Quality Component Supply & Mfg., Inc.
FCH Member Advertisement
DIN 7338 Flat Head Semi-Tubular Rivet for Brake and Clutch Linings (Types A, B, C) by Material, Finish and Size
Semi-Tubular Rivets are similar to Full-Tubular Rivets: the difference being in the depth of the hollow shank. A semi-tubular rivet has a much shallower hollow shank. Like all rivets, the purpose is to clamp two materials tightly together, and to achieve this, the length of the rivet shank and the depth of the tubular portion of the shank must be such that it can pass through the thickness of the parts to be clamped. Installation requires an anvil that bends the shank of the rivet outwards, locking the pieces in place.
Search thousands of Metric fasteners by DIN specification, including DIN 7338 Semi-Tubular Rivets , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.
DIN 7338 Semi-Tubular Rivets by Metric Sizes
Semi-Tubular Rivets are available on the FCH Network with metric diameters that range from M4 to M6, and with metric lengths that range from 8mm to 20mm.
Shop All DIN 7338 Semi-Tubular Rivets
DIN 7338 Semi-Tubular Rivets by Imperial/ Sizes
Semi-Tubular Rivets are available on the FCH Network with imperial diameters that range from 5 to 5, and with lengths that range from 8 to 8.
Shop All DIN 7338 Semi-Tubular Rivets
DIN 7338 Semi-Tubular Rivets by Materials
DIN 7338 Semi-Tubular Rivets are available on the FCH Network in materials that range from Copper to Copper.
DIN 7338 Semi-Tubular Rivets by Coatings/Finishes
DIN 7338 Semi-Tubular Rivets are available on the FCH Network in finishes or coatings that range from Plain to Plain.