Flat Slotted Cap Screws

Flat Head Slotted Cap Screws are designed to be seated in countersunk holes, and align flush with the surface of the assembly when installed. A flat headed slotted cap screw includes a flat top surface, a milled slot, and a conical bearing surface with a head angle of 82°. Flat head slotted cap screws are usually fully threaded and are most often used for assembling close tolerance machinery where head clearance is critical.

Flat Slotted Cap Screws Diameters

Flat Slotted Cap Screws are available on the FCH Network with Imperial/US diameters that range from #1 to 1 1/2 and with Metric diameters that range from M4 to M16. The length of Flat Slotted Cap Screws is usually measured from the point to the underside of the head.

Click on the diameters below to view or Search All Flat Slotted Cap Screws
Metric diameters
Flat Slotted Cap Screws Lengths

Flat Slotted Cap Screws are available on the FCH Network with lengths that range from 1/4 to 14.

Click on the lengths below to view or
Search All Flat Slotted Cap Screws
Flat Slotted Cap Screws Materials

Flat Slotted Cap Screws are available on the FCH Network in materials that range from Steel to Nylon (Polyamide)

Click on the materials below to view or Search All Flat Slotted Cap Screws
Flat Slotted Cap Screws Finishes

Flat Slotted Cap Screws are available on the FCH Network in finishes or coatings that range from Plain to Cadmium

Click on the finishes below to view or Search All Flat Slotted Cap Screws