FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Global | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #8-32 x 3/8 | flat soc c/s 18-8 ss passivate | 23 |
|
| Global | CA | Latches & Catches | wing head stud swell latch 0.88 wx0.68 lx0.44 head h | 2 |
| |||
| Global | CA | Snap Bushings, Strain Relief Bushings | 747275-1 low profile strain relief 37 posx2.275 lx0.411 h | 25 |
| |||
| Global | CA | 572-4875-01-05-19 cambion solder term 0.156 od x 0.664 l x 0.047 id | 8 |
| ||||
| Global | CA | Hex Jam Nut | 316, 317, A4 Stainless | Passivated | M16-1.50 | hex jam nut a4 (316) ss passivate b din 439 | 600 |
|
| Global | CA | 139 139 useco | 1 |
| ||||
| GLF | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 5/8 | #10 x 5/8 phillips pan hd s/m/s type-a stl zc | 3197 |
|
| GLF | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 3/8 | #6-32 x 3/8 trimmed hex hd m/s w/long lock strip 18-8 s/s | 2366 |
|
| GLF | OH | Electrical Lugs & Terminals | 12-10 | 12-10 ga non-insulated butt connector | 350 |
| ||
| GLF | OH | Screwdriving Insert Bits & Power Bits | Steel | T10 x 2 | t10 x 2 torx 1/4 power bit | 36 |
| |
| NutsBolts | NE | Pipe Elbow | Steel | Plain / Furnace Black | 3/8 | 3/8poly x 1/8p male 90 elbow | 7 |
|
| NutsBolts | NE | Pipe Elbow | Steel | Plain / Furnace Black | 3/8 | 3/8poly x 3/8p male 90 elbow | 5 |
|
| NutsBolts | NE | Hoses | Steel | Plain / Furnace Black | 1/4 | 1/4 poly hose 100ft roll | 4 |
|
| NutsBolts | NE | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 24 | 24h ss hose clamp 10/bx | 420 |
|
| NutsBolts | NE | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 40 | 40h ss hose clamp 10/bx | 88 |
|
| Bossard | AZ | Hex Head Cap Screw | Steel | Plain / Furnace Black | screw hex head cap | 14 |
| |
| NAPPCO | TX | Deburring Bits | Steel | sf-3 (3/8) radius tree s/c d/c burr usa | 6 |
| ||
| CIF | IL | Set Screw (Socket Head) | Steel | Black Oxide | 3/8-16 x 3/8 | 3/8-16 x 3/8 socket set screw steel cup point black oxide | 46 |
|
| CIF | IL | Shoulder Bolt (Stripper Bolt) | Class 12.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M8 x 16 (M6-1.00) | m8 x 16 socket shoulder bolt with m6 x 1.0 thread class 12.9 magni 575 black | 454 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 hex flange bolt grade 5 plated per tms 4518 (magni 565 black) with loctite patch per print | 45760 |
|
| Optimas | IL | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Class 12.9 | Zinc/Clear | M8-1.25 x 25 | m8-1.25 x 25 hex flange screw cl12.9 zinc triv.0002 serrated per dwg rohs (p) | 62050 |
|
| Optimas | IL | Service & Repair Kits (Bolt, Nut & Gasket Packs) | Steel | Plain / Furnace Black | gasket kit (p) | 134.54901885986331 |
| |
| Brikksen | FL | Button Head Socket Cap Screw | Steel | Plain / Furnace Black | M12-1.75 x 40 | m12-1.75 x 40 button head hex socket cap | 25 |
|
| Brikksen | FL | Wing Nut | Plain / Furnace Black | 3/8-16 | 3/8-16 wing nut asme b18.6.9 type-a | 2250 |
| |
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain / Furnace Black | M8-1.25 x 25 | m8-1.25 x 25 hex head cap screw full | inquire |
|
| Irwin Ind | Ont | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/8-16 x 1 | 3/8-16x1 unc grade 8 hex head capscrew steel zinc dichromate b18.2.1 | 547 |
|
| SWACO | OH | Grooved Pin | Steel | Zinc/Clear | 3/32 x 5/8 | 3/32x5/8 groove pin a zinc | 280 |
|
| SWACO | OH | Finished Hex Nut | Steel | Plain / Furnace Black | nutplate floating deep c bore self locking | 16 |
| |
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M4 | m4 ext tth l/w stl zi din 6797-aa | 37200 |
|
| SWACO | OH | Hitch Pin | Steel | Plain / Furnace Black | pin swage locking nas6946-05 | 15 |
| |
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #10 | #10 ext tth l/w 410 ss | 8561 |
|
| SWACO | OH | 8003523 anvil penn engr | 1 |
| ||||
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 1/2-13 x 3 1/4 | 1/2-13x3-1/4 grade 8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain / Furnace Black | 1/4 x 13/16 | 1/4x13/16 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 3/4-10 x 6 | 3/4-10x6 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain / Furnace Black | 7/16-14 x 2 1/4 | 7/16-14 x 2-1/4 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Field Fas | IL | Split Lock Washer | Steel | Zinc/Clear | M14 | m14 split lock washer stl zc | 8 |
|
| Field Fas | IL | External Type SH Retaining Ring | Steel | Phosphate | 1/2 | 1/2 ext.po retaining ring stl phos | 200 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 8 x 2 | 8x2 solid poly swivel caster | 4 |
| ||
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M4 x 60 | m4 x 60 socket cap screw steel/thermal black oxide class 12.9 | 93 |
|
| OneMonroe | MN | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M20-1.50 | m20-1.5 cl10 all metal lock nut-zp din 980v | 34 |
|
| OneMonroe | MN | Flat Washer | Steel | Zinc/Clear | .089/.094 x .245/.250 x .016/.025 | #2 f/w stl znc .089/.094 x .245/.250 x .016/.025 | 500 |
|
| OneMonroe | MN | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/16 | 5/16 h.s. 2 flute d.e. end mill | 2 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Plastic | 2 x 7/8 | caster swivel-square stem stem size 2 x 7/8 1 mounting hole 17/64 d wheel size 5 x 7/8 wheel mat polyolefin bearing delrin w/side lock brake load ht 5-3/4 load cap 145 lbs temp rt-45 to +180 f | 16 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Cadmium/Yellow | 1/4-28 x 1/2 | 1/4-28x1/2 ms90726 military hex head cap screw fine thread cadmium yellow grade 5 dfar 3300/carton | 3175 |
|
| OneMonroe | MN | Screwdrivers | 6 | blue 6 in 1 screwdriver | 2 |
| ||
| OneMonroe | MN | Machine Dies | Steel | 5/16-24 | 5/16-24 hex rethreading die | 1 |
| |
| OneMonroe | MN | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | #10-24 x 1 | 10-24 x 1 flat hd skt c/s-kerr | 20 |
|
| OneMonroe | MN | Blind Rivet | Plain / Furnace Black | celus ref a/s34d blind rivet | 700 |
| ||
| OneMonroe | MN | Toggle Bolt with Wings, Spring Toggle Anchor | Steel | Zinc/Clear | 3/16-24 | heavy-duty drywall toggle bolt 3/16-24 unc zinc-plated anchor | 500 |
|
| OneMonroe | MN | Round Female/Female Standoff | Brass | Tin Plated | captive part #-ckfb3632-10 flare-mounted standoff brass electro-tin thread-6-32/length-. | 68 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.50 x 55 | m12-1.5 x 55mm class 8.8 zinc cap screw din 960 | 50 |
|
| OneMonroe | MN | Set Screw (Socket Head) | Plain / Furnace Black | 3/8-16 x 1 | 3/8-16 x 1 soc set-cone pt | 40 |
| |
| OneMonroe | MN | Latches & Catches | 18-5368 | round corner flush latch-each 18-5368 | 6 |
| ||
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 8 | 3/8-16 x 8 gr.5 hx hd c/s-zp | 2 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 slottedround m/s pkg plated pkg qty 100 carton 5 | 100 |
|
| OneMonroe | MN | Cable Clamps & Ties | 1/8 | 1/8 wire rope cable clamp | 200 |
| ||
| OneMonroe | MN | Heavy Hex Jam Nut | Steel | Zinc/Clear | 1/4-20 | 1/4-20 hvy hx jam nut-zp | 218 |
|
| Alma Bolt | MI | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Plain / Furnace Black | 1/4-20 x 2 1/4 | 1/4-20 x 2 1/4 spin lock bolt gr5 | 700 |
|
| Alma Bolt | MI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1/2 | 5/16-18 x 1/2 st. st. flat slottedm/s | 450 |
|
| Alma Bolt | MI | Pipe Reducer | Brass | 3/4 x 3/8 | #120rje 3/4 x 3/8 brass adapter reducing | 7 |
| |
| Alma Bolt | MI | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain / Furnace Black | 1/4 x 2 | 1/4 x 2 #2838 flat head zamac nailin anchor | 1770 |
|
| Alma Bolt | MI | Carriage Bolt | Steel | Plain / Furnace Black | 7/16-14 x 4 | 7/16-14 x 4 carriage bolt | 1460 |
|
| Brikksen | FL | Wood Screw | Silicon Bronze | Plain / Furnace Black | #14 x 2 | #14 x 2 square drive flat head wood screw silicon bronze 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Painted | 1/4-20 x 2 | 1/4-20 x 2 socket wafer m/s 18-8ss/painted white | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-24 x 5/16 | 5/16-24 x 5/16 soc set cp ss 5/16-24 fine thread | inquire |
|
| Bri kksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 3/8-16 x 3 | 3/8-16 x 3 slottedflat t-316 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain / Furnace Black | #12 x 3/4 | 12 x .75 phillips pan type-a 316 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 1 1/2 | 14 x 1-1/2 phillips ovalal type-a ss/chrome- | inquire |
|
| Brikksen | FL | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 | 5/8-11 wing nut ss | 300 |
|
| Brikksen | FL | Carriage Bolt | 316, 317, A4 Stainless | Plain / Furnace Black | 5/16-18 x 2 | 5/16-18 x 2 carriage bolt 316 ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 x 1 | 6 x 1 phillips truss type-a ss | 6000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 10 | socket set screw dog point-50 per bag a2 m6-1.0 x 10 din 915 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 1 | 14 x 1 slottedhex washer a 18-8 ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 1/2 | 10-24 x 1-1/2 phillips ovalal head m/s 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Wood Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1 1/4 | #12 x 1-1/4 phillips flat head wood screw 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 5/8-11 x 4 | 5/8-11 x 4 hex head cs 316 s/s | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | 7/16 | 7/16 flat washer 316 ss-no 316 stamp .475-.485 id x .932-.942 od x .045-.065 thk bulk-generic brand | inquire |
|
| Brikksen | FL | Finished Hex Nut | Aluminum | Plain / Furnace Black | #10-24 | 10-24 nut ribbed l series aluminum grip .130/.225 rn1024225alr | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 20 | phillips ovalal head machine screw a2 ph m5-.80 x 20 din 966 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3 slottedround m/s ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M8-1.25 x 60 | socket head cap screw partial thread a4 m8-1.25 x 60 din 912 | 50 |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 | 3/8-24 nylon insert locknut 18-8 ss (3b thread + wax) fine thread | inquire |
|
| Hybroco S | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12-11 x 1 | #12-11 x 1 pan phillips type-a s/m/s 18-8 ss | 2000 |
|
| Optimas | IL | Conical Disc Spring Washer, Disc Spring, Belleville Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .190 x .375 x .020 | .190 x .375 x .020 belleville washer stainless steel tmpi quick clean | 50 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 asme b18.2.1 hex cap screw gr 5 zinc triv rohs pack of 100 | 500 |
|
| Empower H | IL | Hitch Pin | Steel | Zinc/Yellow | 2 15/16 | hpyz532hitch pin yellow zincdiameter 5/32 length 2-15/16 | 15018 |
|
| Empower H | IL | Shackles (Anchor, Snap, etc.) | 316, 317, A4 Stainless | Plain / Furnace Black | 225ss12swivel eye bolt snapstainless steel-type-316snap opening 3/8 overall length 3-1/2 eye size 1/2 | 1270 |
| |
| Delta | TX | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | 5/16-18 x 1 | flat soc c/s alloy 5/16-18x1 | 130 |
|
| IndexFast | CA | Protective Caps & Plugs | Steel | Nickel Plated | 1 | protective caps & plugs plastic 47 ss 48166 k1110 eq _x000d_plug button 1 steel/nickel .093-.125 _x000d_d4036 sn ss 48166 k1110 eq _x000d_plug button 1 steel/nickel .093-.125 _x000d_d4036 sn | 14800 |
|
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | finished hex nut 18-8 stainless plain | 53 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | hex head cap screw grade 5 zinc/clear | 632 |
| |
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/4-28 x 1 1/4 | 1/4-28x1-1/4 phil flat 82_x0015_ m/s s/s pass | 1 |
|
| AIH | AZ | Electrical Lugs & Terminals | 1-20 x 1.219 | 1-20x1.219 connector receptacle electric box mounting | 1 |
| ||
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4-10 | 3/4-10 hex jam nut 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Yellow | #8 x 1 3/4 | 8 x 1-3/4 phillips ovalal type-a ss/zinc yellow dark oil rub brown | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #10-24 x 3/4 | 10-24 x 3/4 button socket cs 316ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 slotted truss m/s ss | inquire |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | Aluminum | #16 | #16 (1 ) cushion clamp aluminum 10 per small bag 5 small bags per master pack-generic brand | 10000 |
| |
| Brikksen | FL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 hex hd gr 5 stl/zc 847010 | 300 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 3 | 10-32 x 3 soc hd cs ss | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #8-32 x 5/8 | 8-32 x 5/8 phillips flat m/s 316ss | 5000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8 x 2 1/2 | 8 x 2-1/2 phillips pan type-a ss/black gloss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #8-32 x 1 | 8-32 x 1 phillips truss m/s ss w/cvs black cvs black | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 x 110 | socket head cap screw partial thread a2 m10-1.5 x 110 din 912 | 100 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #4-20 x 1/4 | 4-20 x 1/4 phillips pan head 48-2 trilobe thread forming screw 18-8 stainless steel passivated & wax | 59000 |
|
| FasSpcMfg | FL | Sockets | Brass | #6-32 x 1/8 | 6-32 x 1/8 socket set cup point brass | 1700 |
| |
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 x 2 1/4 | 5/8-11 x 2-1/4 socket cap 18-8 stainless 2a fit drilled head one hole through two broaches for safety wire | 2 |
|
| OneMonroe | MA | Carriage Bolt | Steel | Black Oxide | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 carriage bolt blk ox black oxide finish | 200 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 5/8 | phillips pan head ms 304 ss #10-32 x 5/8 | 689 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 3/4 | torx pan head ms 304 ss #4-40 x 3/4 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 7/8-9 x 5 | hex cap screws 316 ss 7/8-9 x 5 pt | 1 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #5-40 x 3/8 | button head socket cap screws 316 ss #5-40 x 3/8 | 400 |
|
| Raw Produ | NJ | Lag Screw | Steel | Galvanized | 1/2-6 x 3 | hex lag screws hdg 1/2-6 x 3 | 2886 |
|
| Raw Produ | NJ | Flange Screw w/o serr. (Frame Bolt) | Steel | Zinc/Clear | M8-1.25 x 30 | hex flange bolts jis head non-serrated zinc m8-1.25 x 30m | 500 |
|
| Raw Produ | NJ | Square Nut | Steel | Zinc/Clear | 3/4-10 | square nuts zinc 3/4-10 | 150 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | cls-632-1-07 pem southco ref-m45938/1-8cself-clinching nut | 3842 |
| ||
| AEROSPCE | MN | 6925-ss raf precision shoulder | 344 |
| ||||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | s-m2.5-1zi pem self-clinching nut heat treated | 144 |
| ||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 300 | sp-032-2 pem 300 nut-stamped=a286sst grooved= | 1102 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1/2 | slotted binding machine screw 10-32x1/2 18.8 | 90 |
|
| F. Solutions | OH | Heavy Hex Nut | Grade 2H | Zinc/Clear | 3/4-16 | heavy hex nut 3/4-16(unf) sa194 2h zinc plated | 32 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 20 | phillips flat machine screw m6-1.0x20 a2 ss | 25 |
|
| Bossard | AZ | tuts 10-32 x 7/8 ss 18-8 | 4865 |
| ||||
| National | Ont | 5/16-18x1-3/16 int vib mnt rub | 147 |
| ||||
| Mansco | MI | Screwdriving Insert Bits & Power Bits | t30 x 31/2 | t30x3-1/2 oal torx power drive bit w/1/4 hex | 5 |
| ||
| Mansco | MI | Ball Bearings, Balls, Bearing Mounts | Plain / Furnace Black | .625 id x .8745 od x .786 wide inner ring for bearing | 40 |
| ||
| Mansco | MI | Flat Head Socket Cap Screw | Steel | Zinc/Clear | 3/8-24 x 2 1/2 | 3/8-24x2-1/2 flat hd soc cap scr triv znc | 40 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | M6 x 12 | m6x12 phil pan ms st zn rohs din 7985a () | 1574 |
|
| AFI | FL | Button Head Socket Cap Screw | Steel | Zinc/Clear | 1/4-20 x 3/ 4 | 1/4-20x3/4 button soc hd cs st zn () () | 3999 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #2-56 x 1/8 | 2-56x1/8 slotted pan ms st zn () () | 6430 |
|
| Olander | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 10-24 x 1 but soc sst | 470 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 1/4/m6 heli-coil tbo punch | 1 |
| ||
| Olander | CA | Finished Hex Nut | Steel | Zinc/Clear | 1 1/2-6 hex nut stl zn cr3 | 26 |
| |
| Olander | CA | Hex Jam Nut | Steel | Zinc/Clear | 5/16-18 jam nut stl zn cr3 | 100 |
| |
| Olander | CA | Cable Clamps & Ties | Nylon (Polyamide) | Plain / Furnace Black | cable tie scr mount blk nyl 6 8 scr si | 90 |
| |
| Olander | CA | Grommets & Eyelets | atlantic gromm 5/8 id for 7/8 hole () | 230 |
| |||
| Olander | CA | Captive Panel Screw | captv pnl scr () () | 48 |
| |||
| Olander | CA | Socket Head Cap Screw | ASTM A574 | Zinc/Clear | #8-32 x 5/8 | 8-32x5/8 soc cap torx alloy zn nonrohs () | 3000 |
|
| Olander | CA | Hex Male/Female Standoff | Aluminum | Zinc/Clear | #4-40 x 13/16 x 1/4 | 4-40 x 13/16 x 1/4 hx m/f rohs alum () () | 566 |
|
| Olander | CA | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x .500 x .062 | 5/16 x .500 od x .062 thk f/w nyl blk () () | 4498 |
|
| Olander | CA | Finished Hex Nut | Steel | Plain / Furnace Black | #4-40 | 4-40 nutplt () () | 100 |
|
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2-56 x 5/16 | 2-56 x 5/16 phil flat u/c patch sst rohs () () | 95 |
|
| Olander | CA | Flat Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | f/w teflon .125-.250-.010 () () | 1510 |
| |
| F. Solutions | OH | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M12-1.75 | nylon insert lock nut m12-1.75 zinc plated din 985 | 1514 |
|
| F. Solutions | OH | Cable Clamps & Ties | tie mount 8 .585x.375 panduit tm2s8-c100 | 900 |
| |||
| Stelfast | OH | Tension Control Bolt (F3125 Gr. F1852, F2280) | ASTM A563 Grade DH | Galvanized | 3/4-10 x 2 1/2 | 3/4-10x2-1/2 tc dome hd bolt a325 (f1852) assem a563-dh heavy hex nut&f436 washer mechgalv steelkeg usa | inquire |
|
| Parker | AZ | Socket Head Cap Screw | ASTM A574 | Passivated | #4-40 x 1 | 4-40 x 1.0 socket head cap screw fully threaded a286 super alloy passivate ff-s-86 per nas1352n04-16 made in u.s.a. | 15350 |
|
| Arden | WI | Machine Screw | Steel | Plain / Furnace Black | #10-24 x 3/4 | 1024x3/4 slotted round ms 10c | inquire |
|
| Arden | WI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10 x 5/8 | 10x5/8 unslotted hwh w/nib #3 point zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M14-2.00 x 25 | M14x2.0x25 hcs 10.9 ft olive | inquire |
|
| THRDFAST | MS | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 x 45 | a2 ss flat socket c/s | 68 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 1 1/2-8 x 13 1/4 | astm a193 b7 all thread stud | 359 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Plain / Furnace Black | 1-8 x 3 1/2 | astm a193 gr. b8 class 2 all thread stud ss | 604 |
|
| Lightning | LA | Machine Screw Style Anchor, Caulk-In Anchor | Steel | Plain / Furnace Black | 5/16 | lead anchor | 255 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain / Furnace Black | 2-8 x 15 1/4 | astm a193 gr. b16 all thread stud | 710 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
