FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Finished Hex Nut | Steel | Zinc/Clear | M5-0.8-0.80 | zinc plated steel hex nut low-strength m5x0.8 thread size 8mm wide 4mm ht packs of 100 | 100 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 4 x 3 wheel mat steel finish zinc top plate sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 5 x 3 wheel mat steel finish zinc top plate sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 6 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers swivel lock accepts wheel sz 5 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | 18-8 stainless steel hex nut m6 size 1mm pitch 10mm width 5mm height coo | 500 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75-1.75 | 18-8 stainless steel hex nut m12 x 1.75 mm thread (pack of 25) | 50 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 | 18-8 stainless steel hex nut 4-40 thread size (pack of 100) | 400 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers and swivel lock accepts wheel sz 10 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 2 |
|
| OneMonroe | NC | High Hex Nut | 316, 317, A4 Stainless | Plain | M12-1.75-1.75 | super-corrosion-resistant 316 stainless steel thin hex nut m12 x 1.75 mm thread 6 mm high (pack of 10) | 350 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain | #10-32 | round weld nut 10-32 | 1807 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1-12 | 1-12 zinc finish grade c top lock nut | 18 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Class 10.9 | Zinc/Clear | M16-1.50-1.50 | m16-1.50 class 10 nylock nut zinc | 25 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 2-8 | 2-8 plain finish steel top lock nut | 100 |
|
| OneMonroe | NC | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 steel cage nut .064-.105 panel range zinc plated | 250 |
|
| OneMonroe | NC | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Class 8.8 | Black Oxide | M10-1.5-1.50 | m10-1.5 steel class 8 serrated flange nut-blackoxide | 1184 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Nickel Plated | #10-24 | #10-24 capped washer type lock nut steel/nickel w sealer | 12000 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M10-1.25-1.25 | m10-1.25 top lock nut zinc class 10 | 87 |
|
| OneMonroe | NC | Flange Nut, Non-locking | Class 10.9 | Zinc/Yellow | M10-1.5-1.50 | m10-1.5 steel class 10 yz non-serrated flange nut din 6923 | 50 |
|
| OneMonroe | NC | Flange Nut, Non-locking | Class 10.9 | Zinc/Yellow | M12-1.75-1.75 | m12-1.75 steel class 10 yz non-serrated flange nut din 6923 | 25 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 | 5/8-11 fin hx nut w/buna ring s.s. | 75 |
|
| Jackson | MS | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-20 | 1/2-20 nf jam nut stainless steel | 100 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 15 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 6 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 15 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 2 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 7 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 4 | 4-slot locknut | 29 |
|
| OneMonroe | NC | Push-on Hat Retainer, Axle Cap Nut, Top Hat Nut | Steel | Plain | /1/4 x 1.5 | axle/nut1/4 in dia1.5 in lgth | 31 |
|
| OneMonroe | NC | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8-24 hx jam nut-s.s. | 100 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 5 | Zinc/Clear | 1 1/4-12 | 1-1/4-12 gr.5 fin hx nut-nf-zp | 12 |
|
| OneMonroe | NC | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 5/16 barl4p prng t-nut-zp | 5300 |
|
| OneMonroe | NC | T-Nut (Tee Nut) | Steel | Zinc/Clear | 5/16-18 x 3/8 | 5/16-18 x 3/8 barl4p prng t-nut-zp | 2918 |
|
| OneMonroe | NC | Finished Hex Nut | Nylon (Polyamide) | Plain | #8 | auvecopak auveco pak nylon nuts #8 screw size | 1 |
|
| OneMonroe | NC | Heavy Hex Nut | Steel | Plain | M8 | auvecopak thread cutting nuts 8mm stud size | 1 |
|
| OneMonroe | NC | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | #10 | auvecopak spring type-u nuts #10 screw size | 1 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain | 1/4-20 | 1/4-20 finished hex nut-plain | 3890 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain | 7/8-9 | 7/8-9 finished hx nut-pln | 297 |
|
| OneMonroe | NC | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | 1/2-13 | 1/2-13 keps nut-zp | 1000 |
|
| OneMonroe | NC | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Plain | keps nut | 90 |
| |
| OneMonroe | NC | Lock Nut, Flange, w/o serrations | Grade G | Phosphate | 3/8-16 | 3/8-16 gr.g flange l/n-phos & oil | 44 |
|
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | #10-24 | 10-24 hx cap nut-zp | 32 |
|
| Jackson | MS | Machine Screw Nut | Brass | Plain | #3-48 | 3-48 nc machine screw nut brass | 908 |
|
| OneMonroe | MN | T-Nut (Tee Nut) | Steel | Zinc/Clear | 3/8-16 x 7/16 | 3/8-16x7/16 tee nut 4 prong zinc | 1995 |
|
| OneMonroe | MN | Finished Hex Nut | Nylon (Polyamide) | Plain | 1/4-20 | 1/4-20 hex nut nylon natural | 2600 |
|
| TownCountry | AR | Acme Thread Nut | Plain | 1-6 | 1-6 hex nut acme plain | 20 |
| |
| OneMonroe | MN | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-11 | 5/8-11 2-way rev. l/n gr. 8-zinc flake | 489 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 7/16-14 | 7/16-14 nc jam pattern flex lock nut zinc .316 tall x .625 waf | 28 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M22-1.50 | m22-1.5 nylon lock nut cl 8-zp | 300 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
