 4 3/4 | astm a193 b7 heavy h/b teflon blue 7 unc | 483 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 1/2-8 x 15 | astm a193 gr. b16 all thread stud | 444 |
|
| Lightning | LA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 16 | socket capscrew a-4-ss | 640 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/2-6 x 12 | ft astm a193 b7 all thread rod teflon blue | 326 |
|
| Lightning | LA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 7/8-9 x 2 1/2 | a325 heavy h/b plain | 234 |
|
| Lightning | LA | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 2 7/16 | internal type retaining ring black phosphate SAE 1065-1090 spring | 25 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 7/8-9 x 4 3/4 | astm a193 b7 all thread stud teflon blue | 1254 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M3-0.50 x 80 | socket c/s | 464 |
|
| Lightning | LA | Hex Machine Bolt | Grade A | Plain | 5/16-18 x 3 | astm a307a h/b finish | 400 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/4-8 x 7 | astm a193 b7 all thread stud | 388 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
