FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Gaskets | M14 | 14mm drain plug gasket | 36 |
| |||
| Shadran I | Cable Clamps & Ties | 2 | 2 insulated cable clamp | inquire |
| |||
| Jackson | MS | Hex Jam Nut | Grade 8 | Plain / Furnace Black | 2-12 | nf jam nut | 5 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M14-2.00 x 80 | h/b a-2 18-8 304 f/t | 15 |
|
| Jackson | MS | Machine Screw | Brass | Plain / Furnace Black | #6-32 x 1 | round slotted m/s | 1523 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 3/8 | round slotted m/s 18-8 304 | 1047 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | #10-32 x 3 | nf socket hd cap | 555 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Plain / Furnace Black | 1/4 x 1 3/4 | nc socket set cup point | 197 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 1/4 x 1/2 | nc serrated truss slotted m/s | 100 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M16-2.00 x 200 | hex c/s partially threaded | 14 |
|
| OneMonroe | NC | Drywall Screw | Steel | Zinc/Yellow | #10-8 x 6 | #10-8 x 6 phillips bugle head coarse drywall screw yellow zinc | 500 |
|
| OneMonroe | NC | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 1/2 x 5/8 (3/8-16) | 1/2 x 5/8 soc shoulder screw efi stl | 98 |
|
| OneMonroe | NC | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 1/2 x 3/4 (3/8-16) | 1/2 x 3/4 shoulder bolt | 74 |
|
| Jackson | MS | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 3/8 x 2 3/4 | extended prong chisel pt. | 153 |
|
| Jackson | MS | 2/0 x 3/8 battery end krimp lead | 23 |
| ||||
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/4-10 x 3 1/4 | nc socket hd cap | 101 |
|
| Jackson | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 7/8 | fl phillips t/s 18-8 304 | 702 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 2 | nc phil truss m/s 18-8 304 | 291 |
|
| Jackson | MS | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M4-0.70 | M4-x.70 recoil kit #35040 or equal | 1 |
| ||
| Jackson | MS | Screwdriving Insert Bits & Power Bits | 6 1 | 6 in 1 bit screw driver | 5 |
| ||
| Jackson | MS | Key Stock | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/16 x 12 | key stock square 18-8 304 | 30 |
|
| Jackson | MS | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M20-2.50 | coarse nylock nut a-2 18-8 304 | 53 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | 1/4-20 x 6 | 1/4-20 x 6 plain finish low carbon fully threaded stud | 440 |
|
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | Steel | Zinc/Clear | 1/2 | 1/2 riser type pipe clamp zinc pltd | 50 |
|
| OneMonroe | NC | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | 1/2-13 | nut 1/2-13 k lock nut zinc and bake 1000/ctn | 500 |
|
| OneMonroe | NC | Split Lock Washer | Grade 8 | Zinc/Clear | 1/2 | 1/2 regular split l/w gr8 zncyl | 2177 |
|
| OneMonroe | NC | Pipe Hanger, Extension Ring Hanger | Steel | Zinc/Clear | 1/2 | 1/2 clevis type pipe hanger zinc pltd | 65 |
|
| Jackson | MS | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | #6 | eff. range 5/16-7/8 hose clamp 18-8 304-screw | 10 |
|
| Jackson | MS | Ogee Washer | Iron | Galvanized | 1 | 1 ogee h.d.g. class 30 grey iron .906hx1.125idx4 od | 24 |
|
| Jackson | MS | External Type SH Retaining Ring | Steel | Plain / Furnace Black | 2 7/16 | internal snap ring finish | 45 |
|
| Jackson | MS | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 5/16 x 1 | roll pin 420 s/s | 151 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Zinc/Clear | 1/4 x 1/2 | nc b-7 hex c/s w/ nylon pellet | 58 |
|
| OneMonroe | NC | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10-12 x 3 | #10-12 x 3 phillips/square combo flat head sheet metal screw gimlet pt zinc | 1000 |
|
| OneMonroe | NC | Split Lock Washer | Phosphor Bronze | Plain / Furnace Black | 1/2 | 1/2 regular split l/w phos brz | 2100 |
|
| OneMonroe | NC | Split Lock Washer | Steel | Plain / Furnace Black | 1/2 | 1/2 regular split l/w stl | 739 |
|
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | 1/2 regular split l/w 18-8ss bkps | 645 |
|
| OneMonroe | NC | Flared Fittings | Brass | 1/2 x 1/8 | 1/2 x 1/8 flare half union brass | 5 |
| |
| Jackson | MS | Machine Screw | Steel | Plain / Furnace Black | M6-1.00 x 16 | pan phil | 2641 |
|
| Jackson | MS | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | M24-3.00 | 2h nut din 6915 | 15 |
|
| Jackson | MS | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #14 x 1 1/2 | #14x1 1/2 hex tek 410 ss | 800 |
|
| Jackson | MS | Masonry & Concrete Drill Bits | 1 x 18 | oal 16 useable sds-plus masonry hammer drill bit 160 pt | 3 |
| ||
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 1/2-13 x 5 | b7 stud and | 26 |
|
| Jackson | MS | Slotted Spring Pin (Roll Pin) | Steel | Plain / Furnace Black | 3/32 x 1/4 | roll pin 1074 carbon finish | 2181 |
|
| Jackson | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 x 1 1/2 | nc skt set cup point 18-8 304 | 104 |
|
| Jackson | MS | Thumb Screw (Plain) | Steel | Zinc/Clear | #10-24 x 1/2 | nc thumb type p | 362 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | #10-32 | 10-32 nf flex lock nut | 47 |
|
| OneMonroe | NC | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/4-20 x 1 1/2 | 1/4-20 x 1-1/2 unslotted hwh tek #4 point structural self drilling screw climaseal | 1125 |
|
| OneMonroe | NC | Finished Hex Nut | Brass | Plain / Furnace Black | 9/16 x 3/32 | 1/2-28 specl hex nut 9/16 x 3/32 brs ni pl | 1136 |
|
| Jackson | MS | Machine Screw | Brass | Plain / Furnace Black | #10-24 x 2 | round slotted m/s | 101 |
|
| Jackson | MS | Countersink Cutters | Steel | Plain / Furnace Black | flute 82 degree chatterless countersink hs m-2 #39e132b | 7 |
| |
| Jackson | MS | Finished Hex Nut | Class 10.9 | Zinc/Clear | M18-1.50 | fine nut | 43 |
|
| Jackson | MS | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 1 1/2 | nc c/b 18-8 s/s | 1400 |
|
| OneMonroe | NC | Hex Machine Bolt | Grade A | Zinc/Clear | 7/16-14 x 2 1/2 | 7/16-14 x 2-1/2 zinc finish astm a307a hex bolt | 400 |
|
| Jackson | MS | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | 5/16-24 x 5/8 | nf flat socket c/s | 547 |
|
| Jackson | MS | Wood Screw | Brass | Plain / Furnace Black | #12 x 2 | fl phillips w/s | 291 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 1/4 | round slotted m/s 18-8 304 | 1745 |
|
| Jackson | MS | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16 x 1 1/4 | nc c/b 18-8 s/s | 18 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 1 1/4-7 x 6 | nc socket hd cap | 18 |
|
| Jackson | MS | Tapered Pin | Steel | Plain / Furnace Black | 2 x 1 | taper pin .193 diameter on large end | 209 |
|
| Jackson | MS | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 5/8-11 x 3 | nc hex c/s 316 ss | 83 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 | 1/2-13 nc flex lock nut .588 tallx.750 waf | 12 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/8-24 x 2 1/4 | nf socket hd cap | 128 |
|
| OneMonroe | NC | Hex Machine Bolt | Grade A | Zinc/Clear | 1/2-13 x 2 3/4 | 1/2-13 x 2-3/4 zinc finish astm a307a hex bolt | 161 |
|
| OneMonroe | NC | Fender Washer | Steel | Plain / Furnace Black | 1/2 x 1 1/2 | 1/2 x 1 1/2 fender washer | 1600 |
|
| OneMonroe | NC | Dowel Pin | Steel | Plain / Furnace Black | 1/2 x 1 3/4 | 1/2 x 1 3/4 dowel pin | 1 |
|
| OneMonroe | NC | Clevis Pin | Steel | Plain / Furnace Black | 1/2 x 2 | 1/2 x 2 clevis pin | 7 |
|
| OneMonroe | NC | Flared Fittings | Brass | 1/2 x 1/4 | 1/2 x 1/4 flare half union brass | 4 |
| |
| Jackson | MS | Machine Screw | Nylon (Polyamide) | Plain / Furnace Black | 1/4 x 3/4 | flat slotted m/s | 2760 |
|
| Jackson | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8 x 3/4 | pan phillips t/s 18-8 304 | 177 |
|
| Jackson | MS | Hex Head Cap Screw | Aluminum | Plain / Furnace Black | 5/8-11 x 2 | hex c/s | 25 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 3/8 x 1 1/4 | nc l-9 hex c/s | 61 |
|
| Jackson | MS | Countersunk Finishing Washer | Steel | Plain / Furnace Black | 3 9/16 x 5 x 1/4 | 3 9/16 idx5 odx1/4 thick special finish | 1 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Zinc/Clear | 1 1/8-8 | tpix7 1/2 b-7 hex c/s | 4 |
|
| Jackson | MS | Elevator Bolt | Steel | Zinc/Clear | 5/16 x 2 | e/b | 245 |
|
| Jackson | MS | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1/2 x 8 | nc sq. set full dog pt | 12 |
|
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Plain / Furnace Black | 3/8 | 3/8in hex head thread cutter | 264 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 1 1/8-7 x 10 | 1 1/8-7 x 10 sae j429 gr 8 hx c/s | 12 |
|
| OneMonroe | NC | Flared Fittings | Brass | 1/2 x 1/4 | 1/2 x 1/4 forged flare male 90 brass | 3 |
| |
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Brass | 1/2 x 1/4 | 1/2 x 1/4 female flare coupling brass | 4 |
| |
| Jackson | MS | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1/2 | nc socket set 316 ss | 300 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | #10-24 | 10-24 nc flex lock nut | 149 |
|
| Jackson | MS | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1 x 3 | nc square set | 56 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 7/8-9 x 5 | nc socket hd cap | 25 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 5/8-18 x 1 | nf l-9 hex c/s | 28 |
|
| Jackson | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 x 1 | nc skt set cup point 18-8 304 | 88 |
|
| Jackson | MS | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 5/32 x 1 1/4 | roll pin 420 s/s | 482 |
|
| Jackson | MS | Drop-In Style Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 | drop in anchor 18-8 304 | 54 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1/2 | under cut fl phillips m/s 18-8 304 | 682 |
|
| Jackson | MS | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 | nc wing nut 18-8 304 | 285 |
|
| Jackson | MS | Eye Bolt | Steel | Galvanized | 5/8-11 x 4 | forged eye bolt | 33 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/8-7 x 3 | 1 1/8-7 x 3 hex cap screw gr 5 plated | 3 |
|
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Brass | 1/2 x 1/4 | 1/2 x 1/4 compression male connector brass | 10 |
| |
| OneMonroe | NC | Pipe Nipple | Steel | Galvanized | 1/2 x 3 | 1/2 x 3 welded steel nipple galv. | 15 |
|
| OneMonroe | NC | Barbed Fittings | Brass | 1/2 x 1/4 | 1/2 x 1/4 push-on hose barb x male pipe brass | 3 |
| |
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Brass | 1/2 x 1/4 | 1/2 x 1/4 compression female connector brass | 10 |
| |
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 30 | socket cap a-2 ss | 243 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 1/4 x 1 1/2 | nc flat slotted m/s | 966 |
|
| Jackson | MS | Tapered Pin | Steel | Plain / Furnace Black | 3 x 1 1/2 | taper pin .219 diameter on large end | 166 |
|
| Jackson | MS | Heat Shrink Tubing | .75 black 8-1 6 length heat shrink tubing hvy flame retard | 21 |
| |||
| Jackson | MS | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 3/8 x 3/8 (5/16-18) | socket stripper bolt | 10 |
|
| Jackson | MS | 12 Point Flange Screw (CounterBore) | Steel | Plain / Furnace Black | 5/8 x 4 | nc ferry c/s | 15 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | M10-1.50 x 45 | socket set blue teflon coated cup point din 916 | 86 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | 1 x 6 | nc b-7 hex c/s | 7 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 3/8 x 2 1/2 | nc round slotted m/s | 687 |
|
| Jackson | MS | Finished Hex Nut | Grade 5 | Plain / Furnace Black | 1 1/8-7 | nc l.h. nut gr. 5 | 127 |
|
| Jackson | MS | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1/2 x 6 | nc sq. set half dog pt | 31 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | #10-32 x 2 | nf socket hd cap | 1096 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Zinc/Clear | 1 1/8-12 | 1 1/8-12 hex finish nut plated | 206 |
|
| OneMonroe | NC | Fender Washer | Steel | Zinc/Clear | 1/2 x 3 | 1/2 x 3 fender washer plated | 2 |
|
| OneMonroe | NC | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 1/2 x 3 | 1/2 x 3 cotter pin zinc pltd | 25 |
|
| OneMonroe | NC | Dowel Pin | Steel | Plain / Furnace Black | 1/2 x 3 | 1/2 x 3 dowel pin | 40 |
|
| Brikksen | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 | m6-1.0 hex k lock nut with external | tooth lockwasher a2 stainless steel | tooth lockwasher a2 stainless steel | tooth lockwasher a2 stainless steel din 934 | 24500 |
| |
| Brikksen | Lock Nut, Nylon Insert | Nylon (Polyamide) | Zinc/Clear | M6-1.00 | m6-1.0 hex prevailing torque polyamide | insert lock nut zinc clear trivalent + wax | insert lock nut zinc clear trivalent + wax | insert lock nut zinc clear trivalent + wax din 985 | 16200 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 | m10-1.5 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 22100 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12-1.75 | m12-1.75 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 22400 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M14-2.00 | m14-2.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 1400 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-2.00 | m16-2.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 1350 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M18-2.50 | m18-2.5 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 700 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5-0.45 | m2.5-.45 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 2000 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M20-2.50 | m20-2.5 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 625 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M22-2.50 | m22-2.5 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 3750 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M24-3.00 | m24-3.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 2100 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 | m3-.5 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 40000 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 | m4-.7 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 70000 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | M4-0.70 | m4-.7 hex prevailing torque polyamide | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate din 985 | -4000 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 | m5-.8 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 55000 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 | m5-.8 hex prevailing torque polyamide | insert lock nut a2 stainless steel wax coated | insert lock nut a2 stainless steel wax coated | insert lock nut a2 stainless steel wax coated din 985 | inquire |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 | m6-1.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | inquire |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | M6-1.00 | m6-1.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate din 982 | 38425 |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | M6-1.00 | m6-1.0 hex prevailing torque polyamide | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate | insert lock nut a2 stainless steel chrome plate din 985 | inquire |
| |
| Brikksen | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 | m8-1.25 hex prevailing torque polyamide | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel | insert lock nut a2 stainless steel din 985 | 260500 |
| |
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M10 x 140 | m10 x 140 din 931-10.9 y/zn hex hd bolts | 2,359 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M10 x 150 | m10 x 150 din 931-10.9 y/zn hex hd bolts | 1,314 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M10 x 160 | m10 x 160 din 931-10.9 y/zn hex hd bolts | 3,590 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M10 x 180 | m10 x 180* din 931-10.9 y/zn hex hd bolts | 2,039 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M10 x 200 | m10 x 200 din 931-10.9 y/zn hex hd bolts | 796 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 20 | m12 x 20 din 933-10.9 y/zn hex hd bolts f/th | 368 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 25 | m12 x 25 din 933-10.9 y/zn hex hd bolts f/th | 2,410 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 30 | m12 x 30 din 933-10.9 y/zn hex hd bolts f/th | 7,081 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 35 | m12 x 35 din 933-10.9 y/zn hex hd bolts f/th | 4,216 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 40 | m12 x 40 din 933-10.9 y/zn hex hd bolts f/th | 7,265 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 45 | m12 x 45 din 933-10.9 y/zn hex hd bolts f/th | 5,612 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 50 | m12 x 50 din 931-10.9 y/zn hex hd bolts | 3,813 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 60 | m12 x 60 din 931-10.9 y/zn hex hd bolts | 12,045 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 65 | m12 x 65 din 931-10.9 y/zn hex hd bolts | 1,948 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 70 | m12 x 70 din 931-10.9 y/zn hex hd bolts | 6,162 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 75 | m12 x 75 din 931-10.9 y/zn hex hd bolts | 925 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 80 | m12 x 80 din 931-10.9 y/zn hex hd bolts | 3,626 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 90 | m12 x 90 din 931-10.9 y/zn hex hd bolts | 1,672 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 100 | m12 x 100 din 931-10.9 y/zn hex hd bolts | 6,405 |
|
| MetricThrd | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12 x 110 | m12 x 110 din 931-10.9 y/zn hex hd bolts | 2,658 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 3/4-16 x 2 | nf hex c/s gr. 8 | 57 |
|
| Jackson | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1 1/2 | fl phillips t/s 18-8 304 | 298 |
|
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-2.00 x 95 | socket cap a-2 ss | 12 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 1 | nc truss phillips m/s | 161 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/4-10 x 2 1/2 | nc dom.. socket hd c/s . | 31 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 7/8-9 x 6 | nc dom.. socket hd c/s . | 14 |
|
| Jackson | MS | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 2 1/4 | 1/4x2 1/4 wedge anchor 304 18-8 304 simpson #wa252144ss | 50 |
|
| Jackson | MS | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 | acorn nut 18-8 304 | 100 |
|
| Jackson | MS | Pull-Out Dowel Pin (Threaded Pin) | Steel | Plain / Furnace Black | 9 x 6 | threaded taper pin | 9 |
|
| Jackson | MS | Finished Hex Nut | Steel | Plain / Furnace Black | 7/16 | nc l.h. nut | 214 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.25 x 120 | fine pitch hex c/s partially threaded | 16 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 1/8 | truss combo slotted/phillips kanebridge# 0818mct | 4670 |
|
| Jackson | MS | Flat Head Socket Cap Screw | Brass | Plain / Furnace Black | 1/4-20 x 3/4 | flat socket capscrew | 80 |
|
| Jackson | MS | Countersunk Finishing Washer | Brass | Plain / Furnace Black | #5 | 2353 |
| |
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 1-14 x 4 1/2 | fine thread dom.. socket hd c/s . | 6 |
|
| Jackson | MS | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 7/16-14 x 3 | nc hex c/s 316 ss | 35 |
|
| Jackson | MS | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 7/16-14 x 3 1/2 | nc hex c/s 316 ss | 51 |
|
| Jackson | MS | Cap Nut (Acorn Nut) | Steel | Nickel Plated | 1/4 | nc acorn nut open end 3/8 waf small pattern | 2100 |
|
| Jackson | MS | Wood Screw | Steel | Zinc/Clear | #7 x 1 1/4 | flat phillips wood | 2500 |
|
| Jackson | MS | Wood Screw | Steel | Zinc/Clear | #14 x 1 1/2 | flat phillips wood | 2189 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
